Providing LWSS to Chomo Gompa village Kewang in GP Kaza in Tehsil Kaza Distt LS HP

Amount

Excavation in foundation and trenches etc. in earth work in all kind of soil such as pick work jumper work,saturated soil including bailing or pumping out water, blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting,timbering and dewatering where ever required as per direction of the Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1cement:6 sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth.

Providing and laying cement concrete 1:4:8 (1cement:4 sand:8graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth.

Random rubble masnory/ polygonal rubble masonry(uncoursed/brought to courses)with hard stone of apporved quailty in foundation &plinth including levelling up with cement concrete 1:6:12(1Cement :6 sand :12greded stone aggregate) in CM 1:6.

Providing & laying Boulder filling under floor.

Half brick masonry in common butnt clay building bricks in cement mortar 1:4 (1 cement 4 sand) 2nd class bricks

Brick work using common brunt clay building bricks in super structure in cement mortor 1:6 (1 cement:6 sand ) in all leads and lifts (2nd class bricks)

Providing form work of steel plate 3.15mm thick planking so as to give a rough finish including shuttering, centring, shuttering and propping hight of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete and plain concrete work in lintels, beams etc. including all leads and lifts in:-

Beams , cantilivers , girders and lintels sides and soffits of beams ,beam hunchings , cantilivers girders , bressumers and lintels not exceeding 1 metre in depth.

Flat surface such as soffits of suspended floors, roofs, leadings the like floors etc. 200mm in thickness..

Edges of slabe and breaks in floors & walls under 20 cm. wide.

in vetical surfaces such as wall ( any thickness) partitions and like including attached pillasters. Buttress , plinth and string courses and like.

Providing and laying cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size ) and curing excluding cost of form work and reinforcement for reinforced concrete work in suspended floor,roofs, landings,shelves and their supports balconies, beams,girders, bressumers and centilevers upto floor two level.

Providing and placing tor steel in all RCC work including bending,binding in position complete upto floor two level.

S/R masonery coursed with hard stone of approved quality in foundation and plinth including racking out joints. In C.M. 1:6

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jumb lock jamb, beed and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1,25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5 mm thick with gaurds, lock strike plate and shock as specified and applying a coat of approved steel primer after pretreatment of the suriace as directed by Engineer-in-charge.

Providing and fixing panneled glazed or panneled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 45 mm thick 2nd class deodar wood.

Providing & fixing M.S. grils of required pattern in wooden frame of window etc. with M.S. flats square or round barswith round headedbolts and nuts by screws plan grils.

40mm thick cement Concrete Flooring 1:2:4( 1Cement 2 Sand 4 Aggrigate 20 mm size)

15 mm cement plaster in single coat on rough side of brick/ manory stone masonry, concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chambers and or rounded angles not exceeding 80mm in girth and finsihed even and smooth in cement mortor 1:6 (1cement:6sand).

Flushing pointing on brick work with cement mortor 1:3 (1cement :3sand).

White washing with lime on un-decorated wall surfaces (with two coats) to give an even shade including thoroughty brooming the surface to remove all dirt,dust,mortor dirt and other foreign matter.

6mm cement plaster to ceiling in cement mortar 1:3 (1cement:3sand).

Distempering with dry distemper of approved brand and manufacture ( two coats ) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.

Applying priming on new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dust and other foreign matter, sand preparing and knotting. Ready mixed paint brushing wood primer pink.

Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give even shade including cleaning the surface of dust and other foreign matter, sand preparing and stopping with enamel paint other than white.

Providing and fixing 300x16mm mild steel sliding door, bolts.

Providing and fixing anodised M.S. Tower bolts (Barrel type) with necessary screws etc.complete .

Providing and fixing Oxidized M S Handel with necessary srews Etc complete. 125 mm

Providing and fixing Oxidized M S Handel with necessary srews Etc complete. 100 mm

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) well remmed and consolidated and grouted with fine sand including preparation of ground.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work andre-inforcement for reinforced concrete work in:-

in wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. fromtop of foundation level upto floor two level.

in foundation footing etc.

suspended floor,roofs, landings,shelves and their supports balconies, beams,girders, bressumers and centilevers upto floor two level.

G.I pipe (light grade), tube fitting in trenches i/c earth work complete :-

Inlet pipe -25 mm

Outlet pipe -25 mm

ccour pipe -65 mm

Providing 200 mm wide cast rungs with chequered of ribbed non slip surface including fixing in manhole with 200x200x100 mm cement concrete 1;2;6 (1cement:3sand:6graded stone aggregate 20mm nominal size)

P/F C.I ventilating pipe 100 mm dia ,1 mtrs high with C.I cowl fixed at top

P/F brass full way wheel value with wheel of following size

25 mm nomonal size

25 mm nomonal size

65 mm nomonal size

Providing and fixing 1.80 m high barbed wire fencing with angle iron post 2.50m C.C with 9 horizental row and 2 diagonal rows of barbed wire embended in C.C 1:4:8

Steel work in built up section , truses & framed work i/c cutting hoisting fixing in position & applying of priming coat of red paint In R.S joist , chhannels, angles and tees (MR)

Manufacturing and fixing of fencing panel of size 1.20x1.20 mtrs of all (Expanded metal) 25x25 mm welded to M.S black tube 32 mm dia of 14 gauge mm with M.S >25x25 mm including cutting welding andpainting with red oxide paint cpmplete in al repect including all leads and lifts to the entire satisfaction of Engineer-in-charge.

Manufacturing and fixing of MS gate of 90 kg including cutting welding and painting with red oxide paint complete in all respect including all leads and lifts to the entire satisfaction of Engineer-in-charge.

P/F MS Manhole cover with locking arrangement i/c MS sliding door bolts , MS handle, MS hings with nuts and bolts i/c washer and making hole for grouting and manhole cover with C.C 1:2:4 with one No lock complete.

Supplying and fixing of cast iron manhole cover with frame455x610 mm rectangular C.I cover (light duty) single seal pattren the weight of cover 32 kg and weight 15 kg the total of cover and frame to be not less than 38 kg complete.

white glazed tiles 6 mm thick in flooring cement mortar 1:3 (1 cement:3 sang and finished with flush pointing in white cement

white glazed tiles 6 mm thick in skiting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement:3 sang andjoint with cement slurry

Providing and fixing autimatic flusing cistern with a pair of CI or MS bracket complete with fitting including CI syphonic apprature masquits proof lid CP brass unions and coupling for connectinh with inlet outlet and over flow pipes including cutting holes and makng food the same over flow pipe to be measured and paid for seperately 9viterous china 5 litrs capacity

providing and fixing vitreius china wash down water closet Iindian type W.C pan) with integral P or S trap including jointing the trap with soil pipe in cement morter 1;1 (1 cement:1 sand) (seat and cover to be measured and paid for sparately (white colour)

providing and fixing 100 mm size P or S trap for water closet (squatting Pan including jointing the trap with soil pipe in cement morter 1;1 (1 cement:1 sand) sand cast iron

providing and fixing vitreius china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting cera sanitary work (carnet) white 550x400 white

Providing and fixing vitreius china padestral for wash basin complete recesses at th basic for reception pf pipe and fitting cera sanitary work (carnet white (viteiuos in white colour)

providing and fixing of water srorage tank sintex having capacity 500 ltrs with necessary fittings including over flow pipes, scour pipes etc. inlet or outlet and inside paint of required size for intel or outlet and inside paint of aprroved quality complete including hoisting complete in all respect

Providing and fixing on wall face PVC ( D_PLAST rain water pipes of working pressure not less 4.5 kg/sqm inclusing fitting the joints with approved adhesive complete with in all leasd and lifts and crriage of materia 110 mm nominal bore

providing and fixing on wall face PVC door bend ( D_PLAST) with over access door insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including fixing with approved approved adhesive complete 75mm nominal bore

Providing and fixing to wall ceiling and floor galvanised mild steel tubs (medium grade) tube fitting and clamp including making good the wall ceiling and floor in all leads and lifts) 15mm nominal bore

providing and fixing full way wheel valve 15 mm dia gun metel

providing and fixing C.I cowl 100 mm dia

Providing and fixing brass bib tap. 15mm.

Providing and fixing C.P. Soap dish

Wiring for circuit /sub-main with following sixe PVC insulated heat resistant flame retardent (HRFR) and low soke single core (flexibleocopper conductor cable in surface .resessed single core copper conductor cable of same size for earthing as rquired

Wiring for light piont/fan/point/exhaust fan/ call bell point with 1.5 sq m PVC insulated heat resistant flame retarant (HRFR)and low smoke surface /recessed single core copper conductor cable as required.

2x1.50 sq mm

2x2.50 sq mm

Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/cover including connections etc. as required .

Supplying and fixing 3 pin 5/6 amps.Tumber as /piano type switch on the exisiting box the switch box /cover including connections etc.as required

Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/cover including connections etc. as required .Tumber as /piano type switch on the exisiting box the switch box /cover including connections etc.as required

Supplying and fixing 3 pin 15/16 amps. .Tumber as /piano type switch on the exisiting box the switch box /cover including connections etc.as required

Supplying and fixing wooden box of following size nominal on surface or recesswith suitable size of phenolic lamination sheet cover of in front as required

229mmx102mmx60mm deep

203mmx152mmx60mm deep

Providing and Supplying of CFL1x23 watt of reputed make in all leads and lifts

Providing and Supplying of CFL1x5 watt of reputed make in all leads and lifts

Supplying and fixing 5 AMP to 32 AMPs rating 240 volts L series miniature circuit breaker of following poles in the existing in the exist MCBDB complete with connections , testing and commissioning etc. as rewuired Cat-a (ingle pole)

GATUK CHHERING

M/S TASHI DOLKAR CONTR4ACTOR