Tender ID

Karnataka

Retender

Works

Roads

Improvements to MDR road from Kolliganhalli to join Hejjala-Dodderi Via Bidadi Bannikuppe in Bidadi Hobli,RamanagaraTaluk. Ch 9.50-10.70Km

Public Works Department

PWD Division Office Ramanagara | Karnataka

Amount: ₹80.0 LCloses: 11 Mar 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published25 Feb 2025
Closed11 Mar 2025
Retendered25 Feb 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 25 Feb 2025

Tender Value

₹80.0 L

EMD Value

₹79,998

Closing Date

11 Mar 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Shankar K H

Office Number

Work Description

Improvements to MDR road from Kolliganhalli to join Hejjala-Dodderi Via Bidadi Bannikuppe in Bidadi Hobli, RamanagaraTaluk. Ch 9.50-10.70Km

Tender Information

Tender ID

PWD/2024-25/RD/WORK_INDENT18463/CALL-2

Reference Number

PWD/2024-25/RD/WORK_INDENT18463/CALL-2

Tender Type

Reserved

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Ramanagara

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredContractors should be registered as KPWD Class III & above Civil Contractor

RequiredReserved Category Certificate

RequiredWork Done certificate

RequiredLine of Credit

RequiredAs per KW-3 Bid Document

RequiredDomicile Certificate

RequiredBid Capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tender shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those cost. The employer is not responsible for any delay in accessing kppp - Portal.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

Materials like bitumen,steel,cement etc.,required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the original documents before approval.

If any, additional information required, the same may be obtained from the office of the Executive Engineer, PWD,Ramanagara Division, Ramanagara during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday , the next working day will be considered

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The Tender processing fee shall not be refundable.

Tender who qualifying in the technical bid such tender financial bid will be opened

All the work as Maintained in the Bill of Quantity (BOQ) are including lead and lift charges loading and unloading charges labor charges all incidental charges hire charges of all machinery and equipment required for successful completion of work etc., complete. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work

Conditional bids will be rejected

GST shall be paid separately

Increase in GST shall not be paid in the extended period at contract for which the contractor alone is responsible for delay as determined by authority while granting is extension of time

Contractors should be registered as KPWD Class III & above Civil Contractor

Units against to the item code to be considered as per universal SOR 2023-24 volume 1,2,3

The unit of clearing & grubbing item code 2.5ii(a) to be considered as 100 sqm

For item code description, please refer universal Schedule of rates for the year 2023-24 volume 1,2,3. The descriptions in the SR are final

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-3

Contractor should follow strictly the prevailing rules of labour act. Quality Management System(QMS) and Environmental Management System(EMS) shall be implemented and followed in site according to ISO 9001:2015 and ISO 14001:2015

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/2A/CAT-1 other reserved category as prescribed in the tender document.

Bidders should be a domicile of Karnataka for not less than 10 years prior to the last date of submission of tenders and shall ensure upload of relevant valid document certifying his/her domicile status issued by the competent authority. Failure to upload the Domicile certificate Will lead to rejection of TENDER.

The defect liability period for this project shall be total 1 Year

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract or Security deposit for an amount equivalent to 5% the contract price payable shall be deducted in every running bill, However, in case of first and final bill the entire Security deposit will be deducted from the final bill

Contractor should follow strictly the prevailing rules of labour act.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should execute the project with least impact to the environment especially during earthwork, laying of GSB, bituminous surface etc.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Technical Criteria

Past Experience

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2019-20 to 2023-24)(b) Mandating satisfactory completion(atleast 90% of the contract value) as a prime contractor for at least any construction work to an extent of 25% of the cost of the work of value not less than Rs.19.99 Lakhs

Satisfactory Performance Certificate

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2019-20 to 2023-24)(c)Executed in any one year,the following minimum quantities of work1)Earth work /embankment/subgrade -1421.50 m3 2)WMM/WBM -319.68 m3 3) GSB -204.75 m3 4)DBM/BC/BM/SDBC-225.50 m3 5)RCC/PCC -20.25 m3 6)Steel-0.75 t

Work Done Certificate

Capabilities of Vendor

Liquid assets and /or availability of credit facilities of no less than Rs 23.99 Lakhs (Credit lines/ letter of credit/ certificates from nationalized/scheduled banks for meeting the fund requirement etc)

Line of Credit

Assessed available tender capacity - (AxNx5.0-B)

Others -- Bid capacity

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2019-20 to 2023-24) (a) Achieved in at least one financial years a Minimum financial turn over (in all classes of civil engineering construction works only) of Rs. 79.99 Lakhs.

Audited CA Certificate of Annual Turnover

Others

Contractors should be registered as KPWD Class III & above Civil Contractor

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹2,000

EMD Fee Amount

₹79,998

Important Dates

Last Activity

25 Feb 2025

Published

25 Feb 2025

Bid Opening

12 Mar 2025

Download Ends

3 Mar 2025

BOQ Preview

•

Improvements to MDR road from Kolliganhalli to Bidadi Bannikuppe Via Hejjala-Dodderi in Bidadi Hobli,RamanagaraTaluk. Ch 9.50-10.70Km

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer ston...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Randomization.pdf

Others - Randomization • 0.03 MB

kw 3 18463.doc

Tender Document • 0.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Roads

Improvements to MDR road from Kolliganhalli to join Hejjala-Dodderi Via Bidadi Bannikuppe in Bidadi Hobli,RamanagaraTaluk. Ch 9.50-10.70Km

Public Works Department

PWD Division Office Ramanagara | Karnataka

Amount: ₹80.0 LCloses: 11 Mar 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published25 Feb 2025
Closed11 Mar 2025
Retendered25 Feb 2025