GE (N) P/TOKEN- 19 OF 2020-2021 ADDN/ ALTN TO WALL PANELLING, FALSE CEILING AND LIGHTING IN JOIR IN BLDG NO. 11 AND OTHER SANCTIONED WORKS IN HQ SOUTHERN COMMAND OFFICE COMPLEX IN THE AREA OF AGE BR (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks, exc. 10cm in width with PCC type B1, 1:2:4 (using 20 mm graded stone aggregate) and set in CM (1:6) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks (Non modular, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 3 and not exc. 6Sq.cm complete all as specified and as directed.

Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 6 and not exc. 13Sq.cm complete all as specified and as directed.

Material and labour for 1st class hard wood plain fillets, square, rectangular or triangular in section, bull-nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails or brads, sectional area exc 13 and not exc. 25Sq.cm complete all as specified and as directed.

Supplied and fixed in skirting for 10 mm thick 1st class hard wood (teakwood) boarding planed one side & edges tongued and grooved or rebated and fixed with screws all as specified and as directed by Engr-in-charge.

Material and labour for 1st class hardwood (teak wood), designer, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints for door/ window or similar work cut round to and fixing in arches all as specified and as directed .

Supply and fix for 40mm thick 1st class HW (teak wood) framed, panelled designer shutters (any number of panels), with designer panels of 1st class HW (teak wood) raised and have bevelled or chamfered margins (for each side) supplied and fitted to chowkats complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Supply and fix for 100 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolt, fixed with screws complete all as specified and as directed.

Supply and fix for 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Supply and fix for 75mm size butt hinges, cast brass, type D-11 with mild steel hinge pin, bright polished and fixed with screws complete all as specified and as directed .

Supply and fix for 100mm size butt hinges, cast brass, type D-11 with mild steel hinge pin, bright polished and fixed with screws complete all as specified and as directed .

Supply and fix for 75mm size butt hinges, extruded brass, type D-11 with stainless steel hinge pin, bright polished and fixed with screws complete all as specified and as directed .

Supply and fix, 300mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

Supply and fix in repair for 100mm size CP brass handles, cast type, polished complete all as specified and as directed (conforming to the sample kept in GE office).

Supply and fix for 100mm size brass handles, cast type, polished complete all as specified and as directed (conforming to the sample kept in GE office).

Supply and fix for 150mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed (conforming to the sample kept in GE office).

Supply and fix for brass cup board lock, size 75mm of 6 levers with duplicate key complete all as specified and as directed.

Supply and fix for brass cup board lock with key hole, size 50mm of grade-I, 4 levers with duplicate key complete all as specified and as directed.

Supply and fix for floor door stopper of brass body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed.

Supply and fix in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. conforming Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed.

Supply and fix for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

M & L for aluminium partition powder coated frame for partition, door, window, ventilators/ventilator shutter, snap grid etc. ( Minimum thickness of powder coating 50 micron) complete all as specified and as directed.

Supply and fix for aluminium anodised powder coated three track sliding window with two glazed shutters, one shutter with and including 4mm thick ordinary quality float glass and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc. complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for 4mm thick aluminium composite panel fixed in partition complete all as specified and directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet having manglore tile pattern impressions of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridge, valley gutters fixed with self tapping screws with side lap complete all as specified and as directed.

Taking down & removing old water proofing treatment of any description including plaster and cleaning the surfaces of slab with wire brushes, removing dust, foreign materials including flushing at junctions of wall and removing the rubbish off the premises to a distance exc. 500 m & n exc 1.5km all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by steps of treatment as under:- (a) On the dried plastered surface, one coat of approved bituminous primer @ 0.40 ltr/Sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker shall be applied. (b) Over this primered surface one coat of hot blown bitumen of 85/25 shall be applied @1.20 kg/Sqm (b) APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid over the hot bitumen to make it sandwitched with bitumen on roof surfaces (c) Apply two coats of bituminous aluminium paint. (e) the overlap of APP shall be done with torch application, a minimum overlap of 150mm shall be made at the end and 100mm shall be made at the longitudinal sides of the polymeric membrance respectively and sealed all ovelaps and joints as per Manufacturers instructions. (Notes: (i) The contractor/Company shall furnish 10 years performance warranty as per manufacturer of material (ii) The work should be done by a company recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist).

M&L for three coat smart care damp proof treatment make burger/Asian/ pidilite over chajja/ wall/ priming to RCC roof slab shall be carried out as specified on existing roof slab and parapet walls including scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, cupboards, racks and wall panelling, to the size and pattern as directed including fixing on walls, floors etc. complete all as specified directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, cupboards, racks and wall panelling to the size and pattern as directed including fixing on walls, floors etc. complete all as specified and as directed.

Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, racks and wall panelling to the size and pattern as directed including fixing on walls, floors etc. complete all as specified and as directed.

Material and labour for 4mm thick one side decorative group match veneer complete all as specified and as directed.

Taking down Decorative lamination veneer from shelves/built in joinery/built in furniture complete all as specified and as directed.

Material and labour for 12mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.5mm x 23.5mm x 1.5 mm thick main tee, 25 mm x 23.5 mm x 1.28 mm cross tee and 25mm x 23.5mm x 1.2mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Height of ceiling is above 5 metres.

Material and labour for designer false ceiling with 10mm thick 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound/ acrylic distemper over a coat of primer complete all as specified and as directed. Note: POP ceiling to be made in two/ three tier design.

Material and labour for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling including dismantling existing complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in roof padding, finished fair and even complete all as specified and as directed.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for 10mm thick rendering in cement mortar (1:3) mixed with integral water proofing compound as per manufacturer's instructions on roof slab finished even and fair complete all as specified and as directed. (Note: waterproofing compound shall be measured and paid separately under relevant item).

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces and provn of sagol finish complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar on fair faces of brick or concrete surfaces in two layers i.e. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with integral water proofing compound as per manufacturer's instructions with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Material and labour for rendering 15mm thick in cement mortar on fair faces of brick or concrete surfaces in two layers i.e. Ist layer of 10 mm thick rendering in cement mortar (1:4 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with integral water proofing compound as per manufacturer's instructions with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, mixed with integral water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement with spong finish complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for complete removal of existing finish /treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc. and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for complete removal of existing finish /treatment on ceiling using steel wire brush, sanding machine, rubbing ivory papers etc. and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for appying 1 to 1.5mm thick white cementitious wall care fine putty on walls, filling cracks by crack filler and smoothen surface with sand paper complete all as specified and as directed.

Material and labour for appying 1 to 1.5mm thick white cementitious wall care putty on ceiling, filling cracks by crack filler and smoothen surface with sand papercomplete all as specified and as directed.

Material and labour for preparation of new plastered wall surface and appying two coats of 100% acrylic exterior emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for appying two coats of 100% acrylic exterior emulsion paint over a coat of primer to mangalore tiles, roof, parapet, wall, floor etc. on heritage buildings complete all as specified and as directed. NOTE: The height in old vintage/ heritage buildings is upto 15 Metres.

Material and labour for applying two coats of lustre paint (water based) over a coat of primer on wall/ ceiling surface complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound distemper over a coat of priming paint complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Material and labour for applying two coats of plastic emulsion paint over a coat of primer on wall/ ceiling surface complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of wall/ window/ railing/ floors/ wall panelling/ door/ staircase surface etc, application of resin pigment and hardener to desired colour and pattern and applying two coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.

Supply and fix 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 80mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of tank exc.1000 litres and n.exc. 2000 litres complete all as directed

Supply and fix for 1000 litres capacity, rotational moulded polythelene water storage tanks (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion including 25mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and connected fittings including dismantling existing tank complete all as specified and as directed.

Supply and fix for 10000 litres capacity, rotational moulded polythelene water storage tanks 4 layer, anti bacterial (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion and connected fittings complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair 10mm thick corner glass of size 250 mm x 300 mm with D bracket stainless steel complete all as specified and as directed.

Supply and fix 12mm thick glass with crystal polish with fixing clips CP beading or D bracket as per manufacturer's instructions complete all as directed.

Dismantling wooden boarding/ plywood of any description and any thickness including fillets fixed in any position with nails complete all as directed.

Dismantling structural steel work including doors, gates including framed truss etc. complete all as directed.

Dismantling plain or corrugated steel sheeting , AC sheet any gauge, thickness sheets including Nainital or similar pattern roof coverings complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Demolition and breaking up 75 to 110mm internal dia drain pipes (salt glazed earthern ware, PVC/ AC or reinforced concrete), set in cement mortar complete all as directed.

Removing excavated soil, debris obtained from demolition from various locations (other than this work) from site to outside MOD land complete all as as directed. The location at out side MOD land for disposal shall be located by the contractor himself).

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit including removal of batten/ conduit/ gutties/ wooden boards/ switchs/ sockets/ regulators/ holders/ ceiling roses/ call bells etc. and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the existing unserviceable down light recess mounted of any type/ capacity/ description as existing at site and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, 20 mm dia rigid PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.96 here-in-before but point wiring for one ceiling/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.96 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on same board.

All as per serial item No.96 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.96 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15 Amps socket outlet on independent board.

Supply and fix for modular switch, one way 6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 16 Amprs, 1 module with neon indicator complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose 2/3 pin 6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 2/3 pin, 6/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for ceiling rose, 2/3 terminals, PVC/ polycarbonate type, isolated body suitable ISI marked complete all as specified and as directed.

S & F LED down light recess mounted luminare, round type COB based 20 watts with 36 degree beam angle of 4000K , aluminium housing natural white, operating voltage 150 V-270 V AC, 50 Hz suitable for conference hall all as specified and directed. Make: JAQUAR Cat Part No LERS02R020XN or equivalent in Bajaj, Philips, Wipro, Havells

S & F LED multiple Zoom light recess mounted luminare, round type tilltable COB based 2 x 15 watts of 4000K, with anodised reflector & tempered transferable glass diffuser aluminium housing natural white, operating voltage 150 V-270 V AC, 50 Hz suitable for conference hall wall washing light all as specified and directed. Make: JAQUAR Cat Part No LZOMMLR215N or equivalent in Bajaj, Philips, Wipro, Havells

Supply and fix recess mounted Luminare LED Glareless downlight fitting aluminium housing mirror finish, COB based with cone 46 degree beam angle, 4000K rated 19.8Watt operating voltage 150 V-270 V AC, 50 Hz Analog Dimmable round type suitable for conference hall all as specified and directed. Make - Endo or Equivalent of Jaquar, Bajaj, Philips, Wipro, Havells

S&F for wall mounted type fan of size 450mm sweep with aluminium blade 240 volt AC 50 HZ single phase and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connecter to fan complete all as specified and directed. Make: Havells model No V3 or equivalent of khaitan, Usha, Bajaj, Crompton, Havells

Supply and fixing of exhaust fan plastic body of 200mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Bajaj Cat Part No. Maxma DX 8" or equivalent of Usha, Crompton, Havells

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit white/ ivory and conduit accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Supply and fix cable tray Heavy Duty, Hot Dip Galvanised Steel 3m x 75mm x 50mm complete all as specified and as directed. Make Legrand Mfr part No. SRFL/75/G or equivalent of S&S, L&T, Havells, Seimens

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Sujitha Infrastructure

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD

ganesh electricals and airconditioners

M/S OMSAI ENTERPRISES

J P ASSOCIATES

M/s Asrani and sons