e-Proc/ERW_30072024/ PD_IIEST/592

Amount

Supplying and fixing of 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required

Supplying and fixing 5 A to 32 A rating, Single pole , 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and 100 A, 16 KA,TPMCCB pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 95 sq. mm (45mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

Supplying and making end termination with brass compression gland and aluminium lugs for 2 X 10 sq. mm (19mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable Upto 35 sq. mm of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

Laying of one number PVC insulated and PVC sheathed / XLPE power cable Upto 35 sq. mm of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required

Supply only 1.1 kv grade XLPE Aluminium Armoured Cable of 2 core 10 sq mm(Make- Poly Cab/ Gloster)

Supplying, installation, testing & commissioning of Feeder Pillar Box made out of 2.0 mm thick CRCA MS sheet Compartmentalized of size 125cm x 75 cm x 51 cm depth suitable for 4 way VTPN installation inside the Feeder Pillar.Non draw out type, single front and free standing, dgree of protection IP55, Cable entry will be from bottom, gland plate-3.0 mm thick MS Ssheet, Powder coated paint inside and out side-Siemens Grey RAL-7032.

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of rectangular muffing above ground level around the Fidder Pillar Box base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the 250 x 250 x 100mm sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables for 4 core upto 16 sqmm.

Finishing the end of 4 core 10 sqmm cable XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

Supply only 1.1 kv grade XLPE Al Ar Cable of 4 core 10 sq mm. (Make:- Polycab, Glowster, KEI or equivalent)

Supply and fixing of 200 watt LED flood on the pole top of swimming pool with pressure die cast housing and toughened glass and high power LED's and secondary lenses with IP66 protection,10KV SPD included and Effiency > 110/120/135 LPW. Croptron makes of Cat No- TFS-507-200-57-NL-SL-GL-NSG or equivelent.

Supply and fixing of 120 watt LED flood on the Wall of swimming pool with pressure die cast housing and toughened glass and high power LED's and secondary lenses with IP66 protection,10KV SPD included and Effiency > 110/120/135 LPW. Croptron makes of Cat No- TFS-504-120-57-60D-HL2-GL-NSG or equivelent.

Supply and fixing of 25 watt LED flood on the Wall of swimming pool with pressure die cast housing air vent technology IP66 protection, also has an inbuilt surge protection. Croptron makes of Cat No- TRP-415-25-57-SL-LM-NBK or equivelent.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required with 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supply and fixing of 225 mm sweep Hi-Speed Exhaust Fan Orient Make by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. Length.

Supply and fixing of 450 mm sweep Heavy Duty Exhaust Fan 1400 RPM Orient Make by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. Length

DAS ENTERPRISE

H S ENTERPRISE

M. J. ENTERPRISE

M/S Sunny Enterprise