PROVISION OF 70000LTR SUMP AT NARANGI AND SPECIAL REPAIR TO DINING HALL NEAR BLDG NO P 115 UNDER GE NARANGI

Amount

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as specified and as directed

Supply and fixing Corrugated galvanized steel sheeting 0.63mm thick ( 120 gram galvanization per SQM) with two corrugation side laps and fixed with 'L' type or 'J' type hooks or cranked hook bolts and washers in roof/wall complete all as specified and as directed

Fixing only Corrugated galvanized steel sheeting any thickness with two corrugation side laps and fixed with new 'L' type or 'J' type hooks or cranked hook bolts and washers in roof/wall complete all as specified and as directed

Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 SQM complete all as specified and as directed

Taking down chowkats or frames exceeding 1.5 SQM but not exceeding 4 SQM in each (without taking off shutters from the frame) complete all as specified and as directed

Demolition of brick work including all quains and arches pillars etc built in cement mortar complete all as specified and as directed

Materials and labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 and complete all as specified and as directed

All as item No. 7 above but except bricks complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

Materials and labour for 10 mm thick rendering in cement mortar 1:6 on brick/ concrete surfaces and finishing the surfaces even and fair etc complete all as specified and as directed

Materials and labour for rendering 5 mm thick on bricks or concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and as directed.

Materials and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work as in compound wall finished even and smooth without using extra cement complete all as specified and as directed

Materials and labour for prepration of newaly plaster surfaces of wall, applying a coat of wall care putty not less than 1.5 mm thick and two coat of acrylic distemper over one coat of primer complete all as specified and directed .

Materials and labour for preparation of newely plastered surface of walls and applying two coats of cement based paint over one coat of alkali resitant primer complete all as specified and directed.

Materials and labour for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors, double rebates incl necessary fixing lugs, 03 Nos 100mm size stainless steel (03 Nos for each shutter), lock strike plate, filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5 graded stone aggregate) etc. complete all as specified and as directed.

Supply and fixing 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and as directed

Supply and fixing 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed

Supply and fixing anodized aluminium sliding glazed window shutter (double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodized aluminium shutter of section 40.00mmx20.00mmx1.10mm thick and window chowkat of section 92.00mmx29.50mmx1.20mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, tower bolts and locking arrangement etc. and including 4mm thick sheet glass, tinted quality on panel and stainless steel wirecloth or aluminium anodized wire cloth for mosquito proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Supply and fix mild steel framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

Supply and fixing 150mm in size extruded aluminium handles, fabricated type, anodised complete all as specified and as directed

Supply and fixing aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed

Supply and fixing strainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed

Materials and labour for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Materials and labour for preparation of new or previously untreated surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and as directed

Materials and labour for glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps over and including 10 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

Materials and labour for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match existing surfaces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

Dismantling of stone slabs and tiles of any description or thickness in floors/aprons laid bedded and pointed in any mortar

Materials and labour for 20mm thick granite ( any type) machine cut ,as in steps, jambs, pillars, window cills, cookong platforms and the like laid over cement screed of 15mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixtures of pigments match the shade of granite stone including rubbing and polishing complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed

Materials and labour for suspended false ceiling using E-grid (exposed ceiling suspension system) of grid size 600x600mm with main runner 38mmx24mm and wall angle 24mmx24mm using 4mm thick Non Asbestos fiber cement designer board (E-Board classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c, the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c so as to from 600x600mm grid and painted with two coats of OBD over a coat of primer before installing it on the grid complete all as specified and as directed

Surface excavation n.exc 30cm deep & averaging 15cm deep & getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed.

Excavating over areas exc. 1.50m but n. exc 3.00m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Removing excavated soil not exc 200 m and depositing where directed at a level not exc 1.5 m above the starting point etc complete all as specified and as directed.

Materials and labour for hardcore (broken stone or bolder) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving next 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not oterwise specifically provided for complete all as specified and as directed

Materials and labour for 100 mm thick plain cement concrete (1:2:4) type B2 using (40 mm graded crushed stone aggregate) as in flooring/ hard standing etc complete all as specified and as directed

Materials and labour for PCC 1:2:4 type B-1, (20mm graded stone aggregate), 50mm thick concrete even and rough without using extra cement as in hard standing complete all as specified and as directed.

Materials and labour for PCC 1:4:8 type D2, (40mm graded stone aggregate), 75mm thick concrete even and rough without using extra cement as in hardstanding/sub basecomplete all as specified and as directed.

Materials and labour for PCC type M-20 (1:1.5:3) 20 mm graded stone aggregate in foundation , filling and mass concrete complete all as specified and as directed.

Materials and labour for RCC M-30 (design mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Materials and labour for RCC M-30 (design mix) as in Walls, basement walls, and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

Materials and labour for RCC M-25 (design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Materials and labour for RCC M-25 (design mix) as in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and as directed.

Materials and labour for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work including necessary form work etc complete all as specified and as directed. Note :-Reinforcement will be measured and paid separately

Materials and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed

Materials and labour for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.

Materials and labour for formwork (rough finished surface and flat) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Materials and labour for formwork (rough finished surface and flat) Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.

Materials and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of flat concrete complete all as specified and as directed.

Supply, laying and testing ductile iron pressure pipe socket and spigot end, class K-7, confirming to IS-8329/2000 blast furnace slag cement with portland cement properties suitable for Push - on- joint with inside cement mortar lining, internal metallic zinc coationg and external black bitumen coating of size 100 mm dia duly ISI marked laid in trenches etc and making good distrubed surface complete all as specified and as directed.d.

Supply and fixing steel tubes medium grade galvanised 50 mm bore with all fittings laid in trenches complete all as specified and as directed.

Supply and fixing 50 mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipes or for unions per IS : 778-84 Marked CL-1 Pressure tested 2.4 Mpa complete all as specified and as directed.

Material and labour for cutting the existing CI/DI water mains for addn/altrn or for taking branch connections/insertion of new Tees, branches of the 100 mm bore size complete all as specified and as directed.

Materials and labour for CI/ DI fittings for spigot and socket pipes of size upto 200 mm bore such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars caps and plugs complete all as specified and as directed.

Supply and fixing sluice valve (Heavy Duty) with stainless steel spindle heavy duty conforming to IS 14846 (2000) both end flanged clss PN 1.6 of size 100 mm dia including necessary nuts, bolts washers and gasket complete all as specified and as directed

Supply and fixing sluice valve (Heavy Duty) with stainless steel spindle heavy duty conforming to IS 14846 (2000) both end flanged clss PN 1.6 of size 250 mm dia including necessary nuts, bolts washers and gasket complete all as specified and as directed

Materials and labour for making cutting on existing internal road of 3.65 m wide for laying various size of DI pipe under road and got it repair the road cutting repair PCC (1:2:4) and match with existing road surface complete.

Supply, installation, commissioning and testing of Horizontal openwell submersible Pump set Electric driven at three phase AC, 415 Volt (+ 5% & +10%), 50 Hz to pump water from sump to line at uniform flow rate , having CI casing & Impeller, high carbon steel shaft, sealing: double Mechanical seal arrangement class B Insulation, Protection - IP 68, Discharge 13.5 LPS at 30 mtr head water discharge pumpset (not less than 10 HP) suitable for suction and delivery pipe 100 mm bore,complete all as specified and as directed. .[Note: - Unit rate quoted by the tenderer is deemed to be inclusive of the following: - (a) Supply and fixing Nesessary special CI fittings and all other fixtures to fix the pump-motor in sump. (b) Supply and fixing One pressure guage 4" dia with valve tee and fittings. (c) Supply and fixing Delivery pipe 100mm dia MS medium grade from pump set to delivery pipe flanged type with clamps complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing all as required. Length of pipe to be measured and paid under relevant items. (d) Supply and fixing MS chain closed type of size 6mm including round ring insert on every mtr include chain lock, Nuts & Bolts fixed on submersible pump complete all as specified and as directed.

Material and labour for construction of brick masonry valve pit of size 150 cm x150cm x 120 cm (internal dimensions), using old size sub class 'B' brick, built in CM 1:6 and 10 mm thick cement plaster 1:4 both internally and externally with 75 mm thick PCC 1:3:6 type C-2 in foundation, PCC 1:2:4 type B-2 in benching complete with and including 2 mm thick mild steel sheet cover (mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick, embedded in PCC 1:2:4 type B-1 coping), fitted with proper locking arrangement, hinges and handle of suitable size and painting with two coats of black bituminous paint over a coat of red oxide zinc chrome primer on all steel surfaces, including necessary earth work ( in soft/loose soil), returning filling and removal of surplus soil to a distance n.exc 50 m complete all as specified and as directed.

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed.

Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody all as directed.

Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC rigid conduit on walls/ceiling ( concealed), with MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item serial No 71 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches

All as per item serial No 71 here-in-before but One socket outlet 3 pin 6 Amp on independent board.

All as per item serial No 71 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable.

Supply and fixing switch modular type 6 Amp 240 Volts single one way (ISI marked)

Supply and fixing modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fixing modular switch 1 way 16 amp, 1 module complete all as specified and as directed.

Supply and fixing modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fixing stepped type modular electronic fan regulator, two module size, flush type complete all as directed.

Supply and fixing ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed

Supply and fixing modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing modular white cover plate with frame, 2 module

Supply and fixing modular white cover plate with frame, 4 module

Supply and fixing modular white cover plate with frame, 6 module

Supply and fixing modular white cover plate with frame, 8 module

Supply and fixing metal flush box 4 module for modular switches

Supply and fixing metal flush box 6 module for modular switches

Supply and fixing metal flush box 8 module for modular switches

Supply and fixing metal flush box 1/2 module for modular switches

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as directed.

Supply & fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate.

Supply & fix in repair/replacement MCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed.

Supply and fixing in repair/replacement MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed.

Supply and fixing in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule)

Supply and fixing in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule)

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and taking down old one testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

Supply and fixing in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and as directed.

Materials and labour for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and as directed.

Materials and labour for sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and as directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.

Materials and labour for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and as directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Supply and fixing steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16.00 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, and taking down complete all as specified and as directed.

Materials and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35.00sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

Material and labour well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.

V.V.Construction (BID ID -3236410)