Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹18.1 L
EMD Value
₹36,288
Closing Date
26 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Overhaul Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Overhaul Division Bangalore - 560 017
ALUMINIUM WORKS FOR DOORS WINDOWS, VENTILATORS PARTITIONS ALONG WITH ASSOCIATED CIVIL WORKS AT VARIOUS PLACES IN OVERHAUL DIVISION HAL BC
9600
OH/PM/TN/C-087/24-25
Works
Bangalore Complex-Overhaul division
₹0
₹36,288
26 Sept 2024
6 Sept 2024
6 Sept 2024
26 Sept 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE OVERHAUL DIVISION
NAME OF THE WORK: “ ALUMINIUM WORKS FOR DOORS, WINDOWS, VENTILATORS, PARTITIONS ALONG WITH ASSOCIATED CIVIL WORKS AT VARIOUS PLACES IN OVERHAUL DIVISION, HAL (BC) ." CONTRACT NO. HAL/OVL/C-087/24-25
Name of the Tenderer:
Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.
A DISMANTLING WORKS
1 Dismantling of old plaster or skirting raking out joints and cleaning the surrface for plaster including disposal of rubbish to the dumping ground within 50meters lead 140.00 Sqm 50.21 #NAME? 7029.19
2 Taking out doors,windows and clerestory shutters(steel or wood) including stacking within 50metrs lead of
of area 3 sqm and below 7.00 Each 131.84 #NAME? 922.86
of area beyond 3 sqm 170.00 Each 173.55 #NAME? 29503.14
3 Dismantling of wooden boading in lining of walls and partition execluding supporting members but including stacking within 50 meters lead .15.39.2: Thickness above 10mm thick to 25mm 160.00 Sqm 71.43 #NAME? 11428.99
B BRICKWORK AND PLASTERING
4 Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 7.00 Sqm 1057.00 #NAME? 7398.98
5 Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall 160.00 Sqm 351.87 #NAME? 56299.70
C PAINTING WORKS
6 Applying priming coats with primer of approved brand and manufcature having VOC content. 13.85.3: With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 160.00 Sqm 67.94 #NAME? 10870.40
7 Applying with ready mixed red oxide zinc chromite primer of apporved brand and manufacturer on steel galvanized iron / steel works 25.00 Sqm 61.92 #NAME? 1548.06
8 Providing and applying white cement based wall care putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 20.00 Sqm 143.37 #NAME? 2867.35
9 Finishing walls with Premium Acrylic Smooth exterior paint(Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface) with Silicone additives of required shade: Old work 160.00 Sqm 120.63 #NAME? 19300.65
10 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on new work. 25.00 Sqm 143.23 #NAME? 3580.75
D STRUCTURAL STEEL WORKS:
11 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 650.00 Kgs 122.83 #NAME? 79842.13
E ALUMINIUM WORKS
12 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
12a For Fixed Portion
12a.1 Anodized Aluminium (anodized tranparent or dyed to required shade (Min anodic coating of grafe AC 15) 475.00 Kg 454.82 #NAME? 216037.93
12b Powder coated aluminium (minimum thickness of powder coating 50 microns) 655.00 Kg 487.75 #NAME? 319478.30
13 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
13a Anodised aluminium (anodised transparent or dyed to required shade , Minimum anodic coating of grade AC 15) 115.00 Kg 549.95 #NAME? 63244.37
13b Powder coated aluminium (minimum thickness of powder coating 50 microns) 355.00 Kg 582.89 #NAME? 206925.06
14 Providing and fixing 12mm thick pre-laminated particle board (decorative lamination on one side and balancing lamination on other side)flat pressed three layer or graded wood particle board confirming to IS:12823 Grade I,type II,in panelling fixed in aluminium doors,windows,shutters and partition frames with C.P. brass/stainless steel screws etc.,complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. 100.00 Sqm 1046.71 #NAME? 104670.77
15 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 215.00 Sqm 1382.92 #NAME? 297327.06
16 Providing and fixing one number per track fly proof SS wire gauge to windows using SS wire gauge(grafe 304) with avergae width of aperture 1.4mm with wire dia 0.5mm all complete into the shutters of window frame as specified by the EIC/OIC. 50.00 Sqm 629.16 #NAME? 31457.92
17 Filling the gap in between aluminium frame &adjecent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of apporved quality as per architectural drawings and direction of EIC .21.8.1: up to 5mm depth and 5mm width 475.00 Rmt 88.89 #NAME? 42221.33
F ALUMINIUM FITTINGS AND FIXTURES
18 Providing and Fixing of alumnium sliding door bolts 300x16mm size ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 15.00 Nos 278.60 #NAME? 4179.07
19 Providing and Fixing alumnium tower bolts 250 x10mm size , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 20.00 Nos 105.79 #NAME? 2115.83
20 Providing and Fixing alumnium handles 125mm long , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 15.00 Nos 60.87 #NAME? 912.99
21 Providing and Fixing alumnium hanging Single rubber floor door stopper , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 15.00 Nos 36.38 #NAME? 545.72
22 Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 )alumnium lever handles of approed quality with necessary screws etc complete 10.00 Nos 798.33 #NAME? 7983.29
23 Providing and Fixing alumnium extruded section body tubular type universal hydralic door closer (having brand logo with ISI mark) embosed on the body ,door weight up to 36kgs to 80 kg and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws etc complete 10.00 Nos 903.25 #NAME? 9032.48
24 Providing and fixing ISI marked oxidised MS door latches of size 300x20x6mm conforming to IS 5930 with screws etc complte.(copper oxidised as per IS 1378) 10.00 Nos 90.36 #NAME? 903.57
Total (Excluding GST) #NAME? 1537627.91
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 1537627.91 ABOVE % 1537627.91
Add 18% GST #NAME? 276773.02
Grand Total (Including GST) #NAME? 1814400.93
Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
Overhaul Division
Pre-Qulification Profile
Tender Ref No. or Contract No.: HAL/OVL/C-087/24-25
Name of Work: ALUMINIUM WORKS FOR DOORS, WINDOWS, VENTILATORS, PARTITIONS ALONG WITH ASSOCIATED CIVIL WORKS AT VARIOUS PLACES IN OVERHAUL DIVISION, HAL (BC)
Estimated Amount in Rs.: Rs.18,14,400/- including GST
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address for correspondence:
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code #N/A #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No.
Name of the Bank
Type of Account
9 Details of person holding the power of Attorney (If different from contact person)
Ph. No. with STD code
FAX No. with STD code
10 DECLARATION I
The document have been read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 160) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
11 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be submitted for evaluation of offer.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
1.TenderNotice-TNC087.pdf
TENDER_DOCUMENT • 0.92 MB
3.Undertaking-C087.pdf
TENDER_DOCUMENT • 0.24 MB
4.ECSbankDetailsC087.pdf
TENDER_DOCUMENT • 0.01 MB
6.PriceBidC087.xlsm
TENDER_DOCUMENT • 0.04 MB
5.PreQualnC087.xlsm
TENDER_DOCUMENT • 0.02 MB
2.TenderBid-TBC087.pdf
TENDER_DOCUMENT • 4.27 MB
6.PriceBid-C087.pdf
TENDER_DOCUMENT • 0.22 MB
5.PreQualn-C087.pdf
TENDER_DOCUMENT • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .