CONSTRUCTION OF STAFF CAR PARKING AND A GARAGE.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding1.5min width)and for shafts,wells,cess pits and the likenot exceeding 10 sqmon plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: ( All kinds of soil)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying of stone soling (Hand Packed) including ramming, dressing and watering all complete.(Incl. all sorts of carriage)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl all carriages of material from source to site of work

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding thecost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3(1cement :1½coarse sand: 3graded stone aggregate 20 mm nominal size) crushed aggregate Incl all carriage

Centring and shuttering including strutting, propping etc and removal of form work Foundations, footings, bases for columns

Centring and shuttering including strutting, propping etc and removal of form work Columns, pillars, piers, abutments, posts and struts

Providing and laying and placing high strength doformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more,

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing HR Colour coated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick with zinc coating not less than 275 gram/m2 of require shade and color incl ridges hips valleys all complete job as per directions of Engineer in Charge