Construction of Community Centre Cum Parking at Tutikandi (Balance work)

Amount

6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand)

15 mm cement plaster in single coat on fair side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand)

15 mm cement plaster in single coat on Rough side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing vitreous china squatting plate pattern urinal of size 450 x 350 mm with intergral flush pipe

Providing and fixing P.V.C. Waste pipe for sink and washbasin i/c P.V.C. Waste fitting complete and 32mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing CP Brass towel rail complete with CP brass bracket fixed to wooden plug with CP Brass Chrome plate

Providing and fixing CP brass soap dish with CP brass bracket fixed to wooden cleats with brass screws chrome plate

Providing and fixing plastic seat (Solid and hollow type) cover for wash down water closet with CP brass hinges and rubber buffers white plastic seat and cover

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing vitreous china wash basin With single hole for pillar tap with C.I or M.S brackets painted white including cutting holes and making good the same but excluding fitting

Providing and fixing to wall celling and floor galvanised mild steel tubes ( medium grade) tube fitting and clamps including making good the wall celling and floor (15 mm nominal bore)

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 0.60 mm thick prepained steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 mircons over 5 mircons primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 275 gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class D wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class D wood 40 mm thick shutters

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

40 mm thick cement concrete flooring 1:2:4 (one cement:2sand:4graded stone 20mm size) laid in one layer finished with a floting coat of neat cement.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x2 m size with top and bottom rail of T-iron 40x40x6 mm with 40 mm dia steel pulley complete with bolts nuts locking arrangement stppers handles including applying a priming coat of approved steel prime

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing and fixing PVC water storage tank syntax or equivalent three layer cost of connecting / tank nipples , making connection etc. 1000 litres capacity including all assecories.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm

Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm

Providing and fixing aluminium handles hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 As Per is 1868) transparent or dyed to required colour and shade with necessary screws etc complete single rubber stooper

Providing and fixing M.S. Telescope channel with necessary secrews

Providing and fixing bright finished brass 100 mm mortice latcg and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 As Per is 1868) aluminium lever handles of approved quality with necessary screws etc complete

Providing & fixing wire gauze shutters using galvanised M.S Wire gauge of average width aperature 1.4 mm in both direction with wire of 0.63 mm dia for door window and clerestory windows with hinges and necessary screw 2nd Class Deodar wood

Kota stone slabs flooring over 25 mm thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete with base of cement motar 1:4 ( Cement :4 sand )

Providing and fixing 25 mm thick shutters for cup board etc panelled or panelled and glazed shutters

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 18 mm thick

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I Pipe

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing CP brass stop cock of standard design and of approved quality (15mm nominal size)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore

Providing and fixing CP brass long body bib cock of approved quality conforming to IS standards and weight not less than 690gms 15 mm dia nominal bore

Providing and fixing CP Bras angle valve for basin mixer and geyer points of approved quality conforming to IS 8931 15 mm dia nominal bore

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

P/F C.P. Brass Angle cock 15mm dia (heavy duty)

Constructing manhole with R.C.C top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement :4 sand :8 graded stone aggregate 40mm nominaLl size), inside plastering 15mm thick with cement mortar 1:3( 1 cement :3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement :2 sand :4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing : with 200mm thick walls of brick masonary of approved quality in cement mortar 1:3 ( 1 cement :3 Sand)

Providing and fixing CI Mainhole Cover 500mm dia (standard size)

Providing and fixing PTMT extension nipple for water tank pipe fitting of approved quality and colour 50 mm

Providing and fixing PVC pipes 100 mm dia (Heavy duty)

Providing and fixing PVC pipes 75 mm dia (Heavy duty)

P/F PVC Plain Bend 100 mm (Heavy duty)

P/F PVC Floor trap 100 mm dia (Heavy duty)

P/F PVC Collar 100 mm (Heavy duty)

P/F PVC Single Equal branch 100 mm (Heavy duty)

P/F P.V.C. P or S trap of 100mm dia of approved quality

P/F P.V.C. Door bend 100 mm dia (Heavy duty)

P/F P.V.C. Plain Bend 75 mm dia (Heavy duty)

P/F P.V.C. floor trap 75 mm dia (Heavy duty)

P/F P.V.C Collar 75 mm dia (Heavy duty)

P/F P.V.C Single Equal branch 75 mm (Heavy duty)

P/F P.V.C Cowl 75 mm (Heavy duty)

P/F P.V.C. P or S trap of 75 mm dia of approved quality

P/F G.I / M.I union (15 mm nominal bore)

Providing and fixing C.P stainless grating with hole (100 mm dia)

Providing and fixing toilet paper holder (stainless steel standard size)

Providing and fixing CP grating 75 mm dia (stainless steel)

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 4.0 mm thick glass panes

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

MADAN SINGH

VIKRAM PRASAD