Loading
Loading…
Loading…
Tender Value
₹60.3 L
EMD Value
₹1.2 L
Closing Date
19 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
TENDER
16 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less ;where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Similar works for the above tender shall be: - Supply, installation, testing & commissioning of any LT/HT Electrical work.
However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletter, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
48 conditions · 6 needing a document upload
Valid copy of PAN and GSTIN needs to be furnished along with the documents.
Tenderer should fill up the Tender Form (First Sheet) as per 'Annexure-I' of GCC. Incomplete or partial fill up the Tender Form (First Sheet) by the Tenderer will be liable to reject.
For Sole Proprietorship firm a)Affidavit as per 'Annexure'. b)Special power of Attorney as per proforma given in 'Annexure' to be submitted by sole proprietor firm duly notarized.(Not required if tender documents are submitted by proprietor himself) (Mandatory)
For Partnership firm a)Self/Notary attested copies of Partnership deed.b)Special Power of Attorney as per proforma given in 'Annexure' to be submitted by Partnership firm. (Not required if one or more partners are authorized in Parternership deed to sign on behalf of the firm.)
For Limited Company a) Copy of Memorandum & Articles of Association of Company. b)Self /Notary attested copy of resolution passed by Board of Directors authorizing its Director/Employee to deal with tender on behalf of company. c) Attested copy of Notarized Special Power of Attorney including ratification clause duly signed by person authorized by the company.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer is advised to study the uploaded tender document in www.ireps.gov.in portal carefully
The Conditions of tender shall be read in conjunction with General Condition of Contract/2022 subject to modification, additions or supersessions by Special Condition of Contract and Specification if any.
The tenderers are required to observe the website to find out if any correction slips issued subsequent to uploading of the Tender. Railway reserves the right to make any additions/alterations to the tender uploaded and issue corrigendum to the same effect. In case the tenderer fails to take note of the above corrigendum, the additions and alterations entered/effected in the corrigendum shall be binding upon the tenderer and no claim whatsoever will be entertained by Railway.
No manual tenders sent by post/Fax/courier or in person shall be accepted.
No post tender correspondence shall be entertained after closing of tender even suo moto post tender letters of the tenderers shall be treated as null void
Indian Railway Standard General Condition of contract- 2022 corrected up to date of closing of tender and the attached documents are part of the tender document
Electrical works in connection with provision of new 45 bed Running Room near to existing 12 bed Running Room at AYU station.
RNY-EL-T-18-2025-26-RT~NFR
RNY-EL-T-18-2025-26-RT
Open
Works - General
180 Days
Kamrup, Assam
₹0
₹1.2 L
19 Jan 2026
23 Dec 2025
5 Jan 2026
73 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 60,32,952.33 | ||
| — | 120.00 | — | — | ||
| Supply and wiring of concealed light/FL point by PVC insulated & un-sheathed FRLS multi stranded copper single core 1.5 sq.mm cable through suitable size PVC heavy guage pipe including ceiling rose. Cable connection to be done through modular controlling switch installed in concealed board having unbreakable modular box, cover plate and including all accessories as per direction of EIC at site. | — | — | — | 27,278.4 | |
| — | 80.00 | — | — | ||
| Supply and wiring of concealed ceiling fan/ wall bracket fan/ exhaust fan/Wall fan point by PVC insulated & un-sheathed FRLS multi stranded copper single core 1.5 sq.mm cable through PVC heavy guage pipe including ceiling rose. Cable connection to be done through modular controlling switch installed in concealed board having unbreakable modular box, cover plate with earth continuity by 1.0 sq.mm multistrand copper cable & connected by twin core copper flexible wire as per direction of EIC at site. | — | — | — | 36,518.4 | |
| — | 60.00 | — | — | ||
| Supply and wiring of concealed 6A 5 pin plug point/computer point full/mobile charging point by PVC insulated and un-sheathed FRLS multi stranded copper cable, single core 2.5 sq.mm with earth continuity by single core 1.0 sq mm copper cable through PVC heavy guage pipe. Cable connection to be done through modular controlling switch, socket installed in board having unbreakable modular box, cover plate and all accessories as per direction of EIC at site. | — | — | — | 23,583 | |
| — | 30.00 | — | — | ||
| Supply and wiring of concealed 16A Plug point/Geyser point by PVC insulated and un- sheathed FRLS multi stranded copper cable, single core 4.0 sq.mm through PVC heavy guage pipe with earth continuity by 1.0 sq.mm multistand copper cable. Cable connection to be done through modular controlling switch, socket installed in board having unbreakable modular box, cover plate and all accessories as per direction of EIC at site. | — | — | — | 12,274.2 | |
| — | 25.00 | — | — | ||
| Supply and wiring of concealed AC point by PVC insulated and un-sheathed FRLS multi stranded copper cable, single core 4.0 sq.mm through PVC heavy guage pipe with earth continuity by 1.0 sq.mm multistand copper cable. Cable connection to be done through modular controlling switch, socket, 25A power unit installed in board having unbreakable modular box, cover plate and all accessories as per direction of EIC at site. | — | — | — | 21,076.75 | |
| — | 2200.00 | — | — | ||
| Supply & concealed wiring of earth continuity through the Main line/ Submain line circuit by 1.0 sq mm PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through consealed PVC heavy gayge pipe as required as per direction of EIC at site. - 1.0 sq.mm. | — | — | — | 22,682 | |
| — | 1800.00 | — | — | ||
| Supply & concealed wiring of Sub-main line by 2.0 sq mm PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through consealed PVC heavy gayge pipe as required as per direction of EIC at site. - 2.5 sq.mm | — | — | — | 45,162 | |
| — | 1500.00 | — | — | ||
| Supply & concealed wiring of Main line/ Submain line by 4.0 sq mm PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through consealed PVC heavy gayge pipe as required as per direction of EIC at site. - 4.0 sq.mm | — | — | — | 57,075 | |
| — | 800.00 | — | — | ||
| Supply & concealed wiring of Main line line by 6.0 sq mm PVC insulated & unsheathed, single core, multi stranded FRLS copper conductor cable through consealed PVC heavy gayge pipe as required as per direction of EIC at site. - 6.0 sq.mm | — | — | — | 45,424 | |
| — | 1300.00 | — | — | ||
| Supply & fixing of PVC heavy gauge pipe 25mm by concealing of wall for drawing of Main line/ Submain line as required as per direction of EIC at site. - PVC heavy gauge pipe 25mm | — | — | — | 66,209 | |
| — | 4.00 | — | — | ||
| Supply, concealed wiring & commissioning of call bell point to be drawn by single core FRLS PVC insulated & unsheated 1.5 sq.mm.stranded copper cable through suitable size PVC pipe to be fixed on wall/ceiling by suitable arrangement including modular bell push button switch and city ding dong sound door bell on on concealed unbreakable modular box, cover plate etc as per direction of EIC at site. | — | — | — | 1,819.8 | |
| — | 60.00 | — | — | ||
| Fixing and commissioning of ceiling fan 1200 mm sweep with suitable size GI pipe, MS hook, clamp, nut & bolts arrangements as required as per direction of EIC at site (Ceiling fan will be supplied by Railway ) | — | — | — | 2,141.4 | |
| — | 10.00 | — | — | ||
| Supply, testing and fixing of 300 mm sweep exhaust fan complete by cutting wall, masonary work as required and fixing by suitable nuts and bolts arrangement as per direction of EIC at site. Make Similar to Model No - Trans Air 12", Grey of Make - Crompton or Similar Model of Polar/Orient/Usha/Bajaj etc. | — | — | — | 18,398 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing and commissioning of 400 mm sweep, heavy duty wall fan complete as required and fixing by suitable nuts and bolts arrangement through switch as per direction of EIC at site. Make similar to -Crompton Greaves Model- WM High Speed or Similar Model of Polar/Orient/Usha/Bajaj etc. | — | — | — | 14,322.8 | |
| — | 5.00 | — | — | ||
| Supply, installation, testing & commissioning of SPN distribution board 8 way double door metal SPN DB (Cat Reference - CSDBSPNPEDD08,Make -C&S or Similar model of Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) consisting 40A, MCB DP (Cat No. - CSMBS2C40, Make - C&S or Similar model of Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) - 1 no, 20A, MCB DP (Cat No. - CSMBS2C20, Make - C&S or Similar model of Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) - 2 nos, 6A, MCB SP (Cat No. - CSMBS1C6, Make -C&S or Similar model of Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) - 2 nos with enclosure and necessary fixing arrangements as per direction of EIC at site. | — | — | — | 25,756.2 | |
| — | 5.00 | — | — | ||
| Supply, installation and commissioning of 12 way TPN horizontal double door distribution board (Make should be of C&S/Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) consisting of 63A TPN MCB(Make should be of C&S/Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) - 1 no. in main incoming and 32A DP MCB(Make should be of C&S/Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) - 2 nos, 20A DP MCB(Make should be of C&S/Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) - 1 nos and 10A SP MCB (Make should be of C&S/Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T)- 3 nos with necessary fixing arrangements as per direction of EIC at site. | — | — | — | 59,541.15 | |
| — | 10.00 | — | — | ||
| Supply, testing & commissioning of 25A, 2 pole, 30mA, 10kA RCCB (Similar to Model - CSRB2P25A30-10kA of Make- C&S or Similar model of Schneider/BCH/ABB/Geco/Legrand/Havell's/Richa/Benlo/L&T) as per direction of EIC at site. | — | — | — | 23,893.1 | |
| — | 120.00 | — | — | ||
| Supply, installation, testing & commissioning of 18/20W LED tube light fitting with polycarbonate housing with THD less than 20% and surge protection 1.5KV 6000K (4 ft) complete with driver circuit etc and all accessories as per direction of EIC at site. Lumens out put should be not less than 100 Lumens/watt, LED should be as per LM-80/IS: 16105. LED driver's efficiency should be minimum 90%, Power factor of complete fitting should be greater than 0.90, Input operating voltage: 140V to 277V AC and driver should be as per IEC: 62384/IS:16104. The LED fittings should be warranted for 5 years. (Make should be of Crompton/Havell's/Phillips/Halonix/Benlo/Richa/Fenolex/Surya/Kolors/Jaquar.) | — | — | — | 39,493.2 | |
| — | 75.00 | — | — | ||
| Supply, installation, testing & commissioning of LED bedside light LED 2 watt (Make should be of Crompton/Havell's/Phillips/Halonix/Benlo/Richa/Fenolex/Surya/Kolors/Jaquar.) including all accessories as per direction of EIC at site. | — | — | — | 72,675 | |
| — | 30.00 | — | — | ||
| Supply, installation, testing & commissioning of 2.0 ton 5 star rated split AC including indoor, outdoor unit compressor rotary type suitable for operation on 230volt/1-ph/50 Hz and copper pipe line along with insulation, wal fixing arrangements and other accessories for connecting indoor unit to outdoor unit with copper piping as per direction of EIC at site. (Make should be of - Samsung/Voltas/Bluestar/LG/Havell's/Godrej) | — | — | — | 19,03,389.9 | |
| — | 3.00 | — | — | ||
| Supply of drinking water purifier as per standrad IS (Similar model - Aquaguard classic, Make - Eureka Forbes or Similar of Usha/Kent/Havell's) as per direction of EIC at site. | — | — | — | 25,286.94 | |
| — | 2.00 | — | — | ||
| Fixing of water cooler with gril protection, making of floor, water connection and electrical connection. | — | — | — | 6,475.82 | |
| — | 10.00 | — | — | ||
| Supply and erection of 50 mm dia 3 mtr long GI pipe for earthing thickness not less than 3.6 mm including construction of earth pit, RCC earth cover slab 1/2" thick and earth continuity by 25x3mm G I strip, GI nut bolts, earth resistance flag made of MS sheet of size 6"x4" (with black back-ground & white readings on it ) etc as per direction of Engineer - in - charge at site. Drg ref no PCEE/ELG/DRG/2024/1 Dated 30.09.2024. | — | — | — | 14,156 | |
| — | 30.00 | — | — | ||
| Supply, testing, installation, commissioning & handing over of liquid filled 2900 watt Room heater as per EIC at site. Make - Crompton/Voltas/Jaquar/Bajaj. | — | — | — | 4,14,870 | |
| — | 5.00 | — | — | ||
| Supply, testing & handing over of Insect Killer as per direction of EIC at site. | — | — | — | 14,257.2 | |
| — | 2.00 | — | — | ||
| Supply, installation & commissioning of 10.0 KVA UPS with back up time 180 minutes as per direction of EIC at site. | — | — | — | 22,40,000 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing & commissioning of 63A, 4P ON LOAD change over switch (Similar to Type - E-CSCS63NM4CO of Make C&S or Similar model of Schneider/BCH/ABB/Legrand/Havell's/L&T) | — | — | — | 18,570 | |
| — | 1.00 | — | — | ||
| Supply. Installation, testing and commissioning of outdoor MS cubical type floor mounted double door LT panel board of suitable size and suitable for 415 V, 50 Hz AC supply made out of CRCA sheet not less than 14 SWG. The panel shall be totally enclosed, dust and vermin proof, neoprene gasket of thickness not less than 2 mm shall be used between all adjacent units and beneath all covers so that the joints are effectively dust vermin proof. The busbar chamber shall have three phase & neutral copper busbar of same ratings. The drawing of panel board should be approved by the competent authority before fabrication and commissioning. The panel shall be painted with two coats of primer & two coats of exterior coating by spray painting and shall consists of the following: (i) 250A, 4P, 50kA, Ics=100%Icu, with thermal magnetic release, MCCB (Similar to Cat No -XB2H250PV4 of Make -BCH or Similar Model of Schneider/C&S/ABB/Legrand/Havell's/L&T) - 1 No. (ii) 125A, 4P, 36kA, Ics=100%Icu, with thermal magnetic release, MCCB (Similar to Cat No - XG1N125PV4 of Make -BCH or Similar Model of Schneider/C&S/ABB/Legrand/Havell's/L&T) - 2 Nos. (iii) 63A, 4P, 25kA, Ics=100%Icu, with thermal magnetic release, MCCB (Similar to Cat No -XB0S063PV4 of Make -BCH or Similar Model of Schneider/C&S/ABB/Legrand/Havell's/L&T) - 1 Nos (iv) 3 Phase Digital Ammeter (Similar to Cat No.PMX 1103 of Make - Legrand or Similar of L&T/C&S/BCH) - 1 No. (v) 3 Phase Digital Voltmeter (Similar to Cat No.PMX 1203 of Make - Legrand or Similar of L&T/C&S/BCH) - 1 No. (vi) LED Indicator (Similar to Cat No.RB2-BV03, RB2-BV04,RB2-BV05 of Make - C&S or Similar of L&T/Legrand/BCH) R/Y/B - 3 Nos. (vii) Fabrication of Panel board with 14SWG CRCA sheet including CC foundation and 300A TPN Copper busbar), cable alley, C C Foundation etc and all accessories - 1 job | — | — | — | 1,17,133.47 | |
| — | 150.00 | — | — | ||
| Supply, fixing,installation & testingof Energy efficientLED name board for Stations to be written in English, Assamese & Hindi made of stainless steel channel letters of letter height 24",depth 6", width7" made with stainless steel of grade 316 (matfinish). The channel letters will be fitted with LED modules consisting of 2 LED per module and the LED module will be fitted over a 3 mm foam board to secure fixing into the letters & the letter face will be covered with 3mm acrylic sheet of matching colour with LEDs will be given a uniform illumination without any dark spot when the LEDs are lit up. The LED modules should have hi-lux piranha Red colour LED and connected in parallel mode. The LEDs system should consist if minimum of six LEDs in 3 modules for uniform illumination of the channel letter face with minimum lumen output of 20 lumens per feet. The LEDs will be pasted and screwed in the foam board of 3M VHB double sided adhesive tape & steel screw all other parameters etc. and as per direction of engineer in charge. | — | — | — | 1,94,887.5 | |
| — | 10.00 | — | — | ||
| Supply, carrying, loading &unloading of 5 mtr long withsuitable size designer singlebracket G I octagonal poleincluding base plate, junctionbox and foundation bolt 4x16Nos (Length 450mm) etc. anderection with execution of CCfoundation work of size45cmx45cm in ratio 1:2:4 bycement,sand and chips of size19 mm and down upto full depth& 1ft above the GL as per direction of EIC at site including 6A SP MCB. | — | — | — | 1,36,886.8 | |
| — | 20.00 | — | — | ||
| Supply, installation, testing & commissioning of IP 65 45 watt street light fittings complete including all accessories as per direction of EIC at site Lumens out put should be of 100Lumens/watt, LED should be as per LM-80/IS: 16105. LED driver's efficiency should be minimum 90%, Power factor ofcomplete fitting should be greater than 0.90, Input operating voltage: 140V to 277VAC and driver should be as per IEC: 62384/IS:16104. The LED fittings should be warranted for5 years. | — | — | — | 89,043.8 | |
| — | 20.00 | — | — | ||
| Supply, installation, testing & commissioning of 25 watt street light fittings complete including all accessories as per direction of EIC at site (Similar to model no LSTS-25-CDL of M ake - Crompton or similar model of Havell's/Phillips/Halonix/Benlo/Richa/Fenolex/Surya/Kolors/Jaquar). Lumens out put should be of 100 Lumens/watt, LED should be as per LM-80/IS: 16105. LED driver's efficiency should be minimum 90%, Power factor of complete fitting should be greater than 0.90, Input operating voltage: 140V to 277V AC and driver should be as per IEC: 62384/IS:16104. The LED fittings should be warranted for 5 years. | — | — | — | 35,987.8 | |
| — | 470.00 | — | — | ||
| Supply and laying of HDPE pipe110 mm dia to withstand 8.0 Kg/sq mm pressure confirming to IS:4984/2016 (complete with necessary jointing of pipes as per standard procedure) as per direction of EIC at site. | — | — | — | 1,21,217.7 | |
| — | 600.00 | — | — | ||
| Laying of above LT XLPE insulated armoured aluminium cables as per instruction of site engineer (Cable will be supplied by Railway). | — | — | — | 7,746 | |
| — | 500.00 | — | — | ||
| Excavation of cable trench 0.75 mtrs. below the GL with laying of armored cable and refilling the same by supply of 70mm sand and soil after digging the earth. The laying of armoured cable should be done as per direction of Engineer at site. (Cable will be supplied by Railway). | — | — | — | 66,665 | |
| — | 500.00 | — | — | ||
| Supply & drawing of 1.5 sq mm PVC insulated & PVC sheathed, single core with copper conductor 1100 volts grade conforming to IS:694/1990 with latest amendments through the octagonal pole to the fittings as per direction of EIC at site. | — | — | — | 11,055 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .