REPAIR TO ROAD SIDE FURNITURE, DRAIN, COMPOUND WALL PATH AND OTHER B/R REPAIR WORK UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Cleaning and preparing the old painted road surface for road making with reflective thermoplastic white road marking paint confirming to BIS 3262 laid by road marking machine in a layer of CRYSTALIEX using 5 kg material per Square metre by incorporating the white glass beads for reflective in 100 mm width all as directed.

M&L preparation of old concrete surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified.

M&L preparation of old concrete surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint complete all as specified.

Supply and fix in repairs delinetors made of ABS round body fitted with two Nos 100mm dia high reflective reflectors and having a pipe (duly powder coated) sponsor plate can also provided for sponsorship two small rectangalor reflectors of size 70mm x23mmx2 Nos each side are also provided for better reflectvity on pipe 100 cm long painted with white/black colour porvided, embeded in PCC (1:2:4) type B1 with 20mm graded stone aggreagate (size of block 15cm x 15cm x 10 cm) all as directed by enginner-in charge Make ; Model No DA- 74 Dark eye or equivelent of TATA BP/ Gogia Plastic/Red Safe/Froniter as approved by GE

S&F as in repair centre verge with spring posts material high quality yellow or black white combinations with chain and reflective tapes size : length 750mm & width 250mm weight 2250 grams Model No DA 1011 Dark eye or equivelent of TATA BP/Gogia Plastic/Red Safe/Froniter as approved by GE

S&F as in repair speed breaker made from heavy duty tough/rubber/ABS with high resistance wear tear property, best suitable speed Bump 2" height for speed restriction UV reflective reflectors available on both sides in red or yellow colour end caps available to avoid damages at per mtr edges size of each section H-50mm, W-250mm, L-350mm Model No D1005 dark eye or equivelent of TATA BP/Gogia Plastic/Red Safe/Froniter as approved by GE

S&F as in repairs standard quality solar stud aluminum alloy and PC construction, solar powered by monocrystal solar panel with product specification as under : Consturciton aluminum- alloy sheel, colr - Yellow, red, blue,green or white, 100% water proof design according to IP 65, working time- 3 to 4 days after fully charged battery, Dimension 125mmx125mx25mm (shank 60mm), Charging Time- 5 to 6 hours from direct su light, High efficiency Mono- Cstalline solar panel 2.4V/0.3 watt) working Temp 10*-75*C, one -Ni-Mh or Ni-cd Rechargeable Battery (1.2V/1600MA), six super bright LED with 10,000 to 8000 med ( Milicendela) view distance upto 1000 meters, flash rate 2H2 or according to customers requirements bearable weight 10 tons approx. life span- three to five years. Model " DHRUV in dark eye or equivelent in TATA BP/Gogia Plastic/Red Safe/Froniter as approved by GE

Writing letters or figures (block, roman, italic or Indain) not exc 50cm high and 30cm wide with road marking paint or golden yellow as directed.

M&L preparation of old surface of walls and applying one coat of cement base paint of any tint all as directed.

M&L preparation of old surface of walls and applying two coats of cement base paint of any tint all as directed.

M&L preparation of old steel surfaces and applying one coat of synthetic enamel paint all as specified.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) including of rubbish out side of MOD land.

M&L PCC 1:4:8 type D-2 40mm graded aggregate in sub base of floors

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in cement mortar including of rubbish out side of MOD land.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement over 25mm sand (tibba sand) thickness complete all specified.

M&L machine pressed concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement laid over and including 25mm thickness sand cushion layer complete.

All as per item No 16 above but except tiles.

M&L factory made rubber moulded chequered cement concrete tiles, 20cm x 20cm, 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement slurry in floors with grey cement and pigment over and including 20mm thick screed bed in CM 1:6.

All as per item No 18 above but except tiles.

M&L precast cement concrete blocks or slabs 150mm thick (1:2:4) mix type B-1 using 20mm graded aggregated with plain or intelocking joints as directed complete in walls setting in CM 1:6.

M&L providing reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in precast posts, fencing posts straining or terminal post struts etc for fencing average sectional area exc 100 sqcm and not exc 250 sqcm with or without chamfered angles and flat splaved rounded or mitred tops as directed.

Demolition of precast RCC jallies including raming of any description any in any position set in cement mortar complete all as specified including of rubbish out side of MOD land.

M&L providing precast cement concrete 1:2:4 louvers and jallies 25mm thick (measured solid) including all mouldings but includings frame & set in CM 1:4.

M&L precast reinforced cement concrete slab type B-1, 1:2:4 (20mm graded aggregate) as in landing, drain cover slab (for manholes etc), chajjas, drain cover and shelves and similar articles with plain faces( Reinforcement shall be paid separately)

M&L TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or secruing with clips.

M&L mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required, incl cranking, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia.

Taking down cement plaster or cement lime plaster on brick/stone surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc including of rubbish out side of MOD land.

M&L rendering 15mm thick on stone masonary surface or on surfaces other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces CM 1:4 and smooth without using extra cement .

M&L preparation of new plastered wall surfaces and applying two coats of cement base paint on wall.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins arches pillars etc but exc ashlar facings dressed stonework and precast concrete articles including of rubbish out side of MOD land.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

All as per item No 32 above but except brick

M&L stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 for raising height of drain/culvert all as specified and as directed.

All as per item No 34 above but except stone.

M&L extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto courses, with maximum depression on face from straight edge held against the dressed surface on lime or sand stone not exc 40 mm.

M&L granite (of any type), 16mm to 18mm thick work (table rubbed and polished) in steps jamps pillars window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite.

M & L Dholpur stone work 16 to 18mm thick cladding gang saw cut with machine cut edges uniform colour of each stone size exc 0.25 sqm area and not exc 0.5 sqm fixed, set, jointed and pointed in neat cement slurry in floors with grey cement slurry in floors with grey cement and pigment over and including 20mm thick screed bed in CM 1:6.

M&L machine kota stone slab flooring 20-25mm thick size of kots stone 450x450 mm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

S&F as in repairs 18mm thick pre-laminated MDF board one side decorative lamination & other side balancing lamination sheet of approved colour for modular shutter, boxes drawer including stainless steel popet hinges, hanldes, sliding rollder with channel complete all as specified.

Dismantling post or struts (wood, steel or RCC) any sectuion including taking out embedded portion and making good disturb ground post embedded in natural ground.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil.

S&F rolled mild steel work as in joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary lenghts i.e within 20mm of the length directed) and similar work conforming to Fe-290 Gde E-165.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire Note : Supply only chain link fencing shall be measured and paid separately

Supply only mild steel galvanized chain link fencing 4mm dia of mesh wire, mesh size 100x100mm including line wires complete all as specified and directed.

S&F galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directed

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for chain link fencing.

M&L preparation of new concrete surfaces of any description over 10cm girth or width , not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified

S&F mild steel framed work as in door or gates of angle or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittingsand hanging also fasterning and fixing complete

S&F mild steel plain black sheet 1.25mm thick in hearths, covering to door shutters, chullah hoods, ducts and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

Dismantling galvanised chain link fencing of any description fixed to any type of fencing posts

S&F as in repair traffic barricades (traffic barriers) high quality flexible plastic using UV stabilizers of ovar all ht 750mm of Dark Eye or equivelent in gogia plastic & sun traders or equivalent of approved.

S&F as in repair road safety cones made of high quality flexible plastic using UV stabilizers of over all size 950mm, base size 395mmx 395mm weight appx 5200gm model No 814 Dark eye or equivalent of TATA BP/Gogia Plastic/Red Safe/Froniter all as approved and directed by GE.

M&L providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, lacing courses, parapets, and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water through and the like including weathering slightly rounded for chamfered angles and throating all as directed

M&L cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth with using extra cement.

M&L rendering 10mm thick on fair faces of brick work /stone masonary in drain finished even and smooth without using extra cement in CM 1:4

M&L for granding or polishing old stone surfaces of any type including cutting rubbing and filling the joints with cement and pigment to match the shade of slabs all as specified.

S&F in repair PVC SWR pipe 110mm dia for drain out water from road under footpath including taking down old pipe and making good with the existing surface.

S&F as in repair of reflectors standard quality 144.5mm dia fixed complete.

S&F in repair of reflectors to delineators of standard quality 100mm dia complete.

Schedule of Credit

J.J.ENGINEERING

M/S Mohan Lal Gupta

S.R.Enterprises

Shiv Construction Company

M/S JALANDRA CONSTRUCTIONS

UNIVERSAL INFRAPROJECT PVT LTD

Smita Constructions