Name of Work Rejuvenation Improvement of Spring Sources at various locations in Shimla City

Amount

Excavation in earth work i/c dressing of sides and beds.disposing of all excavated earth upto all lead and lifts disposed earth to be levelled and neatly dressed. P.J work Complete in all respact as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 ( 1cement:46sand: 8 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work in foundation and plinth including all leads and lifts complete in all respect as per the direction of Engineer-in-charge.

Brick work using common burnt clay building bricks in Cement Mortar 1: 6 ( 1 Cement : 6 Sand) in superstructure including all leads and lifts complete in all respect as per direction by Engineer in Charge.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in: Suspended floors roofs, landings and shelves and their supports, balconies,beams, girders, bressumers and cantilevers upto floor two level.

Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level. Tor steel. Including all leads and lifts complete in all respect and as per the direction of Engineer-in-charge.

Steel work welded in built up sections, trusses and fremed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead pait:- In gratings, framed guards, bars, ledders railings, brackets & similar works including all leads and lifts complete in all respects and as per direction of Engineer in Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges

15mm thick cement plasters in single coat on rough side of brick/concrete /stone walls for exterior plastering up to all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in grith and finished even and smooth with cement morter 1:6 (1 cement : 6 sand) within all leads , lifts of materials complete in all respect as per direction of Engineer in Charge.

P/L 12 mm thich red Stone in CM 1:3 ( 1 cement; 3 Sand) finished with flushed pointing complete in all respect as per direction of Engineer in Charge.

P/F GI pipe 32 mm dia (M) classcomplete in all respect as per direction of Engineer in Charge.

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand) in breast walls and retaining walls.complete in all respect as per direction of Engineer in Charge.

White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement.complete in all respect as per direction of Engineer in Charge.

P/F 10 Micron Cartridge 5 Micron 1 Micron 0.2 Micron one each with polycarbonate housing 20mm inlet/outlet complete in each all respect as per direction of Engineer in Charge.

ANSHUMAN THAKUR

Mohinder Sharma