Construction of Anganwadi building at kamachi Nagar Sethur in Thirunallar Commune

Amount

Code No.2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Code No.2.27 Supplying and filling in plinth with river sand under floors including, watering, ramming consolidating and dressing complete.

Code No. 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size)

Code No. 6.1.2 Brick work with common burnt clay FPS non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

Code No.5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement -All work upto plinth 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No.5.2.3 Reinforced cement concrete work in walls (any thickness), including attached pilasters , buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering, finishing and reinforcement:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No.5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level xcluding the cost of centering, shuttering,finishing and reinforcement with 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Code No.5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

Code No.5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts.

Code No.5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beam, plinth beams, girders, bressumers and cantilevers.

Code No.5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for : uspended floors, roofs, landings , balconies and access platform

Code No.5.22.6 Steel Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars TISCON / VIZAG / IISCO / SAIL / JSW Fe415 or more

Code No.6.4.2 Brickwork with common burnt clay FPS (non modular) bricks of class designation 7.50 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Code No 6.12.2 Half brick masonry with common burnt clay FPS ( non modular)bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Code No 5.12 Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing but excluding cost of reinforcement with 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size

Code No.9.1.2P Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position - with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Padak wood

Code No.9.5.1.1P Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, - Padak wood - 35mm thick shutters.

Code No.9.7.1P Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 5mm to 40mm thick: Padak wood

Code No.9.53 Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No. 9.48.2 Providing and fixing M.S.grills of required pattern in frames of windows etc. with M.S.flats , square or round bars etc including priming coat with approved steel primer all complete - Fixed to steel windows by welding

Code No 10.17 Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S. bar, bent to shape with hooked ends in R.C.C.slabs or beams during laying , including painting the exposed portion of loop, all as per standard design complete

Code No.9.97.1 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 300x10mm

Code No 9.97.4 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : -150x10mm

Code No.14.35.2 Providing and fixing bright finished brass hard drawn hooks and eyes - 250 mm

Code No.9.100.2 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-100mm

Code No 9.96.1Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 X 16 mm

Code No 9.165.1A Providing and fixing of 65mm Godrej Navtal lock of 6 levers etc complete

Code No.11.37.2 Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specified by the manufacture) of commercial quality conforming to IS : 15622 of approved make Bell / Johnson / Regency / Somany / Naveen / Asian ) in colours such as white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete

Code No 11.36.A Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the anufacture of approved make (Jhonson / Asian / omany / Nitco) in all colours, shades of size 200x300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement with pigment of matching shade complete. - size 200x300mm

Code No.12.15.1 Painting top of roofs with bitumen of approved quality at 17kg per 10sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly oaked in kerosene oil complete: With residual type petroleum bitumen of grade VG -10

Code No.12.20 Providing and laying pressed clay tiles (as per approved pattern 20mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse and) mixed with 2% intergral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Code No.13.1.2 12mm cement plaster of mix :Cement mortar 1:6 (1 cement: 6 fine sand)

Code No.13.2.2 15 mm cement plaster on rough side of single or half brick wall of mix - cement mortar 1:6 (1 cement : 6 fine sand)

Code No.13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

Code No 13.37.1 White washing with lime to give an even shade - new work (three or more coats)

Code No.13.44.1 Finishing walls with water proofing cement paint of required shade - New work. (Two or more coats applied @ 3.84 kg/10 sqm)

Code No.13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.

Code No. 13.50.1 Applying priming coat - with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Code No.13.50.3 Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Code No.17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm.

Code No.31.160.1A Providing, laying and jointing UPVC pipes(Finolex /Jain / Supreme / Truebore /Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 20mm dia.

Code No.31.160.1B Providing, laying and jointing UPVC pipes(Finolex /Jain / Supreme / Truebore /Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends, tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 25mm dia.

Code No.18.17.1 Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end)- 25mm nominal bore)

Code No.18.15.1 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore.

Code No.12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

Code No.12.42.5.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal xpansion. Bend 87.5deg. 110mm bend.

Code No.19.32.1A Making soak pit 2.5 m diameter 3 m deep with 45 x 45 cm dry table moulded brick honeycomb shaft with bricks of class designation 35 and SW drain pipe 100 mm diameter 1.8 m long complete as per standard design with F.P.S bricks.

Code No.17.35.2.1 Providing and fixing soil,waste and vent pipes - 75mm dia - sand cast iron S&S pipe as per IS: 1729

Code No.17.35.2.1 Supplying fixing and commisioning of Suguna/ Texmo /Sharp 1 HP monoblock umpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete .

Code No.18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. circular tank

Code No.17.7.3 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32mm C.P.brass waste of standard pattern ,including painting of fittings and brackets ,cutting and making good the walls wherever required - white Vitreous China wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps

Code No.18.18.2 Providing and fixing ball valve (brass) of approved quality , high or low pressure , with plastic floats complete - 20mm nominal bore

Code No.1.1.1.1 supplying and fixing of following size of PVC conduit along with the accessories in surface / recess conduit including cutting the wall and making good the same in case of recessed conduit as required. Make: Avonplast / Vijaya:- 20mm dia.

Code No.1.1.1.2 supplying and fixing of following size of PVC conduit along with the accessories in surface / recess conduit including cutting the wall and making good the same in case of recessed conduit as required. Make: Avonplast / Vijaya:- 25mm dia.

Code No 1.1.2.1 Supplying and laying of following size of PVC conduit in roof slab along with the accessories Make : Avonplast/Vijaya 20mm dia.

Code No 1.1.2.2 Supplying and laying of following size of PVC conduit in roof slab along with the accessories Make : Avonplast/Vijaya 25mm dia.

Code No 1.1.3.1.3 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required . Avonplast/Vijaya – 20mm junction box three way

Code No 1.1.3.2.2 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required . Avonplast/Vijaya – 25mm junction box two way.

Code No 1.1.3.4.3 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required . Avonplast/Vijaya – 25mm junction box three way.

Code No 1.3.8 Supplying and fixing of following size of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required – 250mmx200mmx50mm deep.

Code No 1.3.12 Supplying and fixing of following size of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required – 300mmx250mmx50mm deep

Code No. 1.5.1 Supplying and drawing of 1.5 sqmm FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC / steel conduit/PVC casing and capping as required. Make : finolex/ Polycap.

No 1.5.2 Supplying and drawing of 2.5 sqmm FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC / steel conduit/PVC casing and capping as required. Make : finolex/ Polycap.

Code No 1.5.3 Supplying and drawing of 4.0 sqmm FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC / steel conduit/PVC casing and capping as required. Make : finolex/ Polycap.

Code No 1.6.8 Providing and fixing of following size phenolic coated sheet on existing wooden board 250mmx200mmx3mm thick.

Code No 1.6.12 Providing and fixing of following size phenolic coated sheet on existing wooden board 300mmx250mmx3mm thick

Code No 1.7.1.1 Supplying and fixing S.P.I 2 way 5/6 amps piano/flush type switch on the existing switch box/ cover including connection etc as required Make : an/Anchor/Vinay

Code No 1.7.1.4 Supplying and fixing S.P.I 1 way 15/16 amps piano/flush type switch on the existing switch box/ cover including connection etc as required Make : Kundan/Anchor/Vinay

Code No 1.7.1.6 Supplying and fixing 3 pin 15/16 amps piano/flush type switch on the existing switch box/ cover including connection etc as required Make : Kundan/Anchor/Vinay

Code No 1.7.1.10 Supplying and fixing 16 amps Kit kat fuse on the existing switch box/cover including connection etc as required Make: kundan/Anchor / Vinay

Code No 1.7.1.14 Supplying and fixing Electronic Dimmer 400 W socket type on the existing switch box/cover including connection etc as required Make: kundan/Anchor / Vinay.

Code No 1.7.2.1 Supplying and fixing 3 plate, 5 amps ceiling rose on the existing switch box/cover including connection etc as required Make: kundan/Anchor/ Vinay

Code No 1.7.2.2 Supplying and fixing jumbo type battern/ angle bolder including connections etc as required Make: kundan/Anchor/ Vinay.

Code No 1.7.3.16A Supplying and fixing 20A single phase DP main switch with keycard switch on the existing modular plate and switch box including connection but excluding modular plate as required make : MK

Code No 2.1.1 supplying and fixing following way single pole and neutral sheet steel, MCB distribution board, 240 volts on surface / recess complete with tinned copper bushbar, neutral busbar, earth bar, din bar, detachable glad plate, interconnections, phosphatized and powered painted including earthing etc, as required : (but without/RCCB/Isolatory) make : Siemens/ARB/L&T Hager, 4 way – SPN double door, MCB DB.

Code No 3051 1x40W box type single tube light fittings with copper choke and starter without tube Make Philips / Bajaj.

Code No 3079 60W incandescent bulb, make: Philips / Bajaj.

Code No. 3081 Bulk Head fittings aluminium alloy body heat resistant prismatic glass cover with specially designed gasket (GLS 100W type) Make : Philips / Bajaj.

Code No 3.1 Earthing with G.I medium pipe 3.00 long and 40mm dia including accessories 250x50x6mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required.

M.ARUMUGAM