REPAIR AND RE-PAINTING OF CHARPOY GI AND MS SQUARE NCO/JCO, BED HARD OFFICER, CHAIR WRITING STEEL AND CHAIR COMPUTER REVOLVING AT VARIOUS LOCATIONS UNDER AOR BSO (SOUTH) UNDER GE(SOUTH) BANGALORE

Amount

Charpoy MS Square NCOs (FD/MAP II/01) Removing the existing unserviceable plywood from charpoy MS Square NCO's and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood charpoy MS Square etc complete all as specified and as directed. Note : New plywood incorporated will be measured and paid seperately under relevant item of this schedule.

Charpoy MS Square NCOs (FD/MAP II/01) Removing of existing unserviceable Rectangular MS Tube short rail and supply and fixing of 25mmx65mm of 16 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square NCOs (FD/MAP II/01) Removing of existing unserviceable Rectangular MS Tube long rail and supply and fixing of 25mmx65mm of 16 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square NCOs (FD/MAP II/01) Removing of existing unserviceable MS Square leg of 32mmx32mm and supply and fixing of 32mmx32mmx440mm of 16 Gauge MS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square NCOs (FD/MAP II/01) Removing of existing unserviceable MS Square Stiffener of 25mmx25mm and supply and fixing of 25mmx25mmx900mm of 16 Gauge MS Square stiffeners as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square JCOs (FD-CECZ/TD/726) Removing the existing plywood from charpoy MS Square JCO's and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the new plywood to the charpoy MS square etc complete all as specified and as directed. Note : New plywood incorporated will be measured and paid seperately under relevant item of this schedule.

Charpoy MS Square JCOs (FD-CECZ/TD/726) Removing of existing unserviceable Rectangular MS Tube short rail and supply and fixing of 25mmx65mm of 16 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square JCOs (FD-CECZ/TD/726) Removing of existing unserviceable Rectangular MS Tube long rail and supply and fixing of 25mmx65mm of 16 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square JCOs (FD-CECZ/TD/726) Removing of existing unserviceable MS Square Head Rest of 32mmx32mm and supply and fixing of 32mmx32mm of 16 Gauge MS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square JCOs (FD-CECZ/TD/726) Removing of existing unserviceable MS Square leg of 32mmx32mm and supply and fixing of 32mmx32mmx440mm of 16 Gauge MS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square JCOs (FD-CECZ/TD/726) Removing of existing unserviceable MS Square stiffeners of 25mmx25mm and supply and fixing of 25mmx25mmx900mm of 16 Gauge MS Square stiffeners as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Bed hard top MS square for Offrs (FD/E6/MAP/08 ®) Removing the existing plywood from charpoy MS square Offrs and preperation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces including refixing/fixing the plywood on charpoy MS Square etc complete all as specified and directed . Note : New plywood incorporated will be measured and paid seperately as supply only under relevant item of this schedule.

Charpoy MS Square for Offrs (FD/E6/MAP/08 ®) Removing of existing unserviceable Rectangular MS Tube short rail and supply and fixing of 25mmx65mmx900mm of 18 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square for offrs (FD/E6/MAP/08 ®) Removing of existing unserviceable Rectangular MS Tube long rail and supply and fixing of 25mmx65mmx2050mm of 18 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square Offrs (FD/E6/MAP/08 ®) Removing of existing unserviceable MS Square Head Rest of 38mmx38mm and supply and fixing of 38mmx38mm of width 900mm and height 800mm of 18 Gauge MS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Charpoy MS Square Offrs (FD/E6/MAP/08 ®) Removing of existing unserviceable MS Square Foot Rest of 38mmx38mm and supply and fixing of 38mmx38mm of width 900mm and height 800mm of 18 Gauge MS Square leg as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

(Applicable to Ser No 1, 06 and 12 )Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm x 12 mm and fix with headless MS nut & bolt 6 mm dia 75 mm length with washer all as specified/directed and as shown on drg. Note : The size of plywood all as specified/directed and as shown on drg is suitable to the items Nos 09, 10 & 11 for fixing only all as specified/directed and as shown on drg.

Charpoy GI Pipe with Plywood top (FD-220) Removing the existing unserviceable plywood from Charpoy GI pipe Plywood top S&F new plywood BWR Grade ISI marked of size 1980 mm x 900 mm rounded edges on four corner and fixed with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge Note : New plywood incorporated will be measured and paid seperately as supply only under relevant item of this schedule.

Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm x 12 mm and fix with headless MS nut & bolt 6 mm dia 75 mm length with washer all as specified/directed and as shown on drg.

Double Bunk Charpoy steel with ply (CWE/FD/04®): Removing the existing plywood from double bunk charpoy and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour black to all external and internal surfaces .

Double Bunk Charpoy steel with ply (CWE/FD/04®) Removing of existing unserviceable Rectangular MS Tube short rail and supply and fixing of 25mmx65mmx900mm of 18 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Double Bunk Charpoy steel with ply (CWE/FD/04®) Removing of existing unserviceable Rectangular MS Tube long rail and supply and fixing of 25mmx65mmx2050mm of 18 Gauge MS Rectangular Tube as per drawing duly painting the affected area with two coats of synthetic enamel paints over a coat of red oxide primer all as specified as per drawing and directed by Engr-in-Charge.

Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm x 12 mm and fix with headless MS nut & bolt 6 mm dia 75 mm length with washer all as specified/directed and as shown on drg.

Chair Verandah (FD/E6/MAP-II/06) Removing the existing unserviceable seat and back from chair verandah of size 455mm x 455mm and fixing of best quality PVC Seat and Back 4mm thick with weight not less than 1.85Kg and Grooves 90x10mm, 10Nos on the seat and Back as shown in drawing.

Material and labour for preparing old steel surfaces of frame of chair verandah with one coat of synthetic enamel paint white colour, as shown on drawing and all as specified/directed.

Supply and fix new hard rubber toes of appropriate size, suitable to chair verandah as shown on drawing and all as specified/directed.

Chair writing steel (Applicable to item Nos 27 to 31) (FD/E6/MAP/12) Removing the existing unserviceable damaged fabric from seat and back and supply and fix new fabric to seat and back and shall contain materials in various colours - acylic , polyester, polypropylene of approx size 950mmx500mm (for seat and back both) upholstered with pvc lipping all round.

Removing the existing unserviceable damaged foam including plywood and supply and fix new polyurethane foam of approx size 950mmx500mm (for seat and back both) shall be 50mm thick and shall be moulded with density 50-55 kgs per cum and hardness 20 +/- 2 kgs/m2 on hampden machine.

Removing the existing unserviceable damaged armrest and supply and fix new armrest made of black integral skin polyurethane with 75-85 hardness and reinforced with MS insert it shall be scratch and wheather resistant both hand rest sections to have slope towards front.

Material and labour for preparing the surfaces of old steel frame of the chair with one coat of synthetic enamel paint black shade (spray painting for better finish) for chair writing steel all as directed/specified and as shown on drg.

Removing the existing unserviceable damaged contoured lumber support and supply and fix new contoured lumber support for extra comfort.

Chair computer/Chair revolving (Applicable to item Nos 32 to 37) (FD/E6/MAP/01) Removing the existing un serviceable/damaged fabric of seat and supply and fix the new fabirc of seat 510mm x 470mm x 60mm with PVC lipping alround.(Note : Size of seat can vary to +- 100mm)

Chair computer/Chair revolving Removing the existing un serviceable/damaged fabric of back and supply and fix the new fabric of back of seat 620mm x 470mm x 60mm PVC lipping. (Note : Size of back can vary to +- 100mm)

Chair computer/Chair revolving Removing the existing un serviceable/damaged seat and supply and fix the new seat of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with fabric and moulded polyurethane foam.

Removing the existing un serviceable/damaged back and supply and fix the new back of seat 620mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping. (Note : Size of seat and back can vary to +- 100mm)

Removing the existing broken Pedestal assy (injection moulded in black 30% Glass filled nylone A 10.5 MM dia forged bright Zinc plated MS castor pin is of press fitted into each prong for holding the cators. It is 600 mm pitch-centre Dia) from revolving chairs & computer chairs ,supply and fix new Fibre Stem Base

Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed in a MS black powder coated outer central column tube 38 mm dia and 2mm thick. It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism. Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement)

Chair revolving with Arm high back (Applicable to item Nos 38 to 41) (TP) Removing the existing un serviceable seat (cushioned) and supply and fix the new seat of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with leatherette and moulded polyurethane foam for chair revolving padded with arm high back all as shown on drg and as directed.

Removing the existing un serviceable back (cushioned) and supply and fix the new back of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with leatherette and moulded polyurethane foam for chair revolving padded with arm high back all as shown on drg and as directed.(Note : Size of seat and back can vary to +- 100mm)

Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed in a MS black powder coated outer central column tube 38 mm dia and 2mm thick. It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism. Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement)

Removing the existing broken padded Arm rest (Black integral skin polyurethane finforced with leatherette and MS insert. It shall be scratch and weather reisistant) as per sample from revolving chairs & computer chairs ,supply and fix new arm rest .

Chair revolving with Arm Mesh back (Applicable to item Nos 42 to 46) (TP) Removing the existing un serviceable Mesh back with neck support and supply and fix the new Mesh back with neck support all as shown on drg and as directed.

Removing the existing un serviceable/damaged seat fabric including foam and supply and fix the new seat fabric including foam of seat 510mm x 470mm x 60mm (12 mm hot pressed ply wood, upholstered with fabric and moulded polyurethane foam)

Removing the existing broken bottom gas lift (Up & Down) hydraulic with pouch (Maintenance free environmental friendly, chrome free cylinder tube shll be fixed in a MS black powder coated outer central column tube 38 mm dia and 2mm thick. It shall have 100 mm stroke length and gas pressure of 300 newton force, should under go an impact test)from revolving chairs, computer chairs supply and fix new bottom gas lift (hydraulic) with pouch of Make : Godrej or equivelent Note : Adjustable Tilting Mechanism to be designed with the following mechanism. Forward tilt, self regulating tilt tension + manual override, 4 position tilt lock. Anti-shock back mechanism to prevent back rest from hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement)

Removing the existing broken twin caster wheel from revolving chairs and computer chairs etc ,supply and fix new fibre caster wheel Make : Godrej or equivalent

Removing the existing broken padded Arm rest (Black integral skin polyurethane finforced with MS insert. It shall be scratch and weather reisistant) as per sample from revolving chairs & computer chairs ,supply and fix new arm rest make : Godrej or equivalent

Global Furnisherts (BID ID -3309789)

REENA INDUSTRIES (BID ID -3307576)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3315855)

Vivek Engineers (BID ID -3307725)

Ms GHOSH AND SONS (BID ID -3312810)

Mavee Syndicate (BID ID -3307387)

SARGAM ENTERPRISES (BID ID -3313101)