Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.9 LAccepted-AOC LOONPURIA GAON AT ROAD PANITOLA PO PANITOLA 786183 DIST TINSUKIA ASSAM | TINSUKIA | ASSAM | 786183 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹50.4 L+₹2.8 L (5.91%)Rejected-Finance AT ROAD NEAR MES TINALI PO CHABUA DIST DIBRUGARH ASSAM | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹51.6 L+₹4.0 L (8.40%)Rejected-Finance P O WEST SRIPURIA DIST TINSUKIA ASSAM PIN 786 145 | TINSUKIA | ASSAM | 786145 | L3 | Rejected-Finance NOT BEING L1 | |
| 4 | L4₹51.8 L+₹4.2 L (8.80%)Rejected-Finance | L4 | Rejected-Finance NOT BEING L1 | |
| 5 | L5₹52.0 L+₹4.4 L (9.23%)Rejected-Finance | L5 | Rejected-Finance NOT BEING L1 |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
20 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DINJAN
GE DINJAN, PANITOLA (PO), DIBRUGARH (DIST), ASSAM PIN-786183
REPAIR TO ROOF, CEILING, JOINERY, SANITARY FITTING IN DEFENCE CIVILIAN MD ACCN UNDER AGE BR-II AND REPAIR REPLACEMENT OF SECURITY LIGHT TIMMER, CONNECTED ALLIED SERVICES AT DINJAN MIL STN UNDER GE DINJAN
2024_MES_651676_1
C/8660/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
DINJAN MIL STN
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE DINJAN
₹94,000
Yes
6 Jul 2024
30 Apr 2024
27 May 2024
30 Apr 2024
20 May 2024
14 May 2024
Amount
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
Dismantling of timber boarding, any description, fixed in any position with nails complete all as specified and as directed.
Dismantling of framework timber scantling 40Sqcm and over in section, fixed in any position complete all as specified and as directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar in (1:4) complete all as specified and as directed
M&L for plain cement concrete (1:4:8), type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for 75 mm thick plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in sub base of floor, etc complete all as specified and as directed.
M&L for 75 mm thick plain cement concrete (1:3:6), type C1,(using 20mm graded stone aggregate) as in plinth protection, finishing surface even and smooth without using extra cement, complete all as specified and as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. over 10 mm thick back coat of cement mortar in (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.
M&L for coloured glazed ceramic tiles in vertical surface of size 450X 300X 7 mm thick over 10 mm thick back coat of cement mortar in (1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.
M&L for prepolished, chequered cement concrete tiles of size 25cmx25cmx22mm thick, as in floors etc, including 15 mm thick screed bed or bedding in cement mortar (1:6) and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed.
M&L for granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement mortar (1:4) using water proofing compound in top layer (water proofing compound measured as separately) and finished even and smooth without using extra cement complete all as specified and directed.
Supply only water proofing compound complete all as specified and directed.
Demolition of reed, lathing, single or double including battens and plaster or chicken wire lathing complete all as specified and as directed.
M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste fixed with tinned tacks of wire staples complete all as specified and as directed.
M&L for rendering 20 mm thick (15+5) externally one side of lathing in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement, mixed with integral water proofing compound @ 2% by weight of cement on top layer surface complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).
M&L for rendering 15 mm thick on one side of lathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L for Reinforced Cement Concrete 1:2:4, type B-1 (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed. (Note : reinforcement shall be measured and paid separately against respective item).
S&F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide Rough finished surface of concrete, flat complete all as specified and as directed.
M&L for second class hard wood timber scantling, clean swan as in frame work, fixed with nails complete all as specified and directed.
S&F in repairs curtain rails, Harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.
S&F for Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F in repairs Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Dismantling asbestos cement (corrugated or semi corrugated) sheet in roof covering complete all as specified and as directed.
S&F 6mm thick asbestos cement, two piece adjustable plain angular ridge fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
S&F 6mm thick asbestos cement, corrugated sheet or semi-corrugated sheets fixed with L-type or J-type hook in roofs covering complete all as specified and as directed.
S&F 20 mm thick, second class hard wood boarding, clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc complete all as specified and directed.
S&F for false ceiling with exposed metal (PPGI) framework/ "Tee" grid providing and fixing of suspended Tee grid false ceiling using 'T" grid system - powder coated GI (PPGI) exposed grid false ceiling suspension system in grid size 600mmx600mm with main runner 32mm x 24mm x 0.3mm thick, cross tee 26mm x 24mm x 0.3mm thick and wall angle 24mm x 24mm x 0.40 mm thick using 4mm thick non asbestos fiber cement board of size 595mm x 595mm, and asbestos free fiber cement board manufacturer using high pressure system curing technology. T grid framing is suspended using 4mm GI/MS bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip, also providing provisions for light fixtures, air conditioning diffusers and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at not more than 300mm from the adjacent wall. 1220mm/600mm cross tee to be interlocked between main runners @ 600mm c/c, so as to form 600mm x 600mm or 1200mm x 600mm grid, confirming IS 14862 and type B category III of ISO 8336, tested as per AS 1530 Part-3 & B. S-476 Part 4, 5, 6, 7 & 8 should be placed in grid module to form after and including dismantling of existing false ceiling of any type complete all as specified and as directed.
S&F for second class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Taking down the chowkhats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed
Taking down the chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed
Taking down the shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed
Taking down the shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and as directed
Taking down shutters of any descrption not exceeding 1.00 Sqm each and refixing in the same opening complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and as directed
Resecuring or easing and adjusting without taking down the shutter of size exceeding 1 Sqm and not exceeding 2 Sqm complete all as specified and as directed.
S&F 35 mm thick, second class hard wood, glazed and skeleton shutters with open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a).
S&F 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded as in SSR Part I Section 8 clause 8.24 (b) complete all as specified and as directed..
S&F 35 mm thick, second class hardwood, plain, framed, panelled shutters (any number of panels), with lock rail and panels of 9mm BWR commercial Ply or 12mm thick veneered particle board medium density, with commercial face veneering on both faces. the size of rail and styles 150 & 100mm, kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed by Engr-in-Charge.
S&F for 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 75 mm size stainless steel, butt hinges, medium weight, cold rolled, complete all as specified and as directed.
S&F 150 mm long mild steel pressed handle, oval type, stove enameled black complete all as specified and as directed.
S&F in repairs 150 mm long mild steel pressed handle, oval type, stove enameled black complete all as specified and as directed.
S&F 200mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.
S&F as in repair 200mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.
S&F 150mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.
S&F 150 mm size aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.
S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F for mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and as directed.
M&L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.
S&F for mild steel small articles using flat iron of size 25x3mm thick such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290 (Gde E-165) complete all as specified and as directed.
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for embedding hold fast, bed block, cills, etc including necessary form work complete all as specified and as directed.
Taking up or down 15 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for reuse at same site or other site complete all as specified and as directed.
Taking up or down 20 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for reuse at same site or other site complete all as specified and as directed.
Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixtures fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.
Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixtures fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F in repairs PVC low level flushing cistern, 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed
S&F in repairs 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm - 210 gms ) complete all as specified and as directed.
S&F in repairs PVC water tank top cover suitable for 250 to 1000 Ltrs capacity complete all as specified and as directed.
S&F in repair plastic water closet seat, white/black, closed pattern with flat bottom, cover and mild steel chromium plated or alluminium hinging device complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.
S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor using concrete (1:2:4) type B0 and to match with existing specifications complete all as specified and as directed.
S&F in repairs, 32mm /40mm dia x 800mm waste pipe for sink/wash basin/ uninal hand basin etc complete all as specified and as directed.
S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelain stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed.
S&F in repairs 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs 15mm dia angular stop cock cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F in repairs 15mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.
S&F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed.
S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe complete all as specified and as directed.
S&F in repairs 15 mm bore, bib taps, PTMT, any colour, high pressure screwed for iron pipes or brass ferule and fixed (min weight 90 gms) complete all as specified and as directed.
S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs 20mm bore, gun metal gate valves with iron wheel head screwed both ends for iron pipes or for unions complete all as specified and as directed.
S&F in repairs 50mm bore, high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to wall, ceiling or in floors complete all as specified and as directed.
S&F in repair 100 mm bore, CI branch piece, single (equal or unequal) complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail, D type, 60cm long, 20mm dia with brackets complete all as specified and as directed.
M&L for preparation of new wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.
M&L for preparation of new plastered surface of walls etc and applying three coats of white wash on walls complete all as specified and directed
M&L for preparation of new plastered surface etc and applying three coats of white wash on ceiling complete all as specified and directed
M&L for preparing newly plastered surfaces of walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.
Disconnecting existing water tank of capacity not exceeding 500 litres, reconnecting and refixing in position including cleaning and removing all scale and dirt, etc from tank and from mouth of circulating pipes, washing the internal surfaces with bleaching powder etc and writing "cleaned on :-----(Date) with 2"height on outer face of tank with white paint complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed.
Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments.
M&L for bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and as directed.
Taking out/down old/unserviceable under ground LT cables of any size and connections including pipes etc from trenches/walls/poles of any cross sectional area and keeping serviceable materials in safe custody for reuse and unserviceable materials removing from site complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately.
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 6 Sqmm 2 core, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed.
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 10 Sqmm 2 core,, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed.
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, nominal cross sectional area of main conductor 10 Sqmm 4 core,, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed.
S&F in repairs 25 mm dia, rigid non metalic, PVC Conduits medium grade complete with all accessories suitable for wiring to street lights complete all as specified and as directed.
S&F for service cable, 1100 volts grade heavy duty cable with PVC insulated, stranded aluminium conductor served with an inner seathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed stranded conductor, nominal cross sectional area of 6 Sqmm 2 core complete all as specified and as directed.
S&F service cable,1100 volts grade heavy duty cable with PVC insulated, stranded aluminium conductor served with an inner seathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, stranded conductor, nominal cross sectional area of 4 Sqmm 3 core complete all as specified and as directed.
S&F single run service cable with PVC insulated, stranded copper conductor served with an inner seathing of FRLSH suitable for outdoor uses and PVC sheathed 3 core stranded conductor of 2.5 Sqmm nominal cross sectional area complete all as specified and as directed.
Taking down LED/CFL/sodium vapour/metal halide/MV lamp street light/flood light/ any other light fitting of any make and size, refixing the same in position after replacement of unserviceable/defective parts like fittings , lamps , LED driver etc as required to make the fittings in smooth serviceable condition and testing complete and as directed. Note : (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of worn out cables as per existing size and type of the fitting shall be deemed to be included in the unit quoted rate of this item. (iii) Necessary climbing arrangements like scaffolding for repairing/ removing/ refixing the fittings should be included in the quoted rate.
All as per item No. 112 here-in-above but for hanger lights/flood lights/ street lights.
All as per item No. 112 here-in-above but for aviation lights.
S&F in repairs lamp holder assembly as per existing garden light fitting with necessary modifying the electrical connections complete all as specified and as directed.
S&F for new LED street light fitting of capacity 120W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 90W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 70W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 60W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F for new LED street light fitting of capacity 48/50W, aerodynamically designed for all weather conditions with excellent thermal management, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection, 10 KV SPD included, Efficacy >110/120 LPW, including with necessary brackets /pipes/ clamps and nuts and bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. Note: (a) Warranty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor (b) Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items
S&F in repairs integral compact wide beam high performance 200W LED flood light luminaire with PLUTO NEO LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs integral compact wide beam high performance 100W LED flood light luminaire with ROVER PLUS LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs integral compact wide beam high performance 70W LED flood light luminaire with ROVER PLUS LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs integral compact wide beam high performance 50W LED flood light luminaire with ROVER LED, made up of pressure die cast aluminium housing with toughened glass high powered LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10 KV SPD including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed.
S&F in repairs modular junction box made of SMC/FRP of size 350x250x150mm with provision of MCB SP, and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel/ flat iron clamps, nuts and bolts complete all as specified and as directed.
S&F in repairs modular junction box made of SMC/FRP of size 240x130x110mm with provision of MCB SP, and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel/ flat iron clamps, nuts and bolts complete all as specified and as directed.
S&F in repairs, LED post top lantern of 40 Watt MAPLE Decorative post top for 360° indirect light with IP65 protection, resistant to impact and corrosion, glare free and better uniformity including providing and connection with 1.5Sqmm copper conductor, multistranded copper conductor cable of required length complete all as specified and as directed.
S&F in repairs decorative gate light 20W made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 Base, including providing and connection with 2.5 Sqmm aluminium conductor, cable of required length and taking down old unserviceable fitting of any make and size complete all as specified and as directed.
S&F LED 10W Bollard MAYA I Pressure die cast powder coated housing with PC diffuser, efficient high output LED with IP-65 protection complete all as specified and as directed.
S&F in repairs street light bracket arm of length not less than 1.5 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed.
S&F for batten holder with screw in existing post top lantern fitting by removing top post in place of pin type holder to suitable B22 base LED bulb complete all as specified and as directed.
S&F for LED post top 20watts cap HERITAGE rated, ideal to light up parks, gardens and heritage site with rated voltage 240 Volts including high voltage and short circuit protection IP 65, with necessary suitable fixing accessories/arrangements complete all as specified and as directed.
S&F for time switches digital type 415 Volt Three phase of 65 Amp rating with contactor fitted inside and MCB TPN 63 A, max load of 6 KW within steel enclosure complete including connecting items complete all as specified and as directed.
S&F in repairs power contactor 3 pole 65 Amps all as specified and directed
M&L for LT cable jointing kit straight through epoxy type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 35 sqmm including taking down complete all as specified and directed.
Supply only Integral LED aviation lights comprising of aluminium housing with polycarbonate enclosure complete all as specified and as directed.
S&F for time switches digital type 240v/ single phase of 32 Amp rating with contactor fitted inside and MCB SPN 40 A, max load of 12 KW within steel enclosure complete including connecting items complete all as specified and as directed.
M&L in repairs for cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pole coping including necessary form work for fair finish surfaces duly breaking the old damaged and placing a new flush box for termination inside the base complete all as specified and as directed. Note : Rate deemed to be included of CRCA sheet made out of sunken box with terminals.
Supply only LED lamp 10 Watt B22 base surge protection 2.5K,CCT 6500K complete all as specified and as directed.
Supply only LED lamp 14 Watt B22 base surge protection 2.5K,CCT 6500K complete all as specified and as directed.
Supply only LED lamp 20 Watt B22 base surge protection 2.5K ,CCT 6500K complete all as specified and as directed.
Supply only PVC insulation tape of pack of 30 rolls multi colour and black of standard size and thickness 2 to 3mm complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 20 to 45 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 60 to 120 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED Flood light fittings of capacity 50 to 150 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F for LED drivers suitable for any make and type of LED Flood light fittings of capacity 200 watt including taking down old unserviceable driver complete all as specified and as directed.
S&F Strem LED strip light 5W ,CCT value 3000K/6500K colour Red/Green/Blue IP-65, Outdoor type suitable for AC -120-300 V,50 Hz including taking down complete all as specified and directed.
M&L for scrapping the existing surfaces of the street light poles of height 7.5 metres (painting length) with emery paper, removing the dust and rust properly and applying 2 coats of aluminum paint over complete pole and stickering the pole with glow sign round the electrical pole at three places of 10cm width and numbering with paint not less than 4 letters with glow sign material at the bottom of pole and nomenclature shall be specified and as directed by Engineer-in-Charge.
M&L for drawing a circle and writing the number in side the circle on Electric pole not less than 4 letters and nomenclature and colour of the sticker to be stickered on pole shall be given by Engineer-in-Charge complete all as specified and as directed..
S&F in repairs 50 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, pole using suitable clamp/holder bat complete all as specified and as directed.
Taking down the service connections of the light fittings from connector/ ceiling roses/ overhead bare conductor etc of the street/ security lights , from height of approx 7mtr above ground by any means on PCC/ Metal poles with all safety measures to remove the carbon deposits/ disconnected due to wind/wear & tear complete and connecting / fixing back the connections /fittings at existing place complete all as specified and as directed
Dismantling steel poles/ struts, any size, transporting to store and stacking
M&L for steel tubular swaged pole 410 SP-22 (8.5 metre long) including CI base plate, finial taper plug, bolts, nuts & screws as per IS 2713 Part -I & II including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer on exposed portion and making strips of width 30 cm upto 1.5 m from the ground level in black and yellow shade in alternate layer including numbering of poles using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and two coats of anticorrosive paint over a coat of red oxide primer to embedded portion of pole including making good to match existing area complete all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts and nuts, checknuts and washers of galvanised iron or steel all as specified and shown in elecrical plate No. 3 of SSR Part-1 including necessary excavation and earth work in any type of soil, PCC 1:3:6 type C1, chamber with RCC 1:2:4 type B1, 40 mm thick cover with MS rod 80 mm dia 150 mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.
Comprehenssive maint of solar street light fitting such as lithium-ion battery, removal of rust, any minor repair will be carried out complete all as specified and directed.
Taking down carefully 15 meter long high mast light, removing all the serviceable fitting (6/9 Nos ) of 250/400 Watt for refixing after replacement of worn out and serviceable Rope 6/9 mm dia stainless steel , chain, gear, jubli clamp, etc. After servicing re-installation of the complete High Mast all as specified and directed by Engr-in -charge.
M&L for opening/ removing of burnt out winding and complete with new winding for 1HP motor for automatic operation of the high mast , after re-installaytion and testing all as specified and directed by Engr-in -charge.
Disconnecting LT street light UG cable from junction box, digging the cable to take out the loop after excavation, fresh & checking the cable and fix the lugs of suitable size and connect the cable with junction box and testing all as specified and directed by Engr-in -charge. Note: Excavation and earth work shall be deemed to quated rate.
M/S RK Trading
MAZUMDAR ENTERPRISE
NChetia and Sons Trading
FREEZCON
R.D.CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .