Repairing and Renovation of office chamber of Honble Minister Power Tourism Cultural Affairs Sports and Youth Welfare Deptt at 4th Floor Block D Janata Bhawan Dispur

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987 Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws,all complete as per direction of Engineer-in-charge

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity-coloured

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes

20 mm nominal dia Pipes

Providing fittingg and fixing of wooden flooring (Noble Laminated flooring BVG) with under layer of 6mm materials & installation including labour, carriage etc. as directed and specified.

Supplying ,fitting and fixing Johnson Zebra Roller Blinds Combi Blackout) make and shade, design as per choice complete as specified and directed by the Deptt. At all levels

Providing fitting ,fixing PVC Panels for wall and ceiling (Plain) with materials & installation including labour , carriage etc. as directed and specified.

Providing & fixing Office Table made out of 19mm/ 12mm Greenply & laminated with 1mnm thick mica outside and all inside surfqace finished with ).8mm thick laminate (S band) complete with necessary hardware fittings as per design as directed and specified by the Deptt.

Providng, fitting and fixing Decorative Showcase made of green ply board, Vinear, sunmica fitted with Brass fitting, complete in all respect as specified and directed by the Department

Providing fitting fixing Carpet for floor with material & installation including labour carriage etc. as directed and specified.

Supplying fitting and fixing Toughned glass partition with sliding arrangement with SS steel frame upto a ht. 2.10m made of 12mm thick tinted glass with all accessories etec. Complete and as directed.

Providing, fitting and fixing Cup board of Size 1.52 x 2.77 x0.6 made of green ply board , sunmica frosted Glass fitted with fitting , complete in all respect as specified and directed by the Deptt.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outle

Bell push

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supply, Installation ,Testing and commissioning of 12mmmm sweep BEE 5star rated, ceiling fan with Brush less directe cuttent (BLDC) Motor, classs of insulation B,3 nos. blades, 30cm long ldown rod, 2 nos. canopies shackle kit safety rope, copper winding, Power Factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350RPM (torelence as per IS :374-2019) THD less sthan 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut, bolts, washer temperatur rise=75 degree C (max) insulation resistance more tehan 2 mega ohm. suitable for 230V, 50Hz single phase AC supply earthing complete as required.

Supplying with installation testing and commissioning of Hi-wall 3 Star rating not ducted split type air conditioner of the following capacity with cordless remot compleete with copper pipe and electrical connection cable as approved by the Deptt. Up to 5m between the room unit and outdoor unit as directed by the Deptt. (Voltas/Carrier/VERTEX/Daikin make ) 2 Ton capacity

Supplying fitting and fixing Voltage Sstabilizer of the following specification complete including making necnessary connection as approved specified and directed by the Deptt. (SKYLAND/Vee-Dee/V Guard/ VERTEX/ VENUS MAKE ) 5 kva

Supplying with installation testing and commissioning of Hi-wall 3 Star rating not ducted split type air conditioner of the following capacity with cordless remot compleete with copper pipe and electrical connection cable as approved by the Deptt. Up to 5m between the room unit and outdoor unit as directed by the Deptt. (Voltas/Carrier/VERTEX/Daikin make )

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved specified and directed by the Deptt. (SKYLAND/Vee-Dee/V GUARD/VERTEX/INDO/VENUS make)

Supplying including fitting fixing of following A.C. wall fan in the existing hole on the wall of lfollowing sweeps with making necessary connection as approved by the Depp. As required complete and as directed y the Deptt.

Supplying insstallation, testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries of model No.DN296B LED155-6500PSU WH HSN Code 9405 complete with all accessories such as ballast, strter etc. in the false ceiling type Armstrong/Gypsum or similar ceiling mounting with necessary supprot with 1.5 sq.mm P.V.C. insulatled S.C. copper conductor as required and as directed by the Deptt. (Phillips/ Jaquar/LT/Wipro make)

Supplying installation , testing and commission of the follwing indoor Decorative Reccess mounted LED down lighter luminaries of model No.RC380B LED305 6500GS L60W60 PSD OD completed with all accossories such as ballast, strter etc. in the false ceiling type Armstrong/Gypsum or similar ceiling mounting with necessary supprot with 1.5 sq.mm P.V.C. insulatled S.C. copper conductor as required and as directed by the Deptt. (Phillips/ Jaquar/LT/Wipro make) 2x2 LED Recessed down light 30W

m/s chandan gogoi