Provision of Recreation Room, Parking Shed, Bathroom and SS Handrails and repair of road, Drainage system joineries and boundary wall and Addition and Alteration of the Trunking of cable laying bay At BMU Chennai Under GE(I) CG CHENNAI

Amount

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each and taken as credit complete all as specified and as directed.

Supply and fix powder coated aluminium frames for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 50 microns.

Supply and fix Plain sheet glass pane 5.50 mm thick ordinary quality and glazing with oil putty or beads in squares n exc 0.5 sqm in each pane complete all as specified and as directed. Note :(i) Make of Glass : Saint gobain/Modi Guard/Gold Fish

Supply and fix Plain sheet glass pane 5.50 mm thick ordinary quality and glazing with oil putty or beads in squares in squares exc 0.5 sqm in each pane complete all as specified and as directed. Note :(i) Make of Glass : Saint gobain/Modi Guard/Gold Fish

Supply and fix Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to wooden frames complete al as specified and as directed

Repair to pot holes any depth of area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming including supply of road metal filling and compacting with road roller complete all as specified and as directed.

Material and labour for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

Material and labour applying evenly a priming/tack coat with bituminous primer using paving bitumen of viscocity VG 10 at the rate of 5 Kg per 10 Sqm over black top surface complete all as specified and as directed.

Material and labour for Bituminous Premix Semi dense Asphaltic concrete using hot mix plant 40mm thick consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen of viscocity VG 30, levelled,rolled wtih 8 to 12 tonne tandem vibratory roller and compacted to required camber and gradient using Mechanical Paver complete all as specified and as directed. Note:The binder content is indicated tentatively and shall be as per acutal mix design.The rate of bitumen for adjustment purpose shall be as per the rate in purchase voucher.

Material and labour for road marking strips, lines ,dashes arrows,zebra crossings , letters etc of 2.5mm thick(reflective type) on new surfaces of road/pavements and the like exceeding 10 cm wide with hot thermo plast material @5 kg/sqm of white or golden yellow by applying with fully automatic paint applicator machine ,fitted with profile shoe,glass beads dispenser by providing drop on glass beads @ 0.25 kg/sqm applying with propane tank heaters and profile shoe heater etc driven by the skilled opearator on road surface complete all as per MORTH specifications complete all as specified and as directed.

Supply and fix Solar Road studs with stem made up of highly compressive aluminium alloy and polycorbonate of size 125 mmX 125mm X 20mm (height ) with built stern nails 37x37x55mm long for fixing with epoxy, 6 LEDs sustain 10 tonnes weight , water resistant, self illuminating in dim areas or during night time, Solar rechargeable batteries for continual performance without much maintenance, super bright LEDs with viewing distance of 500-800 m, equipped with prismatic reflective lense on each side complete all as specified and directed. Make:Greenlite Industries/Dary Eye/3M

Supply and fix ABS Material body road stud of dynamically designed,with pin and highly reflective reflectors moulded in PMMA material fitted on the road ,reflectors welded with a ABS Base plate through ultra sonic welding process of big size durable stud completeall as specified and directed. Make:Greenlite Industries/Dary Eye/3M

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Supply and fix mild steel framed brackets of angles or flat iron frame work such as purlins, rafter, drain cover etc with of bar/wire shouldered / riveted or forged into spikes; framed guard bars and similar work including bending and welding angles as necessary and provision for access points as per requirement confirming to Fe-290(Gde-E-165 complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for virtified ceramic coloured tiles ,Premium quality , Light shade (shade as approved by GE) . 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany

Material and labour for virtified ceramic coloured tiles ,Premium quality , Light shade (shade as approved by GE) , 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in Vertical surfaces such as dado ,skirting etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 , 15 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 qm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile not exc. 0.18 sqm in verticals etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 ,10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Preparation of old plastered wall surfaces including pilasters and cornices and applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for 2 mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st putty coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to obtain glossy surface complete all as specified and as directed. Note:Make of wall putty :Jk White cement/Birla Wall care putty

Material and labour for Preparation of plastered or un plastered old surfaces of wall including pilasters and cornice etc and applying two coats of white wash complete all as specified and as directed.

Material and labour for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) with PVC Foam profile ,homogeneous fine cellular structure having smooth outer integral skin consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC (C) channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles protions ordered to be dismanted including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed

Demolition of Reinforced cement concrete (other than ground floors) as in landing, chajjas, beams and other suspended work (reinforcement cut as required to facilitate demolition) including removal of debris to a distance not exc 100 metres and steel scrap taken as credit complete all as specified and as directed

Material and labour for Reinforced cement concrete 1:2:4 concrete type B0 using 12.5 mm graded stone aggregate as in repair of chajja, cill, facia, parapet etc. including necessary formwork complete all as specified and as directed

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:6, ,15 mm thick on fair faces of brick work surfaces and mixed with WPC as per manufacuture instructions,finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separtely

Material and labour for Rendering in CM 1:4, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Material and labour for Preparation of new plastered wall surfaces including pilasters and cornices and applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for Preparation of new plastered surfaces of walland applying three coats of white wash complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood plain framed, panelled shutter (any number of panel) with lock rail with well seasoned wood fitted with panel of 9mm B.W.P. commerical ply or 12 mm thick venneered particle board with commerical veneering on both faces fitted to chowkats with rail and stile as per IS 1003 Part-1 kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix Flush shutters 40 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides and fixed to chowkats complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid , straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Factory made Second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided in to square (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat complete all as specified and as directed.

Supply and fix in repair Flush shutters 19 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides and fixed to chowkats complete all as specified and as directed.

S&F Mild steel for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fix 125 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 200 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix in repairs 250 mm long Aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 50 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 75mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 100 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.Make :Crown/Classic /ESS ESS

Supply and fix 100 mm long aluminium handles anodised fabricated type complete all as specified and as directed.Make :Crown/Classic /ESS ESS

Supply and fix 150 mm long aluminium handles anodised fabricated type complete all as specified and as directed.Make :Crown/Classic /ESS ESS

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted steel or iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix in repairs PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories including 32 mm dia CP flush pipe etc., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to pipes and fixing of chain and pully or lever if any complete all as specified and as directed.Note :Make of flushing cistern :Parryware cat no : C8090 or Equivalent model in Neycer/ Cera

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix in repair waste fiiting 32mm bore brass chromium plated for glazed ware sink or basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm bore PVC Low density polyethylene waste pipe complete all specified and as directed.

Material and labour for Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 sq cm but not exc 400 sq cm complete all as specified and as directed.

Supply and fixed in repairs PTMT Grating doom 125 mm dia with waste hole of having minimum weight 40gms complete all as specified and as directed.

Supply anfd fix in repairs Vitreous china wash down water closet pan (pedestal pattern ), Floor mounted ,white with all fittings including fixing bolts but excluding flushing cistern and flush pipe and including connection to drain pipe and to flushing pipe etc and provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices with including 'P' or 'S' trap complete all as specified and as directed . Make : Hindware cat no: 20044 or Equivalent model in Jaquar

Supply and fix in repair vitreous china wash basin, white flat back size 630 x 450 mm including brackets, cutting for and pinning in ends of bracket or errecting stand including 32mm dia bore 1.5m long LDPE waste pipe complete all as specified and as directed.

Supply and fix in repair chromium plated fancy type 15mm dia bore Bib tap ,cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in repair Fancy type chromium plated pillar taps, LONG NECK ,15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in repairs 15mm dia bore stop /gate valve(fancy type), cast copper alloy chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for GI pipe or for unions complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in Repair Fancy type chromium plated concelead stop cock, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Prayag/ Cera/Hindware.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 375 mm long complete all as specified and as directed.Make :Prayag/M/S Shakthi Industries

Dismantling wall and ceiling boards (Fibre,pulp,insulation etc) or insulation boards/slabs/blankets , any thickness including cover fillets and taken as credit complete all as specified and as directed.

Supply and fix Powder coated aluminium snap grid frame work (size of grid 605 mmx605mm) ceilingcomplete all as specified and as directed. The following instruction should be follow while making/laying snapgrid:- Note:(i)Type of Grid : Armstrong Shilhouette grid .(ii)Minimum thickness of powder coating shall be 50 microns. (iii) Make of aluminiumgrid : Jindal/Hindalco/Indal a) Main 'T' Length = 3600mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (it is Suspended from the soffit @ 1200mm C/C with level clip). b) Cross 'T' Length = 1200mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (It is inserted fixed into the slots of main 'T' @ 600mm to from a grid of 1200 x 600mm). c) Cross 'T' : Length = 600mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (It is inserted fixed into the slots of main 'T' @ 600mm to from a grid of 600 x 600mm). c) Wall angle Web & flange = 25mm, & thickness = 0.7mm fixed to the perimeter wall of the wall portion). d) Level clip with wire : wire dia = 4mm (Used @ 1200mm c/c to hold the main 'T') e) Soffit cleat : Web=25mm Flange= 37& 25mm thickness=1.80mm ( Used at 1200mm c/c to the roul plug to suspended level clip with wire) f) Row Plug : 12.7 diameter ( used @ 1200mm c/c in both c/c in both direction) complete all as specified and as directed.

Material and labour for Hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G I flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia ,40 mm long complete all as specified and as directed.

Supply and fix 08 mm thick PVC insulation panel with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium complete all specified and as directed.Make:Armstrong/Luxalon by Hunter Douglas Products

S&F for 75mm bore PVC pipes double socketed in any length with rubber ring joints fixed to walls all complete as specified and as directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron for 75 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof all complete as specified and as directed.

S&F 75mm PVC (SWR) bends any redius complete all as specified and as directed.

S&F in 150mm dia Mild steel sheet 1.25mm thick eaves gutters, galvanised class 3, half round with rounded edges all as specified and as directed.

S&F in 150mm dia Angles (internal or external) or nozzle pieces (Out lets) Complete all as specified and as directed.

S&F in 150mm dia Drop ends sheet thickness 1.25 mm (for spigot or socket ends) or nozzles Complete all as specified and as directed.

&F in 150mm dia Stop ends sheet thickness 1.25 mm (for spigot or socket ends) Complete all as specified and as directed.

Excavating over areas exc 1.5 metre deep but not exc 3.0 metre deep and getting out in soft/loose soil complete all as specified and as directed

Material and labour for Plain Cement Concrete 1:2:4 type B-2 (using 40 mm graded aggregate) as in foundation filling ,under floor and mass concrete complete all as specified and as directed.

Material and labour for corrosion resistant TMT bars of grade Fe-500/500D of10mm dia bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for RCC type B-1 1:2:4 (20 mm graded aggregate) slabs supported on walls ,beams and columns in floors ,roofs,landings,canopies and in the shelves etc complete all as specified and as directed

Material and labour for Steel formwork to soffits of suspended slab such as roof slab, floor slab, landings and similar work with rough finished surface of concrete complete all as specifed and as directed

Material and labour for providing cement concrete type B1 1:2:4 using 20 mm graded aggregate as in lintels upto 1.5M clear span ,cills, steps, seismic and other similar bands, parapet and railing upto 60 cm in height coping including wethering slightly rounded or chamfered angles and thoarting including necessary form work complete all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil complete all as specifed and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Removing excavated soil to a distance exceeding 500 meter and not exceeding 1500 meter depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.

Demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed stone ware, AC or reinforced concrete) set in cement mortar including removal of debris off the premises not exceeding 100 meter complete all as specified and as directed.

Material and labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed in cement mortar 1:1 on Concrete bed complete including testing etc and concrete bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate and testing complete all as specified and as directed. Note:-(i)Excavation and earth work shall be measured and paid separately under relevent items . (ii) Make of SGSW pipe:TSL/ BIC/ NECO

Demolition and breaking up drain pipes, 200 mm dia (PVC, salt glazed stone ware, AC or reinforced concrete) set in cement mortar including removal of debris off the premises not exceeding 100 meter complete all as specified and as directed.

Material and labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid in trenches and jointed in cement mortar 1:1 on Concrete bed complete including testing etc and concrete bed to drain pipes of bore 200mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate and testing complete all as specified and as directed. Note:-(i)Excavation and earth work shall be measured and paid separately under relevent items . .(ii) Make of SGSW pipe:M/S TSL

Material and labour for Extra for formin fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mi-tred /stopped ends etc all as specified and as directed.

Material and labour for Extra for formin fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds, mi-tred /stopped ends etc all as specified and as directed.

Supply and fix Galvanised steel Barbed Wire 2 stranded, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of stranded rails straining bolts including securing, or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete, all as specified and as directed (each line wire to be measured) Make :Tata/RINL

Supply and fix in stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non mteallic rigid PVC conduit of size 25 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including PVC recangular board of adequate size for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex

One light point controlled by one switch

One fan point controlled by one switch

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 1.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Supply and fix repair Switch piano flush type single pole one way 5 Amp complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 to 15 Amp flush type universal complete all as specified and as directed.Make:- C&S/HPL/Legrand

Supply and fix Ceiling rose, surface type, PVC of 25 x 50mm, two to three terminals AC 230 V complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar SPN 4 way complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar SPN 8 way complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB SPN 5 to 30 Amps, Repturing capacity 10KA complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB SP 5 to 16 Amps, Repturing capacity 10Ka complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply anf fix non-metallic PVC Conduit exclusive of boxes ( junction/terminal) but inclusive of all tees,bends, elbows, reducers,bell mouth tube ends and fixing accessories such as couplers, locks nuts, saddles,pipe hooks etc PVC Conduit 25mm dia fixing through wall for drain out water from the all the existing AC's at all floors i.e (G+3 Floors) complete all as specified and as directed.

Supply and fixing sheet metal enclosure with socket plug top and MCBs complete single pole and netural enclosure with 3-pin and earth plug and socket complete with single pole MCB 30 Amp capacity including fixing in walls dully embedded complete all as complete directed.Make:- C&S/HPL/Legrand

Supply and Fix Recess mounted 2' x 2' LED flat panel 34W ,4000k high efficiency with high brightness LED for glare free homogenous illumination mounted square slim and elegant downlight/panel for indoor application with high aesthetic appeal,available in various wattage for soothing light suitable for grid ceiling with super bright LED model complete with all accessories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. Havells Cat part No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Philips/Cromtpon/surya/Bajaj

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Havells Cat part No ENDURALINEARNEOBS20WLED865SPCWH or equivalent in Philips/Cromtpon/Bajaj

Supply and fix LED light fitting 2 feet white, 10W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Havells Cat part No ENDURALINEARNEOBS10WLED865SPCWH or equivalent in Philips/Cromtpon/Bajaj

Supply and fix 5 Star rating ceiling fan 1200mm sweep Min air delivery 210 CFM with service value of 6.0 BEE five star rated with brush less direct current motor (BLDC).” suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor and including taking down old fans and removal to store complete all as specified and as directed. Make : Anchor/Havells/Crompton

Supply and fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including taking down old fans and removal to store all as specified and directed. Make : Havells/Crompton/Almonard

Supply, lay in trenches, fixeed to wall/pole/tray etc and test LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 150 sq mm complete all as specified and as directed. (Note : Make of cable : Gloster/Polycab/CCI).

Supply, install, test and commissioning of Non Clog Vertical Submersible Pumps with Chrome steel impreller and cutter, non clog to pass 40 mm size particle including supply , installation with guide rail and lifting chain, cable, earthing, testing complete with capacity of 900 lpm at 40 m head, 10 HP(7.5 KW) 415 Volts 3 Phase complete all as specified and as directed. Make: Kirloskar/L&T/KSB

Supply and lay Pipe of 150 mm dia Ductile iron ,S/S including Speicals, class "K-9", complete all as specified and as directed Make: Jindal Sam Ltd/Electro steel casting Ltd/Tata Metaliks/Tata Kabuto

Supply and fix flanged type Non return sluice valve of Class PN 1.6 , size 150 mm dia ,flanged ends including steel spindle with head, iron wheel, gland with gland packing ,mounting accessories , bolts,nuts and washers. etc including rubber gasket complete all as specified and as directed., Note:Make :Leader/Sant/Kirloskar/L&T

Supply and fix Strainer for suction 150mm dia complete all as specified as directed.

Supply and fix flanged type sluice valve of Class PN 1.6 , size 100 mm dia ,flanged ends including steel spindle with head, iron wheel, gland with gland packing ,mounting accessories , bolts,nuts and washers. etc including rubber gasket complete all as specified and as directed., Note:Make :Leader/Sant/Kirloskar/L&T

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test points all as specified or indicated including 100 Kgs of Bentonite powder and excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 50mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with 50mm dia protection pipe and 20mm dia medium grade watering pipe, wiremesh and GI lugs, GI protection pipe and testing on completion complete all as specified and as directed Note: The rate quoted inclusive of 32X6mm GI earth strip upto a length of 7.5mtrs from the earth pit

Supply Fabricate, install, connect, test and commission in repairs INDOOR type weather , dust , water & Vermin proof LT electrical panel board, Factory fabricated cubical kiosk type , 1100 volts, 50 Hz AC supply, totally enclosed with front opening hinged doors with plain top projected Manufactured by CPRI Approved Manufacturer, fully made out of 2.00 mm thick CRCA Sheet with 200 Amps rated copper chamber including cable gland of suitable size and adequate nos and cabinet for housing/mounting switch disconnection fuse unit including suitable angle iron/ flat iron frame work/ supports bottom 40x40x6 mm MS channel as base and metering equipment prewired complete suitable for mounting following switch gear items internally connected with suitable capacity copper link strips for RYB &N supply and internal wirings with FRLS copper conductor cable connection using new lugs with suitable colour code duly marked the incoming and outgoing controls complete mounted on PCC Platform and foundation, complete with danger notice and finished with external surfaces two coats of powder coating paint over a coat of red oxide zinc chrome primer complete all as specified and comprising of the followings:-Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (ii) Getting of approval for Panel board drawing from GE is necessary before fabrication. (iii) All switch gears should be fixed with 06 mm thick Fibre sheet insulation. Note : Make of Panel board : L&T,Advance&Schnieder

(i) MCCB TP 25 to 100 Amps, 16 KA breaking capacity 4 pole 415 volts Make : Siemen/Schneider/GE - 01 No (Outgoin) iI) MCCB TP 25 to 40 AMps Amps, 16 KA breaking capacity-03 Nos (02 out going , 01 X spare) iii)MCB SPN 40 to 63 AMPS ,10 KA= 02 Nos iv) Fully automatic Star Delta Starter 10HP -02 Nos V) Digital meter for showing volt, amps and frequency. Aluminium busbar TPN 200 Amps including DMC insulators, PVC sleeves etc. Vi) Water Level Indicator Microprocessor Based Control Panel Suitable Contactor, Relay and Control Wiring complete all as specified and as directed. NOTE: The Starter shall be suitable for wiring with water level indicator automatic ON/OFF microprocessor control panel Necessary contactor, relay etc deemed to be included in the quoted rate.

M/SJAYAM CONSTRUCTIONS

JANANIKARTHIK ENTERPRISES