Repair to door window ventilators rolling shutters collapsible gates and connected items in officer married accommodations MO Goa and other units under AGE BRI at GE Gomantak Vasco

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed

Taking down shutters of any description not exc. 1 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed

M&L for inspecting joinery and carrying out petty repairs, easing adjusting door/ window/ kitchen cupboard shutters, tightening screws,adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs exisitng mongery to make the system functional complete as directed. Note : (i) Each repair job shall be measured as one job.

S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 2nd class hard wood, plain framed, panelled shutters (any number of panels), 35 mm thick with panels of timber flat on both sides (feather edged), or of veneered particle Board medium density, wood particle board with commercial face veneers; fitted to chowkhats complete all as specified and directed.

M&L for 35 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on one face and other face covered with decorative face veneer with lipping/frame to match including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

M&L for 2nd class hard wood (Sal) glazed and skeleton shutters 35 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. with sash bars divided into squares with plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

M&L for 2nd class hard wood (Sal) glazed and skeleton shutters 30 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. with sash bars divided into squares with plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F Aluminium plate type II, gate and shutter hook and eye of size 125 mm complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed. Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item.

S&F 300 mm, brass ordinary rat tail rod pattern spring including roller and roller plate complete fixed to wooden/steel frame including necessary welding, cutting, opening etc. complete all as directed.

Cutting holes in brick walls/PCC block wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4, type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and directed.

Cutting holes in stone masonary wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4, type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F in repair for towel rail 600 mm long of PTMT (minimum weight 190 grm) fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed.

S&F in repair brass mortice lock 4 levers, vertical type, of size 100 mm including plate and two keys including making hole in pressed steel frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F solar/sun control film 50 micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

M&L for 3 mm thick sheet glass frosted and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed. Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item.

S&F aluminium anodised barrel tower bolt of extruded section 125 mm long and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F in repair 300 mm, brass ordinary rat tail rod pattern spring including roller and roller plate complete fixed to wooden/steel frame including necessary welding, cutting, opening etc. complete all as directed.

S&F Aluminium plate type II, gate and shutter hook and eye of size 150 mm complete all as specified and directed.

S&F in repair 18/19 mm thick veneered particle boards interior grade, solid core, general purposes type, with with decorative veneer on one face, fixed with screws to timber frame work complete all as specified and directed.

M&L for external teak wood lipping, 6 mm thick and 18/19 mm wide fixed with nails complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

S&F Ball catches (magnetic catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50 x 15 mm and fixed complete all as specified and directed.

S&F in repair plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads cross sectional area exc. 6 Sqcm but not exc. 13 Sqcm in second class hard wood complete all as specified and directed.

S&F in repair second class hard wood boarding 25 mm thick, planed both sides with butt joints fixed with nails in any situation complete all as specified and directed.

S&F in repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

M&L for forming jambs etc to opening, including cutting, toothing proper bonding into old work, also facing, jointing and pointing to match the existing work, new work built in CM 1:6 complete all as specified and directed.

S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: frame guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works confirming to Fe- 290.Gde-E-165 complete all as specified and directed .

S&F 100 mm long hasp & staple Aluminium anodised, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.

S&F aluminium powder coated (thickness or powder coating not less than 50 micron) frame and shutters for doors/ windows/ ventilators, sliding/ fixed/ openable type with one or more rebates including joining cleat for fixing complete with necessary fittings complete all as specified and directed.

Removing existing grills from window and refixing the same after carrying out repairs for windows to external/ internal side of buidling complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Dismantiling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified and directed.

S&F steel rolling shutters, with lath thickness of 1.25 mm without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, manual type complete all as specified and directed

M&L for preparation of old painted steel, surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for repair and servicing of rolling shutters and removing of worn out components wherever required such as hood covers, laths, ball bearings, helical wire springs, lock plates, bracket plate, shaft pipe and straightening of existing guide channels, gear boxes, laths, hood cover at required places including greasing and welding and refixing in the same opening for smooth functioning and making good the disturbed surfaces of walls to match with existing complete all as directed. NOTE: (i) Quoted rate is inclusive for replacement all minor spare parts as required and supply of major spare part such as MS Spring, ball bearings, laths, shaft pipe, gear set required for replacement will be measured and paid separately under relevant items.

Supply only MS spring for rolling shutter fo any size or any lenght

Supply only ball bearing for rolling shutter

Supply only gear set for rolling shutter

Supply only rolling shutter shaft assembly including all necessary fittings

Supply only mortise lock steel 6 lever chromium plated with double handles for single shutter to match with existing one Make : Godrej , Universal

Repairs to collapsible gates removal, replacement of worn out minor spare parts such as rivets, roller wheels, straightening of vertical channels and cleaning of rust including greasing for smooth functioning complete all as specified and as directed.

Repairs to alumunium doors shutters of any size by cleaning, greasing and easing for smooth functioning including replacement of unserviceable minor fittings for the following:- Note: Spare parts if required shall be measured and paid separately under respective items.

Repairs to alumunium window/ventilator shutters of any size by cleaning, greasing and easing for smooth functioning including replacement of unserviceable minor fittings for the following:- Note: Spare parts if required shall be measured and paid separately under respective items.

S&F collapsable steel gate, top hung consisting for channel pickets, pivoted flats bars, top and bottom runners and wheel, handle etc as specification, erected in position and securing runners with holdfast and brackets complete all as specified in clause No. 10.24 of SSR part-I and consisting of following:- MS channel - Hot rolled medium channel 18 x 9 x 3 mm Tee and flats for top and bottom runners with a minimum web of 40 x 12 mm and flange of 40 x 6 mm Distance between centre to centre of channel pickets - 10 cm

Supply only rubber beading suitable for fixing glass in alumunium /MS Windows and Doors complete all as specified and directed.

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings.

S&F Deco-104 (10 mm thick), aluminium powder coated grill and fixed to the existing window frame with and incl 'C/F/L' channel (weight not less than 0.136 g/Rm) alround grill, CP brass/ stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles wherever required and fixing approved anodised aluminium standard section (C/F/H) around the opening all complete all as specified and directed.

Supply only roller bearing/ wheels and similar articles for sliding windows complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed.

S&F in repair 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed to timber frame work with screws or aluminium sections complete all as specified and directed.

Dismantling fencing wire mesh of any type complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation of post holes, filling & mass concrete or in coping complete all as specified and directed.

M&L for mild steel work as in posts and struts in fencing or gates, flat iron fillets, angle iron, swan neck including cutting tops to shape, drilling holes, notching for wire etc. conforming to Fe-290 Gde E-165 complete all as specified and directed.

Excavating in post holes(or similar holes) each n.exc 0.5 cum in soft/disintegrated rock, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed.

S&F rolled mild steel in plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde- E-250 quality A complete all as specified and directed.

S&F mild steel screw bolts (machine made) dia of shank 11 to 15 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with 3 mm thick MS washers and one hexagonal nuts, length of bolt exc. 5 cm and not exc. 10 cm long complete all as specified and directed.

S&F PVC coated chain link fencing MS galvanised, min size 75 x 75 mm mess or cases with 3.5 mm dia mild steel galvanised wire lapped straightning and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F mild steel work in tubular trusses/frame work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240 complete all as specified and directed.

S&F mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gussets plates, riveting, etc. n exc 10 Kg each brackets, conforming to Fe-290. Gde-E-165 complete all as specified and directed .

S&F in repair MS wheel of 200 mm dia, 80 mm thickness, 15 x 15 mm flange with bearing of 75 mm dia, 25 mm pin one end head other end nut bolt with washer with central groove for running in guide rail incl necessary angle iron brackets, welded to bottom of sliding door complete all as specified and directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickess including Nainital or similar pattern roofs covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge, hip and vally gutters, fixed with self tapping screws as specified complete all as specified and directed.

S&F in repair MS wheel (pulley type) w/o ball bearing of size 75 mm dia and 75 mm width for top rail of the sliding door rail

incl necessary brackets, fixed to top of sliding door complete all as specified and directed

Taking down existing roof treatment of any type with PCC padding/ plaster, cleaning of roof top by brooming down with steel wire brush, scrapping down with steel scrapper and roughening surfaces of old roof and washing down with water to remove dust etc. complete all as directed. NOTE:- Debries shall be removed outside Defence land without any extra cost to the Govt. complete all as directed.

Roughening surface of old concrete flooring by picking, sweeping clean and washing down with water to remove dust and applying neat cement slurry with 3 kg of cement per square metre and finally rendering/screeding 15 mm thick on roof slab in cement mortar 1:4 mixed with liquid WPC @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately

Supply only liquid water proofing compound

Providing and applying Sika Shield W-159( Formarly Known as Sika BIT w15), of make Sika or equivalent in FOSROC/ Dr Fixit, 1.5 mm thick double sided, modified bitumen waterproofing membrane with cross laminated PE film for wet application on the RCC structure . The membrane shall be applied after making concrete wall/roof in saturated surface dry condition and applying a bonding slurry Sika Shield W-1( formarly known as Sika BIT w1) or equivalent in FOSROC/ Dr Fixit. The membrane is then unrolled and pressed into the fresh slurry after removal of the release liner. Both long and short edges of the membrane are overlapped by min. 80 mm and firmly pressed together using a roller with staggered overalps. The membrane shall have tensile strength 4 N/mm according to ASTM D412 mod; elongation 200 % according to ASTM D412 mod; resistance to tear 23 N according to ASTM D624; joint peel resistance 700 N/m according to ASTM D1876 at 23 °C; joint shear resistance 220 N according to ASTM E154 ; low temperature flexibility of -15 °C over crack tested for 100 cycles according to ASTM C836 ; resistance to lateral water migration 70 m according to ASTM D5385 mod. application with authorised applicator only all as specified and directed

S&F 1 mm thick PVC sheet, plain colour fixed to existing doors by using rubber base adhesive inclu

ding removing and re fixing builders hardware complete all as specified and directed.

M&L for filling the existing cracks on plastered surfaces of walls by using Dr. Fixit Crack-X Shrink free compound or equivalent incl preparation of surfaces before application by opening the cracks and cleaning off the dust, dirt etc. for ease of application of paste all as per manufacturer's instructions and making good surfaces all as directed.

S&F in repair curtain rod fancy type, made out of 25mm dia MS conduit pipe duly PVC sleeved, fancy type plastic finial, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50 mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed.

M&L for anti termite treatment at contact of wood work by chemical emulsion (in oil or Kerosene based solution) @ 0.50 ltr per hole by drilling 6mm dia hole at down ward angle of 45 degree at 150mm centre to centre and sealing the same to match the existing surface complete all as directed.

M&L for applying Dr. fixit Prime seal diluted with water in 2:1 ratio and allowed to dry and applying three coats of Dr. Fixit Raincoat without dilution with water including preparation and cleaning of surface for ease of application complete all as per manufacturer’s instructions complete all as specified and directed.

S&F 0.80 mm thick mild steel plain, black sheet covering to door shutters/frames cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with rivetted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L post construction anti termite treatment for treating the soil under existing floors using emulsion @ 1 ltr per hole, 300 mm apart including drilling and plugging 12mm dia hole with cement mortar (1:2) to match the existing floor compete all as specified and directed.

M&L for 18 mm thick (+/- 5%), 100 % lead free, plain PVC solid sheet of minimum density 0.55 fixed as in kitchen cabinet including shutters and necessary fixing arrangement such as brackets, screws as required and all the edges shall be covered with 1 mm thick edge beading tape or 90 degree edge bent finish as per manufacturer’s instructions with fixing of necessary SS mongery complete all as specified and directed.

S&F 1 mm thick, decorative PVC laminate of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instructions complete all as specified and directed.

M&L for post construction anti termite treatment along the exterior wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear metre including drilling and pluging hole etc in apron.