W-ANP/A/SE HQ/CEMD/6000003030_00

Amount

Routine maintenance of street lighting system in permanent colony, CISF colony of ATP, Anpara.

Routine ON/OFF operation of streetlights of ATP, Anpara.

Routine Checking of different capacity 11/0.4 kV Transformers of Permanent Colony, CISF Colony, Kakri Wharf wall & attending Maintenance of 11/0.4 kV transformers of ATP, Anpara.

Trimming of Tree Branches touching/ lying adjacent to the 11 KV/ LT Line & Street Light Poles in ATP Colony, Anpara. (As per Scope of Work)

Cleaning of Jungles/Bushes below the 11 kV, 0.4 kV Lines, Street Light Poles & around Transformers; including uprooting of Vegetation, Grasses, Bushes, Shrubs etc. around 11 kV underground cable. (As per Scope of Work)

Painting of Electric Poles (including street light poles) preparing of pole surface by rubbing, scraping & cleaning the surface with wire brush, sandpaper & petrol/kerosene etc.

Painting of complete DT Pole structure/Double Pole structure after preparing after preparing of pole surface by rubbing, scraping & cleaning the surface with wire brush, sandpaper & petrol/kerosene etc. (As per Scope of Work)

Painting of Pale fencing of different DT pale fencings after preparation of surfaces by cleaning, rubbing by wire brush, sandpapers; (size of one pale fencing is approx. 0.46 sq.m.)

Painting of Sheds/Canopies (both sides) installed at ATP Colony, Shed Area etc. (surface area of single face of one side of canopy is approx. 1x1.5 sq. m.)

Fabrication & Erection & Installation of canopies/LT Distribution panels for installations at permanent colony, CISF Colony, Shed Area etc. of ATP Anpara. (Approx. Dimension 1X1X1.5 Mtr.) (as per drawing or site requirement)

Providing and laying of CC (1:2:4) i.e. 1 Cement: 2 Coarse/Sand: 4 Coarse aggregate in grouting on structured steel columns and their structure including excavation, chipping etc. (of size 0.5X0.5X1.0 Mtr)

Repairing of canopies of various panels/canopies located in colony & Shed area of ATP, Anpara. (Approx. Dimension 1X1X1.5 Mtr)

Providing and fixing of lightening conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes etc. complete as required. (DSR Code 6.2)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR Code 5.2)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required (DSR Code 5.11)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For Vertical run) (DSR Code 6.8)

G K P Const. Project Company

M/S B. B. S. CONSTRUCTION

M/S SCINTECS PROCESS CONTROL