PROVISION OF UPVC SLIDING WINDOWS, FALSE CEILING AND RENOVATION OF ROOF TOP SHED ON ADMIN BLDG P 15 DHQ 3 NEW MANGALORE UNDER GE(I)(CG) GOA

Amount

SCH A PART- I [ B/R ITEMS] Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete article complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling framed trusses of span exceeding 10m but not exc 15m complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L Reinforced cement concrete design mix M30 (using 20mm graded stone aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S & F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

S & F TMT steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M & L Providing Cement Concrete ,Type B1, 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L Pre-cast cement concrete block masonry with solid blocks Type C1, 1:3:6 (using 20mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in cement mortar 1:4, complete all as specified and directed.

M & L Rendering 15mm thick in Cement mortar 1:6 on fair faces of internal brickwork or concrete surface and finished even and smooth without using extra cement, with and including 3mm thick wall care putty complete all as specified and directed.

M & L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work on internal wall and ceiling surfaces, complete all as specified and directed.

Complete removal of existing treatment on walls and M & L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on internal wall surfaces, complete all as specified and directed.

M & L Plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in padding concrete, complete all as specified and directed.

M & L Vitrified Ceramic tiles, double charged, 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, with and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M & L Coloured Glazed ceramic tiles in vertical surface 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick cement mortar 1:4 complete all as specified and directed.

S & F Factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116mm x 45 mm & sash 46mm x 82mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 Sqm upto 5.00 Sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed Note:- 1. Glass or wiremesh shall be paid separately. 2. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 3. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S & F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sq. m in each pane with and including solar control film 50micron thick, reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise, superficial area Exc 100 Sq cm but n exc 250 Sq cm complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.

S & F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M & L Two coats of Synthetic enamel paint over a coat of zinc chrome red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed.

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S & F Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

SCH A PART - II [ E/M ITEMS] M & L Point wiring complete with 1.5 Sqmm single core PVC insulted FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including cover plate and metal flush box as suitable module and including suitable size PVC rigid non metallic PVC conduit with all accessories and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete all as specified and directed

(a) One light/fan point controlled by one, one way switch complete all as specified and directed

(b) One switch socket outlet 5 A on same board with other switch complete all as specified and directed

(c) One switch socket outlet 5 A independent with cable 1.5 Sqmm complete all as specified and directed

All as per item No. 32.00 described here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board complete all as specified and directed

M & L Sub main wiring with two runs of 4 Sqmm and one run of 4 Sqmm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories concealed in walls complete all as specified and directed. (NOTE:- Two runs of 4 Sqmm + one run of 4 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length).

All as per item No. 33.00 described here-in-before but with 6 Sqmm sub main complete all as specified and directed.

S & F Switch Modular 6A one way, 1 module complete all as specified and directed.

S & F Switch Modular 16A one way, 1 module complete all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

M & L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed.

S & F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S & F Modular DBOXx MCB Protected 3 pin modular 16 Amp socket PVC plastic base white in colourwith MCB SP 20 Amp, 'C' curve, 10kA, 240 V complete all as specified and directed.

S & F Wall mounted fan of sweep 400mm AC single Phase. 230V, white colour complete all as specified and directed.

M & L MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with 200 Amps rated bus bar and neutral etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and directed.

M & L MCB TPN 100 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unserviceable MCB complete all as specified and directed.

M & L MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unsv MCB complete all as specified and directed.

M & L MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series including taking down old unsv MCB complete all as specified and directed.

S & F Industrial turbo ventilator / roof extractor exhaust fan for roof ventilators, 24 inch stainlless steel, weather and rain proof complete all as specified and directed.

S & F Neon LED outdoor / indoor strip light, 220 V AC having IP 65 protection complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32 × 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Gates Infra Construction Co

KOTIAN -ECC

M/s Royalance Corporation

NADAVAS GROUP