CLEANING OF SERVICE WATER TANKS AND PREMONSOON MAINTENANCE TO BUILDINGS AT VARUNAPURI I II III MAP AREA NAY G AND UWR UNDER AGE BR II OF GE NW VASCO

Amount

CLEANING OF SERVICE WATER TANKS AT VARUNAPURI I, II, III, MAP AREA, NAY (G) AND UWR.

Cleaning of storage water tank of PVC/HDPE exc. 250 ltrs but n. exc 500 ltr capacity staged over RCC roof/floor slab or similar place inside /outside bldgs by removing float valves carefully, thoroughly cleaning the wall, floor and ceiling of the tanks, mouth of pipe etc, removing the dirty water, sludge and other depositions to a distance not exceeding 50 mtr to make the tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to entire satisfaction of Engineer-in-Charge and as specified in particular specification and refixing of float valves all as specified and directed

All as per item No. 1.01 above but water tank of capacity exc 500 ltr but n. exc 1000 ltrs

All as per item No. 1.01 above but water tank of capacity 2000 ltrs

Cleaning of storage water tank of RCC/AC of 2000 ltr capacity staged over RCC roof / floor slab or similar place inside /outside bldgs by removing float valves carefully, thoroughly cleaning the wall, floor and ceiling of the tanks, mouths of pipe etc, removing the dirty water, sludge and other depositions to a distance not exceeding 50 mtr to make the tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear and applying anti algae material of approved make at inner surfaces of RCC/AC tank to entire satisfaction of Engineer-in-Charge and as specified in particular specification and refixing of float valves all as specified and directed by Engineer-in-Charge.

S& F in repair PVC water tank covers circular type with suitable nut and bolts complete for water tanks of 500 to 2000 ltr capacity all as specified and as directed.

Writing letters TANK CLEANED ON DD MM YYYY of not exceeding 7.5cm high each letter, painted with black letters on sufficient white background on external visible face of water tank with synthetic enamel paint after removing completely existing letters if any complete all as directed.

Supply and Fix in repairs ball valve high pressure PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed 20mm bore. (Minimum weight 210 gms).

All as per item No. 1.07 above but 25mm bore ditto (Minimum Weight 455 gms).

Taking up/down old GI tubing and connections of size 15mm dia complete all as specified and as directed.

All as per item No. 1.09 above but 20mm dia ditto

S&F CPVC pipes 20mm outer dia SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

All as per item No. 1.11 above 25mm outer dia ditto

S&F in repairs 200 ltr capacity PVC Loft Tank of rectangular type suitable to fix in kitchen of bldgs complete all as specified and as directed. .

S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tank all as specified.

S&F Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tank all as specified.

S&F Rotational moulded polyethylene water storage tanks 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tank all as specified.

S&F in repairs Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20 mm bore.

Taking down cement plaster of any description on brick or stone walls including racking out joint hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick plaster in CM (1:4) in two coats (10mm thick backing coat and 5mm thick finishing coat) finished even and smooth without using extra cement including mixing of integral water proofing compound etc complete all as specified and directed.

Supply only integral water proofing compound all as specified.

M&L rendering 5mm thick plaster in CM 1:3 on ceiling/concrete surfaces/ soffits of slab etc finished even and smooth without using extra cement

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level)

M&L PCC 1:3:6 type C-2 with 40mm graded aggregate as in 75mm thick plinth protection finishing even and smooth without using extra cement

Preparing newly plastered surfaces of ceiling and applying three coats of white wash

M&L preparation of newly plastered surfaces of walls and applying two coats of antifungal paint exterior grade

M&L preparing old treated surfaces of wall and applying one coat of antifungal paint exterior grade.

S&F in repairs Bib tap standard of PTMT 15mm dia any colour screwed for iron/CPVC pipes and fixed.

S&F in repairs stop valve of PTMT 15mm dia any colour high pressure screwed for iron pipe(Minimum weight 15mm- 90gms/20mm- 92gms).

S&F in repairs angle stop valve of PTMT 15mm dia any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms.

S&F Shower rose with shower arm 195mm long of PTMT any colour, for fixing to CPVC/steel pipe of 15mm bore fixed in repairs complete all as specified

S&F PVC connection, 450mm long with brass CP check nuts suitable for connecting 15mm dia pipes, superior quality fixed in repairs, complete all as specified.

PRE MONSOON MAINTENANCE TO BULDINGS AT VARUNAPURI I, II, III, MAP AREA, NAY(G) AND UWR.

Dismantling of single layer mangalore pattern roofing tiles and stacking reusable tiles for reuse complete all as directed

Dismantling of battens for tiles of any size including tiling fillets exc 15 cm c/c

Dismantling of plain or corrugated steel sheeting any thickness including similar pattern roof coverings

Dismantling structural steel work including doors, gates framed truss etc.

Taking down plastering (Cement plaster) on brick or stone walls etc including racking out joints , hacking for key scrubbing down with water etc.

Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings all as specified and as directed. .

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.

S&F mild steel work as in angle iron door frame or grating and similar work for manhole covers, including 12mm dia pivot type hinges, including preparation of surfaces and applying two coats of synthetic enamel paint over one coat of red-oxide primer to exposed surfaces of steel and sanding & tarring all steel surface in contact with concrete; steel conforming to grade Fe-290 (Gde E-265) complete all as specified & directed.

M & L for rolled mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc; conforming to Fe 410-W(Gde-E- 250)

M&L APP based polymeric membrane minimum veight 3kg/sqm and minimum 3mm thick reinforced with polyster non- woven fabric (wt. not less than 150gms/sqm) laid on primed surface by force application method with minimum side overlap 100mm and 150mm as end lap over roofs after cleaning the surfaces properly with water and allowed to dry completely including priming surfaces for applying heavy treatment complete all as specified and as directed.

M & L rendering 10mm thick (avg) on concrete surfaces over roof slabs, in cement mortar 1:4, mixed with liquid water proofing compound, finished even and smooth without using extra cement , to receive roof treatment complete all as specified and as directed. (Note: - water proofing compound shall be measured and paid separately)

Supply only liquid waterproofing compound.

Dismantling / taking out existing hessian base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismanthed debris to a distance exc 200m & n exc 250m complete all as specified and as directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required, reconnecting and refixing in position upto 1000 Ltr capacity complete all as specified and as directed.

M&L for applying two coats of water proofing treatment to walls by using Araldite builder barrier coat "Dr. Fixit (Rain Coat)" or equivalent @ 5 sqm per litre for first coat and 6 sqm per liter for second coat alongwith addition of suitable pigments for colour as directed by Engineer-in-Charge all as specified in manufacturer's instructions and to be applied through authorised applicator of manufacturer complete (Note: The Contractor shall provide 5 Years guarantee for the treatment).

M&L preparation of surfaces by washing down with water and applying a coat of acrylic polymer bonding agent @ 0.50 liter per sqm and applying first coat of cement plaster in cement-sand mortar 1:4, 10mm thick with in half an hour when bonding agent becomes tacky. After proper curing ,apply second coat of plaster in cement mortar 1:4, 5mm thick mixed with and including 100ml of liquid water proofing compound per bag of cement all as per manufacturer's instructions, finished even and smooth without using extra cement complete as specified and as directed.

M&L for cutting "V" groove and filling with cracks using crack sealing chemical of approved make complete as specified and as directed.

M & L preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for preparing newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer.

M & L rendering 10 mm thick, on other than fair faces of brick or stone surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5 mm thick in cement mortar 1:3 on soffit of ceiling, finished even and smooth without using extra cement all as specified and as directed.

Taking down PVC (SWR) pipes 75/110mm from walls including fittings.

M&L UPVC pipe, 75mm bore, single socket, in any length with rubber ring joints, fixed to walls all as specified and as directed. .

All as per serial item No. 2.24 here-in-before, but UPVC (SWR) pipe 110mm bore .

S & F UPVC (SWR) bends, diminishing pieces or tapers, 75mm bore, any radius,

All as per serial item No. 2.26 here-in-before, but 110mm bore

S & F UPVC (SWR) branch piece, single, (Single Y), equal or unequal with access door, 75 mm bore size all as specified and as directed. .

S & F UPVC (SWR) branch piece, single, (Single Y) ,equal or unequal with access door, 110mm bore size all as specified and as directed.

S & F UPVC (SWR) branch piece, double, (double Y), equal or unequal with access door, 75mm bore size all as specified and as directed.

S & F UPVC (SWR) branch piece, double, (double Y), equal or unequal with access door, 110 mm bore size all as specified and as directed.

S & F 110 mm dia UPVC (SWR) vent cowl all as specified and as directed.

S & F UPVC (SWR) gully trap 75mm dia with grating, including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) all as specified and as directed.

Supply only welded steel wire fabric weight n exc 4 kg per sqm

M& L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for preparation of surface by application of rust remover on exposed reinforcement using rust remover of approved make, apply passivator coat using zinc primer of approved make on reinforcement Bars. Apply bond coat using "Epoxy bonding agent" on entire surface, when bond coat becomes tacky apply repair mortar (using universal polymerised repair mortars single pack like Pagel U40 or Micro-concrete) in layers of 15mm and subsequently built up the required thickness (45mm) in subsequent layers of 15mm and finishing the final layer even and smooth as per manufacturers instruction and as directed. Make : M/s Pidilite Industrues Ltd or Equivalent in M/S Krishna Conchem Products / STP Ltd. including removing of loose concrete and existing treated surface Note: Application to be done by authorised applicators only. (Note : Weld Mesh will be paid separately if applicable)

S&F in repairs aluminium alloy wire mesh 0.45mm nominal dia of wire and avg width of aperture 1.4mm , cut to size and fixed to doors/window shutters with aluminium wire staples as ordered complete all as specified and as directed.

S&F in repair plain aluminium alloy sheeting 0.56mm thick, as in ridges, hips, valley gutter, drip and straight flashing, fixed with self-tapping screws complete all as specified and as directed.

M&L preparing new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of anti corrosive paint over a coat of zinc chromate primer complete all as specified and as directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets

M&L providing Aluminium (powder coated) snap grid frame work for false ceiling of grid size 605 mm x 605 mm complete all as specified and as directed.

M & L for 12mm thick mineral fibre perforated board (white), fixed with screws to aluminium snap grid false ceiling frame work (Note: Aluminium grid shall be measured separately under relevant item of this Schedule.)

M&L for applying two coats of oil bound distemper on perforated particle boards after necessary preparation to surfaces complete all as specified and as directed.

M&L preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of anti -corrosive paint complete all as specified and as directed.

Taking down chowkats/frames with shutters n exc 1.5 sqm each (without taking off shutters from the frame)

All as per serial item No. 2.45 here-in-before, but exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame)

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with MS square tube, fixed in position as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserts for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails (stiles and rails feathered at edge) with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Aluminium alloy anodised sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F stainless steel butt hinge, medium weight, 100mm size complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, 100 mm long complete all as specified and as directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150 mm overall length of cover plate complete all as specified and as directed.

S&F mild steel work as in bands, straps, clamps, hold fasts and similar small articles conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

M&L for providing plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in bed blocks for hold fasts, roof kerbs or mud stops, rounded or chamfered on edges etc, including weathering, slightly rounded or chamfered angles and throating as directed.

M & L Forming jambs, etc to openings in cement mortar 1:6, including cutting, toothing and properly bonding new into old work also fixing, jointing and pointing/plastering to match with the existing work complete

M/S. M M S ENTERPRISES

Leela Enterprises

CVs CONSTRUCTIONS

Tara Construction