Haryana

To Be Opened

Works

Civil Works

Beautification and Development of Undeveloped Park through Plantation of Grass, Shrubs, etc. in ward office park, Sanjay colony, Ward No. 5, Division-I, Faridabad.

Haryana Government

Faridabad (MC) | Faridabad, Haryana

Amount: ₹1.1 CrCloses: 6 Jul 2026Closed

Timeline

Published26 Jun 2026
Closed6 Jul 2026
Bid Opening7 Jul 2026

Tender Value

₹1.1 Cr

EMD Value

₹2.2 L

Closing Date

6 Jul 2026, 6:55 pmClosed

Tender Inviting Organisation

Name

SATPAL

Address

Municipal Corporation Faridabad

Work Description

Beautification and Development of Undeveloped Park through Plantation of Grass, Shrubs, etc. in ward office park, Sanjay colony, Ward No. 5, Division-I, Faridabad.

Tender Information

Tender ID

2026_HRY_531961_1

Reference Number

20260F856B3A 1A87 4519 9A84 FA17B6775104284ULB

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

150 days

Location

Faridabad (MC)

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredTechnical Bid (.pdf)

Finance

RequiredFinancial Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹15,000

EMD Fee Amount

₹2.2 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

26 Jun 2026

Published

26 Jun 2026

Bid Opening

7 Jul 2026

Download Starts

26 Jun 2026

Download Ends

6 Jul 2026

Submission Starts

26 Jun 2026

Clarification Period

26 Jun 2026 - 28 Jun 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (29 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing at water supply connection in existing line.	1	Job	-	-
2	Transportation All items	1	Each	-	-
3	Installation charge all items	13	Each	-	-
4	S/F of 1HP Monoblock motor pump of reputed make ISI mark	1	Each	-	-
5	P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.	1	Each	-	-
6	P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used	1	Each	-	-
7	P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.	1	Each	-	-
8	P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick,	1	Each	-	-
9	P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick.	1	Each	-	-
10	P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick	1	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.75 MB

Work Item Documents

BOQ_611014.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing at water supply connection in existing line.

Job

Transportation All items

Each

Installation charge all items

Each

S/F of 1HP Monoblock motor pump of reputed make ISI mark

Each

P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.

Each

P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used

Each

P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.

Each

P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick,

Each

P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick.

Each

P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick

Each