801395/E8 WORK SERVICES FOR PROVISION AND RE-CONSTRUCTION OF LIVING IN ACCN AT ATS BELGAVI

Amount

BOQ dated 18 May2021

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XII are prepriced by MES under Ser No. 2.00 to 14.0. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “Building or works” as listed in Schedule ‘A’ Part–I

Lumpsum price worked out by the contractor for “Items not covered in the lump sum building” as listed in Schedule ‘A’ Part–IA

Lumpsum price worked out by the contractor for “Site Clearance/ Development” as listed in Schedule ‘A’ Part–II

Lumpsum price worked out by the contractor for “Internal Water Supply” as listed in Schedule ‘A’ Part–III

Lumpsum price worked out by the contractor for “Internal Electrification” as listed in Schedule ‘A’ Part–IV

Lumpsum price worked out by the contractor for “Road/Culvert/Hardstanding” as listed in Schedule ‘A’ Part–V

Lumpsum price worked out by the contractor for “Area Drainage” as listed in Schedule ‘A’ Part–VI

Lumpsum price worked out by the contractor for “Sewage Disposal as listed in Schedule ‘A’ Part–VII

Lumpsum price worked out by the contractor for “Solar Water Heaters” as listed in Schedule ‘A’ Part–VIII

Lumpsum price worked out by the contractor for “Rain Water Harvesting” as listed in Schedule ‘A’ Part–IX

Lumpsum price worked out by the contractor for “Demolition” as listed in Schedule ‘A’ Part–X

Lumpsum price worked out by the contractor for “External Water Supply” as listed in Schedule ‘A’ Part–XI

Lumpsum price worked out by the contractor for “External Electric Supply” as listed in Schedule ‘A’ Part–XII

SCHEDULE `A' PART - XIII -Fittings, fixtures and Miscellaneous items is not prepriced by MES. Bidder shall insert their rates in Green filed under Col-6.

Water Cooler: Supply & Installing water cooler electric driven (single phase) having storage capacity of 150 Ltrs & nominal cooling capacity 150 Ltrs/hr fully stainless steel,two taps complete including connecting cord & plug top handling, connecting up with 20mm GI pipe medium grade one No gate valve 20mm and drain pipe 20mm GI complete all as specified & directed.Make: As per Annexure

Supply and fixing Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V,AC, 50Hz with under voltage/over voltage cut off, time delay etc with output voltage stabilized at voltage range 210 to 230 Volts and of capacity 2.0 KVA. Make: As per Annexure.

Solar Water Heater: Supply, installation connecting, testing & commissioning of solar water heating system with heat exchanger type of capacity 500 ltrs per day with electical backup by 3KW heating elements of two numbers and thermostates, collectors of ISI marked with required numbers of flat plate collectors and laser welded tube with stainless steel hot water storage tank 500 ltr including supply and fixing of SS heat exchanger made of SS 304 pipes of gauge 8 SWG inside the hot water storage tank providing angle iron structure of reqiured size for collectors and angle iron staging for the hot water tank made out of 25x4mm angle and MS flat in PCC work 1:2:4 Type B1 with 20 mm graded aggregate for foundation/fixing of solar water heating system including electrical connections from solar water heater to sheet metal plug top with not less than 3core 2.5sqmm multistranded PVC insulated copper wire as required at site complete all as specified and as directed.

Material& labour for lagging to pipes used in internal water supply or plumbing all round with 50 mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 of pipe of internal dia 25 mm complete all as directed.

Supply and fixing 16 Amps rating industrial wall mounted plug and socket 3P+N+E with box suitable for IP55 degree of protection complete all as specified and directed.

Chlorination Plant:Supply, Install, testing and commissioning of chemical (chlorine granuels) chlorination dosing plant suitable to inject upto 25 LPH comprising of dosing pump coupled with electric motor of capacity 0.5 HP, 1440 RPM, 230 V, 50 Hz, combined gear and motor assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank of capacity 150 litres complete assecessories to be mounted on MS fabricated frame including painting completely, drilling/taping and connnected to the delivery line with sutiable UPVC pipes and necessary fitiings of dia 15 mm, PP NRV of 15mm dia including three pin plug with 3 core PVC insulated multistranded copper conductor flexible cable upto 2mtr all as specified and as approved

Post top Lantern: M&L for post top lantern 40 watt LED prewired including 1.8m (above GL) length medium grade suitable GI pipe painted with two coats of black paint over a coat of primer and erretion work etc., with all accessories for fixing post top lantern complete all as specified and as directed & including 3 core 1.5 sqmm copper wire from FRP junction box to post top lantern. Make: CG, Cat No. LPTO-40-CDL or equivalent in Bajaj/Philips/Wipro

S & F of FRP junction box with self locking arrangement comprising of one no. MCB SP 6 Amps with suitable channel, 4 way 16A connector fixed to pole with MS clamps, nuts and bolts and connecting the incoming and outgoing cables all as specified and completed.

Central Alarm System: S & F of ISI marked electric siren motor operated system suitable for 230V with minimum audible range of 100 mtrs including all minor accessories such as nut, bolt, bell push etc. complete all as specified and directed.

Avaition Light: S & F of Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure, LED IP65, 230V, 50Hz,AC with integral driver, protection against short circuit and surge with super flex 5mm 302 Nos LED's etc provided with fixing arrangement such as bracket,MS clamp,nut, bolts etc and connecting all as specified and as directed.

Sewage Disposal : S&F Rungs formed out of MS rod of 16mm dia for steps ,encapsulated with PVC of size 180x270mm. ( 130mm concealed with concrete and 140mm projected ) complete all as specified and directed.

Material and Labour for SFRC heavy duty cover of dia 560mm (clear open)900mm outer to outer, with frame for manholes complete with specifcation comprising high tech concrete FI 90x 1.35mm thick outer cover, 4mm TMT wire mesh (core wire) with hook 4mm, 8mm TMT bar @ 100C/C at bottom, 10mm TMT bar @ 100mm C/C at top, 16mm TMT bar for flushed handles, RCC M-35 (Design Mix) concrete, outer cover/collar of metal set in CM 1:4 and width 90mm as per IS 12592 (2002) all as specified and as directed.

Material and Labour for Formwork to edges of concrete circular in plan/elevation, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work , n exc 10cm wide, fair finished surface all as specified and as directed.

Internal Electrification: Sub main wiring complete with four runs of 6.0 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with two runs of 6.0 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia rigid non metallic PVC conduit and conduit accessories concealed/ roof/wall all as specified and as directed. Note:- Four runs of FRLS cable,two runs of of earth continuity and one run of conduit will be measured as one length.

Sub main wiring complete with 2x 6.0 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6.0 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and 20mm dia of PVC rigid conduit and conduit accessories (concealed in walls) all as specified and as directed. Note:- Two runs of FRLS cable one runs of of earth continuity and one run of conduit will be measured as one length.

Supply and fix ceiling surface mounted 2x2 LED down light fitting 33/34watts with 6500 CCT with CRCA white powder coated housing withLEDs, seamless front frame with flat white high transmission acrylic cover and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as directed. Make:- Bajaj as per Cat No BZRSQL GX 34W CW/Philips cat No RC365B LED33-6500 PSU OD WH/Havells cat No PLUTOSURFACE2x2PLS34WLED840Sor its equivalent make as per Annexure.

Supply, fixing and testing of 4ft LED surface & wall mounted batten LED luminaires , 20 Watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integral electronic driver fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed.Make : Havells as per cat No ENDURALINEARNEOBS20WLED830SPCWH/ Wipro cat No LM34-251XXX-57DDGI/ Philips cat No BN150WLED20S-6500 PSCOD GR or equivalent of makes as per Annexure..

Supply, fixing and testing of 2ft LED surface & wall mounted batten LED luminaires , 10 Watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integral electronic driver fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make : Havells as per cat No ENDURALINEARNE OBS10WLED830SPCWH/ Wipro cat No LM34-930300 L57 WCG1/ Philips cat No BN021 LED 10S-6500 PSU GRS1 or equivalent of makes as per Annexure.

Supply,fixing and testing 20W High efficient LED Streetlight, pressure Die cast housing alongwith prismatic polycarbonate diffuser and LEDs with secondary optics and IP-65 protection including fixing arrangement and connecting with twin twisted flexible copper conductor cable of size 0.75 sq mm complete all as directed. Make-Bajaj as per cat No- BCLST 20W LED1 V2/ Havells cat No ENDURAPEARLSL 20WLED757SASYTOPC/ Philips cat No BRPO22 LED 20 CW MR S1PSUGR or equivalent of makes as per Annexure.

Supply and fixing glitz LED spot light, bed side flexible arm 3watt, warm white, 3000K with switch suitable for reading light including connecting with twin twisted copper conductor of size 0.50sqmm complete all as directed.

Note for items 31 to 35 : (i) Refer Annexure 'V' for the instructions to be followed for LED fittings. (ii) The contractor shall submit warranty certificate from manufacturer for both light and driver.

Supply and fix and connecting up Heavy duty Exhaust fan of size 300mm sweep,1400rpm including louvers complete,with cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3mm thick bakelite sheet cover including writing MES No 2cm height with synthetic enamel black paint all as directed . Make: As per Annexure. Note- The contractor shall submit warranty certificate from manufacturer for Exhaust fan .

Supply and fix and connecting up BLDC ceiling fan , 5 star rating of size 1200mm sweep complete including modular type fan step regulator suitable electronic 2 module, cable 3 core of size 0.5 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint complete all as specified and as directed . Make: Orient model-Hector 50 or its equivalent make as per Annexure. Note- The contractor shall submit warranty certificate from manufacturer for Ceiling fan .

Supply and fix MCB SP 6 to 32 Amps 240 volts 10 KA 50 HZ, C curve,complete all as directed.

Supply and fix MCB SPN 6 to 32 Amps 240 volts 10 KA 50 HZ, C curve complete all as directed.

Supply and fix MCB FP 32 Amps 415 volts 10 KA 50 HZ, C curve complete all as directed.

Supply and fix MCB FP 40 Amps 415 volts 10 KA 50 HZ, C curve complete all as directed.

Supply and fix MCB FP 63 Amps 415 volts 10 KA 50 HZ, C curve complete all as directed.

Supply and fix MCCB FP 100 Amps 415 volts with adjustable type, breaking capacity 16 KA complete all as directed.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4.00mm GI earth continuity conductor including 15 mm bore pipe Light grade for protection of lead by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel connected to maint switch control board upto 7.5 mt away from earth electrode all as shown as per plate No 03 of SSR part - I including necessary earth work, PCC 1:3:6 type C1 chamber, RCC cover slab of 50 mm thick 1:2:4 with 8 mm CTD 140 mm C/C with suitable handle, watering pipe 20 mm dia medium grade pipe with funnel, charcoal, salt and testing on completion and including taking out old unserviceable earthing with connected items all as directed.

External Water Supply: Supply and laying DI pipe ISI marked, single spigoted socketed including joints of suitable for push on rubber joints, class K-7 complete of 150mm dia in standard lengths including ISI marked joints of same work, laid in trenches complete all as directed.

S&F Non return sluice valves 100mm dia, cast iron ISI marked, flanged type PN 1.6 with necessary nuts, bolts, washers, rubber injection etc complete all as directed

M&L for costruction of valve pit chamber of size 900mm x 900 mm x 1000 mm (internal size) with 3.15 mm thick MS sheet cover and angle iron 50 x50 x6 mm thick fame embedded in 15 cm thick PCC coping with locking arrangement with two coats of synthetic enamel with internal external surfaces over a coat of red oxide primer including necessary excavation removal of surplus soil to a distance not exceeding 50 mtr returning, filling in PCC 1:3:6 type C2 75 mm thick as in foundation/floor brick work (one brick thick) in cement mortar (1:4), PCC 1:3:6 type C1 in coping, plastering in CM 1:4 and 75 mm thick hard core below foundation, 3 coats white wash etc including dismantling valve pit chamber complete all as specified and directed.

Supply, installation, testing & commissioning horizontal type submersible pump set suitable for 415 V, 3 phase system having capacity 15 HP with 100 mm dia pipe for suction and delivery, head range 18-36 Mtr, flow range 2400 to 1250 LPM, inclusive necessary electric connection from panel to motor with 3 core 6 Sqmm flat PVC copper submersible cable 1100 volt grade complete all as specified and directed. Note:- Cable will be measured & paid seperately under relevant item

Supply laying and testing copper flat flexible cable, electric power cables (heavy duty) with copper conductor, 1100 volts grade of size 3 core 6 sq mm complete all as specified and directed.

Cutting the existing PCC/bituminous road of any description to a size not exc. 0.5m wide x 1.10m deep for crossing of pipe including refilling, ramming and making top 100mm thick surface good with plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate complete all as specified and directed.

Supply, install, testing and commissioning of LT motor control panel AC 415 V, 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle, fully compartmentalized type, weather proof, protection IP 52 , suitable for outdoor use, with bottom cable entry with suitable cable glands structure made of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm, with four legs grouted to PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter and MCCBs , with sloping canopy at top, double hinged doors at front and back with suitable locking arrangement , provision of louvers at sides, structure treated under 8 - tank metal treatment process and duly powder coated with 200A electrical grade aluminium bus bar for phases and neutral complete with suitable digital type meters resin cast CTs, manufactured from factory having type tested certificate, internal wiring all including the following incoming complete all as specified and directed :-

M & L for Earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge of earth plate at a depth not less than 1.5 M below normal ground level connected to and including GI strip 25x4 mm as earth lead by means of bolts and nuts, check nuts and washers etc made of GI & connected to LT panel and earthing test point, earth dolly all as shown in elect plate No 3 of SSR Pt-I including all necessary earth work, excavation PCC chamber cover with handle (PCC 1:2:4) and 20mm dia GI watering pipe and 40 mm dia light grade GI for protection of earth strip ,wire mesh, funnel, charcoal dust & common salt, etc all as specified and directed( for External W/S and External E/M)

External Electric Supply: S&F LT cable path indicators of oval shaped size 200mmX150mmX6mm thick made of or moulded cast iron and emborsing LT UG cable and fixed on MS angle iron 25x25x5mm thick 40 cm in length with two nos nut, bolts and washers, including two coats of synthetic enamelled paint over a coat of zinc coat primer on exposed surface, angle iron to be fixed in to the ground including suitable PCC work, while returning and filling the excavated soil complete all as specified and as directed.

Supply, install, testing and commissioning of LT MCCB enclosure, AC 415V, 50 Hz, 3 Phase 4 wire of suitable size for accomodating 250 Amps 4 pole MCCB, totally enclosed self supporting cubicle with sloping canopy at top, weather proof, protection IP 54, suitable for outdoor use, with bottom cable entry with suitable cable glands, made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50 x 50 x 5 mm, with four legs grouted to PCC (1:2:4) type B1 foundation block, double hinged doors at front with suitable locking arrangement, provision of louvers at sides, duly powder coated after necessary pre-treatment including 4 pole MCCB of 250 Amps 36 KA with adjustable thermal and magnetic setting complete all as specified and directed.

Supply , install, testing and commissioning of LT Feeder pillar Box AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , weather proof , protection IP 54 , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter and MCCBs , with sloping canopy at top , double hinged doors at front and back with suitable locking arrangement , provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated with 400A electrical grade aluminium bus bar for phases and neutral complete with suitable digital type meters resin cast CTs ,manufactured from factory having type tested certificate, internal wiring all including the following incoming complete all as specified and directed

Supply, install, testing and commissioning of LT MCCB enclosure, AC 415V, 50 Hz, 3 Phase 4 wire of suitable size for accomodating up to 100 Amps 4 pole MCCB, totally enclosed self supporting type cubicle with sloping canopy at top, weather proof, protection IP 52, suitable for outdoor use, with bottom cable entry with suitable cable glands, made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50 x 50 x 5 mm, with four legs grouted to PCC (1:2:4) type B1 foundation block, double hinged doors at front with suitable locking arrangement, provision of louvers at sides, duly powder coated after necessary pre-treatment including 4 pole MCCB of 80 Amps 25 KA with adjustable thermal and magnetic setting complete all as specified and directed.

Supply, install, testing and commissioning of LT Feeder pillar Box AC 415V, 50 Hz, 3 Phase 4 wire of suitable size for accomodating the following accessories, totally enclosed self supporting structure / cubicle, fully compartmentalized type , weather proof , protection IP 54 , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick CRCA steel sheet with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter and MCCBs , with sloping canopy at top , double hinged doors at front and back with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated with 200A electrical grade aluminium bus bar for phases and neutral complete with suitable digital type meters resin cast CTs ,manufactured from factory having type tested certificat, internal wiring all including the following incoming complete all as specified and directed

Cutting the existing PCC/bituminous road of any description to a size not exc. 0.5m wide x 1.2m deep for crossing of pipe including refilling, ramming and making top 100mm thick surface good with plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate complete all as specified and directed.

Material and labour for interchanging of existing transformers of 250 KVA and 200 KVA between PH No 2 substation and 1000 Trainess substation by disconnecting all connections and transporting carefully to the new location and refixing the same in on the existing platform and connecting both HT & LT electrical cable and earthing strips complete all as directed by Engr in charge.

Taking up old un-reinforced precast concrete cable cover from trenches and relaying in trenches for cable protection

Taking up including relaying of old serviceable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) with aluminium conductor, 11000 Volts grade with stranded aluminium conductor of size 95 sq mm 3 core.

Building Work:M&L for Garbage bin pole mounted Nilkamal waste bins model No RFLB 50 L2 mounted on dual side MS steel structure all as specified and directed by Engr-in-Charge

Rain Water Harvesting: S & F nylon mesh of size 2mmx1mm all as directed by Eng-In-charge

Development of trial bore well of 200 mm dia up to 30m depth below ground level in any kind of soil strata including hard stone/boulder including electric logging MS cap MS flat iron clamps,reducing socket etc (3 bore wells 30x3 as required for each bore well) all as directed by Eng-In-charge.

M&L for UPVC(SCH-80) pipe 200 mm dia bore in any length laid in trench/bore well and all jointed all as specified and as directed

M&L for perforated UPVC(SCH-80) pipe 200 mm dia bore in any length laid in trench/bore well and all jointed all as specified and as directed

Internal Water Supply: S&F 15mm bore health faucet cast copper alloy chromium plated including necessary fittings complete all as specified and as directed.

S&F 15mm bore angle cock cast copper alloy fancy type chromium plated for PP-R pipe, complete all as specified and as directed.

S&F 15mm bore two way bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for galvanised iron pipe, complete all as specified and as directed.

Hariom Projects Pvt Ltd

M/s Madan Lal Bansal and Co. Contractors Pvt. Ltd.

SHRI GURMUKHDAS CONTRACTORS PVT. LTD.

DES RAJ AND SONS BUILDERS PVT LTD

Som Projects Pvt. Ltd.

City Promoter and Buildwell Pvt. Ltd.

RAGHUSONS INFRA ENGINEERING PVT. LTD