REPAIR TO ROOFS, REPLACEMENT OF ROOF SHEETS, RAILINGS, DOORS, WINDOWS, TILING, PLUMBING WORK, HARD STANDING, OVER HEAD TANKS CLEANING AT AF STN RAJOKRI UNDER AGE BR RAJOKRI OF GE AF GURGAON

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings Complete all as specified and directed.

S & F Pre -Painting galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall fixed with self tapping screws complete all as specified

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S & F Plates ( plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F framed work such as grills gratings, etc with ends of bar shouldered and/or revited or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanks and similar works confirming to Fe 290 Gde E-165 complete all as specified

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for complete all as specified and as directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed

M&L for machine presssd pre-cast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved complete all as specified and as directed

M & L sand filling under interlocking tiles for cushioning etc as complete etc complete all as specified and as directed

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in coping benching, gola and similar items all as specified

Taking down existing unserviceable water proofing treatment from roof slab including plaster and cleaning the roof slab by wire brush and removing the debries and WPT felt beyond the premises of MD land.

M&L for 15 mm thick plaster in CM (1:3) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately

Supply only Water Proofing Compound

M & L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete as all specified and as directed

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster without aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer's instructions of APP modified membrane sheet complete all as spd and directed.

M&L for gunniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement plumb and making surface true to geometry in line and including necessary form work to be carried at upto single story building Note.- Where ever reinforcement required will be measured and paid seperatly etc complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required incl cranking bending for hoping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper on walls complete all as specified and as directed.

All as per item No- above but on surfaces of ceiling.

All as per item No- above but applying two coats of Cement base paint on walls complete all as specified and directed.

M & L for providing 3mm thick wall care putty on wall before applying Oil bound Distemper and making the surface uniform all as specified and directed.

M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick plastering in CM 1:4 on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair without using extra cement complete all as specified

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of suitable primer on walls. complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as spd.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of Oil Bound distemper over one coat of primer complete all as specified.

M&L rendering 10mm thick in CM 1:3 as in ceilings finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of Ceiling and applying two coats of Oil Bound distemper over one coat of primer complete all as specified

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for bedding of tiles complete all as specified and as directed.

M&L 10 mm thick rendering in CM 1:4 on vertical surfaces for backing of tiles complete all as specifed and directed.

M&L for non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirting etc, set and jointed in neat cement slury and pointed in white or coloured cement to match complete all as spd and directed.

M&L Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 7mm/450x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed

S&Fixed in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Description same as per item No 1above but exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm and removing from site.

Taking down shutter of any description n.exc 1 Sqm and removing from site.

S&F factory made 35mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F 35mm thick second class hard wood locally fabricated, plain framed panelled door shutter (any number of panels) with panel of 9mm thick BWP commercial plywood or 12mm thick veneered particle board medium dencity, wood partical board with commercial face veneers. The size of members of shutters shall be as specified in section 8 clause 8.20 (a) of SSR Part-I 1991.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing. Make:- Rajshri

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified. Make:- Rajshri

S & F 75 mm Butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified and as directed

S & F 100 mm Butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified and as directed

S&F 100 mm size but hinges type C-21 extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, complete all as specified and as directed

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section. Complete all as specified and as directed

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section. Complete all as specified and as directed

S & F 100 mm size extruded aluminium alloy handles cast type anodised and fixed.

S & F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed.

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.

Dismantling boarding of any description , fixed in any position with nails complete all as specified and as directed.

S&F 25mm thick flush shutters, as in cupboard , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F 18 to 19mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F as in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed.

Hacking out old broken glass ordinary quality or description from wooden or metal frames glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads complete all as specified and directed.

S&F 105X60mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 125X60mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series (Note : Glass and wiremesh shall be measured and paid separately under respective items)

S&F galvanised stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads/ fixed with including neopune rubber gasket complete all as specified and directed.

S&F in repair fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&Fixed in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed.

S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&Fixed in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F vitreous china bowl urinal flat back of size 465 x 355x 265 mm, white including grating and union for discharge pipe, including waste pipe and including fixing plugs beading urinal against wall in CM 1:2, securing urinal to plugs with brass screws 60 mm long, pointing around urinal in white cement specified and directed.

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and as directed

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

Disconnecting existing water tank of capacity exc. 250 ltr but not exc. 500 ltr, setting aside (or lowering of required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position on roof after cleaning with suitable chemical and removing all scale & dirt etc. from tank and from mout of pipes complete all as specified and directed.

Disconnecting existing water tank of capacity exc. 500 ltr but not exc. 1000 ltr, setting aside (or lowering of required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in position on roof after cleaning with suitable chemical and removing all scale & dirt etc. from tank and from mout of pipes complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed

M/S GEETANJALI ENTERPRISES

JAIPAL AND BROTHERS

KISHAN SINGH AND CO

M/S CHANDER MUNI

M/S Sanjay Enterprises