Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.3 LAccepted-Finance | 1 | Accepted-Finance IT IS FOUND OK |
Tender Value
₹2.7 L
EMD Value
₹5,500
Closing Date
13 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (Civil) BSNL mysore
BSNL Civil Division, Room 103, ZTTC ADMN BLOCK, PADUVANA Raste, TK layout Mysore
Maintenance and Repairs to Admin. Building at Tumkur.
2023_BSNL_168901_2
13/BSNL/CD/MYS/2023-24
Open Tender
Civil Works - Buildings
Item Rate
60 days
Tumkur
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
BSNL TELECOM DIST MYSORE
₹5,500
17 Nov 2023
4 Nov 2023
15 Nov 2023
4 Nov 2023
13 Nov 2023
4 Nov 2023
4 Nov 2023 - 13 Nov 2023
Amount
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
Repairs to Aluminium door including removing and refixing, with providing necessary fittings like horizontal M.S.rod, S.S. angles at corners, required hinges etc. complete for smooth movement of door, as per the directions of Engineer in charge.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
75 mm diametre
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.
Single tee with door
75 mm bend
110 mm bend
Finishing walls with water proofing cement paint of required shade :
New work (Two or more coats applied @ 3.84 kg/10 sqm).
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :
One or more coats on old work.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
One or more coats on old work.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.
With cement mortar 1:4 (1 cement : 4 fine sand).
Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
Dismantling old damaged urinal basins including disconnecting the connections properly and disposal of rubbish to the dumping ground as directed.
Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
10 litre capacity - White
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
White solid plastic seat with lid
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
Flat back wash basin of size 450x300 mm.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe
40 mm dia
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Rectangular shape 453x357 mm
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
Cleaning of manholes by removing deposited silt and other waste material from drainage manholes and sewer lines including rodding and flushing with water as directed.(Rate is per one manhole and sewer line upto next manhole)
Providing and fixing 15 mm nominal dia PTMT hand shower with flexible tube upto 1.2 metre long with spray head of approved quality and make for Eureopean type W.C. pan as approved by Engineer - in - charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
20 mm nominal outer dia. Pipes.
25 mm nominal outer dia .Pipes.
32 mm nominal outer dia. Pipes.
40 mm nominal outer dia. Pipes.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
Providing and fixing PTMT bib cock of approved quality and colour.
15 mm nominal bore, 122 mm long. Weighing not less than 99 gms.
Providing and fixing PTMT stop cock of approved quality and colour.
15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT pillar cock of approved quality and colour .
15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms.
Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms.
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
15 mm nominal bore with 45 cm length.
Removing and refixing of wash basin for maintenance and repair works including fixing with new brackets, screws etc. complete as per the direction of Engineer-in-charge.
Removing grownup bush/any type of vegetation on building walls( at all Level ) / terraces including dismantling plaster, cutting bush, burning stem with acid or tar and patch plastering at all levels.
Cleaning of terrace/spouts/khurras/ anopy/Blocked Chajjas etc, by Removing leaves, grass,dust,Rubbish and other deposited/accumulated Materials etc including disposal of Rubbish to dumping ground up to a distance of 50m outside the periphery of building etc. cleaning of Terraces, accessible canopy ,chajjas & likes etc. complete as per the direction of the Engineer-in- charge.
Filling cracks by making grove & using 'Dr. Fixit Crack - X powder or equivalent polymer crack filling material, including zula etc. complete at any floor level and as per direction of Engineer-in-charge.
Repairs to PVC flushing cistern of 5 to 10 Ltr capacity of any make and size including replacing defective part like ball valve, flushing knob etc. wherever required. Rate inclusive of all materials and labours only.
Cutting of tree branches in all floors and all heights mechanically with cutting mechine including stacking of wood pieces with in 50M lead etc complete as directed by the engineer in charge.
Removing and refixing of PVC door shutter of any size & thickness by removing of old hinges and refixing new steel hinges making necessary repairs as required & proper fixing of existing fittings, so as to ensure smooth functional operation of the door including required nails, screws etc. all complete as directed by the Engineer-in-charge.
Providing and fixing Cudappah stone patti, for door sill, size 40 mm to 75mm width, thickness 25mm to 40mm and length up to 1.5m fixed in position with metal paste or suitable adhesive etc. complete as per the directions of Engineer-in-Charge.
Clearing of blockage in floor trap/ s-trap and conncected sewer line up to manhole at all levels including rodding with G.I wire of suitable thickness in blocked SWR pipes up to required length and removing rubbish / sludge and disposal of the same up to a lead of 100m complete as per the directions of Engineer-in-charge.
Fixing of available box type office Board of size- 5.80m x 1.84m x 0.24m, at frontside of Admin. Building/GM office at required location/height including carriage, lift and making proper fixing arrangement, providing & pasting approved quality new flex of required thickness on existing board with printing the given office/advertisment matter with required lettering, colour, shade, symbol etc. complete and making suitable lighting arrangement infront of board from outside complete as per direction of Engineer in charge.
Removing of existing box type BSNL logo Board of size- 1.24m x 1.24m, at terrace of Admin. Building and providing & pasting new flex of required thickness on existing box type board with printing of given office/advertisment matter, Logo with required lettering, colour, shade, symbol etc. and refixing board at same location, including handling, making proper fixing arrangement etc. complete as per direction of Engineer in charge.
Cleaning of Toilet unit including water closets, urinals, wash basins existing in the toilet unit with toilet cleaner and cleaning ceramic tile flooring / dado upto 1.83m height, by rubbing with scrubbers, using mild acid, toilet cleaner,detergent powder and flushing with water, removing of spider webs etc. complete, as directed by Engineer in charge.
Toilet unit of area- 2.90m x 2.80m (appx.)
Toilet unit of area- 1.70m x 2.00m (appx.)
Shifting of 3 no.-steel cupboards, 2 no.-wooden racks, and 3 no.- Tables,doors and other materials from staircase portion of ground floor Admin building to store room near tower, lead upto 100m and stacking in position properly complete, as per the directions of Engineer in charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .