Renovation of Main Building and Other Work in Residence No. E-3 at Mayers Road, Ranchi

Amount

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantlingtile work in floors and roofs laid in cement mortar including stacking material with in 50 metres lead for thickness of tiles 10mm to 25mm including all complete job as per direction of E/I.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and coceletial windows openings, including wedge over all clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Providing and fixing panic bar / latch (Double point) fitted with a singlebody, Trim Latch & Lock on back side of the Panic Latch of reputed brandand manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing achromium plated brass 100mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary sscrews etc.complete.

Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area withperforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, withll 4 side tapered and backed by acoustical tissue withNRC value not less than 0.60

Providing and laying polished vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete. Glazed vitrifieid tiles Matt/Antiskid finish (size 600x600mm)

Providing and laying rectified glazed ceramic floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in all colours shade except such as white,Ivory,Grey,Fume,Red Brown,laid on 20mm thick cement mortar 1:4(1cement:4 coarsesand) jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete. Glazed vitrified floor tiles polished finish of (size 600x1200mm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 of (Thickness to be specifed by the manufacturer) of approved make in all colours shades except burgundy,bottle green,black of any size as approved by Engineer-in-charge in skirting,risers of steps and dados over 12mm thick bed of c ement mortar 1:3(1cement:3COARSE SAND) AND JOINTING WITH GREY CEMENT SLURRY @ 3.3KG PER SQM INCLUDING POINTING IN WHITE KCEMENT MIXED WITH PIGMENT OF MATCHING SHADE COMPLETE. job as per direction of E/I

Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facials and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels.Granite stone slab of colour black,cherry /Ruby red area of slab upto 0.50sqmm

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing and fixing factory made Upvc glazed /wire mesh windows/vdors comprising of lead free uPVC multi-chambered fame and mulion(where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I

Three track thre panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile,nylon rollers with SS 304 body using R2 series withframe (70mm & above)(40mm&above)& both glazed and fly scen sash(25mm&above)x(50mm & above) with zinc ally (zamak) powder coated touch locks with hook(height upto 1.2metre)

Providing & fixing glass panes with putty and glazing clips in steel doors,windows,clerestory windows all complete with: 5.50mm thick glass panes.

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat square bar as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials is not supplied by the deptt)

Providing one coat of synthetic enamel paint of approved shade and make over old wooden surface including preparing the surface after cleaning removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

covering of treated surface with P.C,C .Providng 50mm thick cemet concrete M20(1:1.5:3)maintaining slope in alternate 2mtx2mt panels with approved quality of stone chips of 20mm to 6mm sizie graded and cleaned sand of F.M 2.5 to3 includig screening,shuttering and mixingcement concrete in mixer with admixture of integral water proofing and placing in position,striking curing,taxes and royalty all complete as per buidings specification and direction of E/I.panels that has been left should be casted next day.there should be 6mm gap between panels Brand sika plastocrate plus,MYK proof WP 10,,Fosroc-conplastx4211C,Dr.Fixit pidiproof LW+or equivalent.

waterproofing for old land new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials applied with brush,roller or spray for water proofing coating as per manufacturer specification with foollwing steps:-

a)surface prepaation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all materials,labour,tools complete ponding test to be done after plugging all outlets and to be checked from soffit to indentify seepage,leakage.On indentification of seepage,cement grouting to be done with non shrink expanding admixture of sika India Pvt.Ltd/MYK schomberg/Dr.Fixit/Fosroc or equivalent.Providing and reparing of all conners and joints such as those between the parapet wall and the roof slab etc.shall be chamfered with 150mmx150mm fillet of mortar cement sand 1:4) admixed with acrylic polymer of sika/Fosroc/MYK schomberg/Dr.Fixit or equivalent.Before chamfering a prime coat shall be given with the using of arcylic polymer Reparing surface irregularities,damaged concretein base slab,dead cracks if any,with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement shurry including all materials,labour tools commplete.

(b)Ist coat-Applying Ist coat of two component acrylic modified ready to use flexible cementitious mataerials on surface saturated dry roof and in side wall of parapet wall upto 600mm by brush or roller after Ist coat of application 45 grm of Fibre glass cloth to lay when the first layer is still green,Ist coat should be applied @ 1.5kg/sqmt/coat.For the purpose of measurement the entire treated surface will be measured.-

(C) 2nd coat to apply the 2nd coat of two compounent anylic modified ready use Flexible cementitious materials right angle to the Ist coat over the glass fibre laid surface,2nd coat should be applied @ 0.7kg/sqmt/coat .For the purpose of measurement the entire treated surface will be measured.After three days of drying the 2nd coat,The rain water outlets to be plugged and ponding test to be done for 48 hours to indentity seepage,leakage from soffit and if found necessary rectification to be deon as per satisfaction of E/C.The waterproof coating to be protected from damage before screed over it.Water proofing coating to be protected from damgae before screen over it.Water proofing Brand sika Topseal 109hi/Fosroc Brushbod RFX/Dr fixit pidiffin 2K/MYK Aquafin TG.Product performance chemical,Base part A,Acrylic copolymer,PartB-specially graded cementtitious powder Density 1.6 kg/1(,mixed density) at + 27°C-Tensile strength-2N/mm2 after 28 days(with Fibre cloth)(According to ASTM D 2370)Pullout Bond strength-2N/mm2(concrete failure)(According to ISO 4624)Slant shear Bond strength-4N/mm2(According toFIP 5.15) Elongation at Break-35# without Fibre cloth and 20% with Fibre cloth(According to ASTMD 2370)

(d)Protection of treapled surface with PCC-The treated surfaace should be covred with 25mm /50mm PCC of M-20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlets in allernatepenels of 2mtx2mt keeping 6mm gap between the panel joint Integral water proofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete (paid separately for this items) All corners shall be chamfered with 150mm fillet.The rainwater outlets shall be just leveled with screed concrete to ensure smooth discharge of water-The peripheral gaps between Pvc pipe outlet and concerte surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika India pvvt.Ltd/MYK.schomberg/Dr.Fixit/Fosroc.For the pupose of measurment the entire treated surface will be measured;

(e) Groove of PCC surface should be filled with polysulphide sealant(paid separately)Brand-sika India Pvt Ltd/MYK schomberg/Dr.Fixit/Fosroc warrantly for five years.

Providing and fixing stanless steel(Grade 304) railing made of Hollow tubes,channells,plates etcincluding welding,grinding,buffing,polishing and making curvature( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,I/C fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc,of required sizie,onthe top of the floor or the side of waist slab with suitable arrangment as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoreis such as nuts,bolts,fastners etc)

Providing and laying matt finished vitrified tile of size 300x300x9.8mm havingwith water absorption less than 0.5% and conforming to IS: 15622 of approvedmake in all colours and shades in for outdoor floors such as footpath, courtyard, multi modals location etc., laid on 20mm thick base of cement mortar1:4 (1cement : 4 coarse sand) in all shapes & patterns including groutingthe joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

steel work welded in built up sections/framed work,including cutting hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings,frames,guard bar,ladder,railings,brackets ,gatesa and similar works.

Filling the gap in between aluminium frame &adjacentR.C.C/Brick/stone work by providing weataher sillcon sealantover backer rod of approved quality as per architectural drawings and direction of E/I.Upto 5mm depth and 5mm width.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

local sand lead 3K.M

Brick lead 8K.M(1K+7P)

chips lead 22K.M.

Providing and fixing C.P Brass 32mm size Bottle Trap of s approved quality & make and as per direction of E/I..

Providing and fixing lead connection pipe with heavy quality brass coupling 2 Nos. at both ends etc. all complete as per specification and direction of E/l .

( 2) 15 mm dia and 45 cm long

S/F/F VIP Bath room fitting including all complete job as per direction of E/I.

pillar cock long neck

Bib cock (Long tahread)

Bib cock(2way)

Concealed stop cock heavy duty

wall mixer with provision for over head shower with elbow coupling and wall flange

Sink mixer withswinging casted spout

Towel Rail 24"

soap dish

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

75mm dia

110mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Couplar 75mm dia

Coupler 110mm dia

Single pushfit coupler 75mm dia

Single pushfit coupler 110mm dia

Single Tee with door

Single Tee with out door

75mm dia

shoe(plain)

75mm dia

110mm dia

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4(1cement:4 coarse sand) and making good the wall etc.complete.

75mm dia

110mm dia

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Exposed on wall)

25mm nominal outer dia pipes

32mm nominal outer dia pipes

40mm nominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

20mm dianominal outer dia pipes

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

group C

Twin control point wiring in PVC conduit withModular type switch-wiring for Twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way Moodular type switch,Modular plate,suitable size etc as required.

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Wiring for circuit/submain wiring along with earth wiring with the following sizes FR PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

2x4sqmm+1x4sqmm earth wire

Supplying anf dixing of following sizie of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of PVC/G.I box on surface/recess withsuitable size kof phenolic laminated sheet cover in front including painting etc .as required.

75mmx75mmx50mm deep(4"x4")

72mmx146mmx48mm depp/(4"x7")

170mmx221mmx48mm deep(8"x10")

210mmx206mmx48mm deep/(10"x12")

S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required.

sUPPLYING AND FIXING MODULAR BLAMKING PLATE ON THE EXISTING MODULAR PLATAE & SWITCH BOX EXCLUDING MODULAR PLATE AS REQUIRED.

S/F Modular boxes,base &cover plate: Supplying and fixing following size/Modules G.I.Box along with modular base & cover plate for modular switches in recess etc as required.

1 OR 2 MOODULE (78MMX78MMX45MM)

4/5 MODULE(78MMX140MMX50MM)

S/F Suitable size G.I.Box with moudular plate and cover in in front on surface of a recesses including providing and fixing 3pin 5/6 Amp Modular socket outlet and 5/6 amp.Modular switch connection as painting etc. as req. (for light plugs to be used in non residential building)

S/F Suitable with modular plac and cover in front G.I.Box on surface/Recess with suitable size or in recess including providing and fixing 6 pin 15/16 Amp socket outlet and 15/16 amp.,modular switch connection as painting etc. as req.(for light plugs tobe used in non residental building)

S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

S/F Brass batton / Angle Holder including connection etc as reqd

I.T.C.of exhaust Fan up to 450mm sweep in the existing 0pening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as reqd.

S/F of 6Amp to 32amp amprating 240 volt 10KA including all complete job as per direction of E/I.

6/32Amp single polle

50/63 amps TPN

40 amps,DP

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

12 W LED Square Down light t

Supply Installation,testing and commissioning of follwing size ceiling fan 3 Bleades confirming to IS:374:2019 including wiring the down rods of standard length(upto 30cm) with 1.5 sqmm FR PVC insulated ,copper wire suitable for 230V 50Hz,single phase supply etc.complete as required.

1200mm(48")BI DC 5 star rating 32W ceiling Fan

Supply of 4 pole MCCB 25/100amp,16KA with fixed thermal magnetic seting including all complete job as per direction of E/I.

Supply of 8 way(8+24),TPN,vertical type MCB DB,double door including all complete job as per direction of E/I.

Supply of 63amp,415V,Heavy duty three phase with neutral Busbar chambr including all complete job as per direction of E/I.

Suply of 63 amp,415 V,Fuse link porcelain,rewireable including all complete job as per direction of E/I

Supply of metal Exaust Fan 12"(300mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

Supply and fixing 15/16 watt LED Bulb including all complete job as per direction of E/I.

Providing & fixing chaukhats panneling with wooden framed by 12mm thck both side best quality ply and 4mm thick veneer pasting,finishing with all materials and labour all complete job as per building specification and direction of E/I.

Providing and fixing 30 mm door shutter with wooden framed by both side best quality ply -4mm thick veneer both side pasting finishing with melamine paint with all materials and labour all complete (including all fancy type fitting)as per building specifiction and direction of E/I.

Providing & fixing of modular kitchen cup board 19mm thick BWP board of century ply on front top side with rack 1.5mm thick laminate laminated 2’0”x1’6”x0’9” steel rock hing bocket with teak wood beads and copping provision of all fitting of modular kitchen component such as shutters, channel rail ,nut bolts, hings glass all modular fitting all as pr building specification and direction of E/I Century mark ply & laminate,channel lock Handle and other fittings are hettich make, door closer Godrej & edge brinding with PVC all complete job(Including frame work of cocking plate form)

S/F/F 2 fet deep upper head cabinet,Rack,or wall unit file cabinet including allmaterials,labour,taxes all complete as per building specification and direction of E/I.ply Board-19mm thick green,centure or ISI mark water proof ply Grade,outside Laminate:1.5 mm thick green Lam/century Lam, inside Laminate channel/soft closing hinge:-Hetich(202 S.S.grade) lock of Furniture:Godrrej/cent,Handle/Jali-Brass/S.S.finish Handel,Door closer-Helix/Ebco/Hettich/Yama(202-SS grade) edge Binding-same Laminate/PVC

Providing and fixing wall paper of decorative approved design as per direction of E/I. inclouding cost of wall paper,adhesive,labour and scaffolding all complete as per direction of E/I.

WPC LOUVER made of aluminium channel(38*25mm) with cleat angle (50*50*5mm thick) necessary hardware,supply and fixing of WPC louver including all necessary frame work & complete in all respect.The surface will be funishede with on side WPC material & service costing on reverse side cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Supplying and fixing of Jaquar wash down water closet (EWC) MAKE IT Jaquar P trap pattern 3(Fig 2A)water closet(DSR-WHT 37953 BIUFSM) Product id 5116877-59437028766 including all complete job as per direction of E/I.

Supplying and fixing of Adhunik switchgears push Button Type Flushing cistern Dual Flush system 10ltr Product id: 5116877-49492748952 including all complete job

Supplying and fixing of 2 way Bib cock for health faucet Product id: 5116877-46224966212including all complete job.

Supplying and fixing of health faucet with 1meter long Easy flex tube in chrome finish & wall flap including all complete job.

Supplying fitting of pride LIQUID SOAP DISPENSER,capacity 100 mililiter product id: 5116877-37197799589 including all complete job.

Supplying and fixing Jaquar vitreous china sinks/wash Basins Flat kBack and Rectangle(DRS WHT 37601) product id:5116877-95681183220 including all complete job.

Supplying fitting of Vijay waste fitting for size 32mm dia product id 5116877-98475055076 including all complete job.

Supplying fitting of CAVIER 15MM leaded Tin Bronze Fancy Tap (SO 04-205 CAVIER SINGLE LEVER 6")product id: 5116877-56740054860including all complete job.

Supplying and fixing shakti 15MM Brass(Extruded Rolled,cast,die cast)Stop valve(CP ANGLE COCK,HW8206)product id:5116877-74826652122 including all complete job.

Supplying fitting of ADHUNIK SWITCHGEARS 450MM Connection pipe wuth nuts product id: 5116877-9290703887 including all complete job.

Supplying and fixing of Towel rail make it jaquar with c at no (Single Towel rain 600mm(AKP-35711P) and product it 5116877- including all complete job.

Supplying and fixing PRAYAG SOAP DISH -CASE STAINLES STEEL Product id:5116877-852871944845including all complete job.

Supplying and fixing Jaquar Bathroom concealed showers cast Brass Grade LCB-2 OF IS:292/1983 Jaquar make it Jaquar with cat no (JAQUAR 1 BY SHOWER K AND K) Product id:5116877-97394641774 including all complete job.

Supplying and fixing Jaquar Bathroom Exposed Rain showers cast Brass Grade LCB-2 OF IS:292/1983 Product id:5116877-64343872599 including all complete job.

Supplying &fixing PRIMA 15mm Brass Fancy Tap PRIMA(Wall mixer 3 in 1 with L bend 15mm(POL 7116),product Id: 5116877-24897712273 including all complete job.

Supplying fitting and fixing of BAJAJ 25 liter 4 star water Heater in all complete job.Product id: 5116877-99621432880

Providig and fixing V Guard 6 lit 5 star water Heater andproduct id 5116877-67101054446) including all complete jobb.

Providig and fixing SHAKTI 20mm copper tube Fancy Tap SKAKTI make(KITCHEN STEEL SINK WITH DRAIN) andproduct id 5116877-52039965470)

Providig and fixing PRIDE 15mm Brass Fancy Tap PRIDE make CP wall Mounted sink mixer) andproduct id 5116877-16845299419)

Providig and fixing ISKON-G Bathroom Or Toilet Mirror Hanging system make (ISKON-G MIRROR) andproduct id 5116877-76230367352)

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES (BID ID -675528)