Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-AOC VILLAGE MANDRI P O CHALAHAL SUB TEHSIL DHAMI DISTT SHIMLA SHIMLA HIMACHAL PRADESH | L1 | Accepted-AOC Awarded | |
| 2 | L2₹27.4 L+₹2.6 L (10.4%)Rejected-Finance HIMACHAL PRADESH HP | L2 | Rejected-Finance 2nd Lowest | |
| 3 | L3₹29.9 L+₹5.0 L (20.2%)Rejected-Finance | L3 | Rejected-Finance 3rd Lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical Non-Responsive | |
| 5 | Rejected-Technical WARD NO 10 DEVINAGAR PAONTA SAHIB DISTRICT SIRMOUR H P | - | Rejected-Technical Non-Responsive |
Tender Value
₹24.2 L
EMD Value
₹44,000
Closing Date
26 Feb 2020, 5:00 pmClosed
EE Dhami
Shimla Rural Division HPPWD Dhami
SH Construction of Boundary wall
2020_PWD_35285_1
PW-SRDD-CB-CTR- 2019-20- 19185 DT 29.1.2020
Open Tender
Civil Works - Buildings
Item Rate
90 days
Dhami
Please refer Tender documents.
12 documents required · 12 mandatory
₹500
EE Dhami
₹44,000
22 Feb 2021
19 Feb 2020
27 Feb 2020
19 Feb 2020
26 Feb 2020
19 Feb 2020
Amount
Surfacing dressingof the ground including removing vegetation inequalities not exceeding 15 centimetre deep and disposal of rubbish,lead upto 50 metres(Fifty metres) and lift upto 1.50 metres (one point five zero) in all kind of soil and directed by the Engineer -in-Charge at site.
Earthwork in excavation by Mechanical means (by Hydraulic excavator)/Manual means over areas (exceeding 30 cm in depth,1.50 metres in width as well as 10 square metre on plan) including disposal of excavated earth,lead upto 50 metres and lift upto 1.50 metres,disposal earth to be levelled and neatly dressed. All kind of soil and as per the direction of Engineer-In- Charge at site.
Earthwork in excavation by Mechanical means (by Hydraulic excavator)/Manual means in foundation trenches or drains (not exceeding 1.50 metres in width or 10 square metre on plan) and disposal of surplus excavated soil as directed,within a lead upto 50 metres including dressing of sides and ramming of bottoms,and lift upto 1.50 metres,including getting out the excavated soil and disposal of surplus excavated soil as directed, with a lead of 50 metres. All kind of soil and as per the direction of Engineer-In- Charge at site.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level 1:5:10 (One cement : five coarse sand : ten graded stone aggregate 40 mm (Forty millimeter) nominal size) mechanical mixed and vibrated including curing complete and all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:-
Brick work with common burnt clay F.P.S. (non modular) beicks of class designation 7.50 cm in super structure above plinth level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 sand) complete and all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:--
Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pilasters, columns,piers,abutments,pillars, posts,struts,butteresses, string or lacing courses,parapets, coping to floor five level,excluding the cost of centering, shuttering finishing 1:2:4 (one cement isto two coarse sand: 4 graded stone aggregate 20mm nominal size) complete and all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:-
20 mm cement plaster of mix 1:4 (one cement isto fine sand) complete and all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:.
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using strutural steel etc. as required in gratings frames guard, bar,ladder,raillings brackets,gates and similar works complete and all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:-
Providing and fixing of retro-reflective regulatory sign board of size 900 mm dia metre made out of 2 mm thick aluminium sheet,face to be fully covered with high intensity encapsulated lens type retro-reflectiveiron sheeting as approved by engineerin Charge. Letter symbols, borders etc. will be as per IRC-67 with required colour scheme on the boards and with high intensity grade A. the aluminium sheeting to be revected To MS frame of angle iron of size 40mm x40 mm x 4 mm (forty milimetre into forty milimetre into four milimetre) the boards wil be fixed to I no 50x50mm square post made of MS angle 50x50x4 mm( fifty milimetres into fifty milimetres into four milimetres ) 4.00 metre long welded to the frame with adequate antitheft arrangement, sheet work to be painted with two or more coats of synthetic enamel paint over and under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects asper the direction of Engineer in charge.
CONDITION:- All materials will be arranged him self by the contractor and bills will be submitted
Mukesh Kumar
Manish Mohan Sharma
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .