Supply and installation of unbalanced type line voltage corrector device Pump House -I with supply and fixing of pressure gauge and repairing of illumination arrangementat Pump House -I and II of Champapukur water supply scheme under Eastern Mechanic

Amount

Supply of 100 mm. Dia , 0-10 kg/cm2 range, bourdon type pressure gauge (Make : FEBIG/H.Guru)

Supply of SS Syphones (Q type)

15mm dia check valve (horizontal) G.M. tested to 21 kg per sq. cm

Fitting, fixing the above materials as in item no. 1.00 to 3.00 at the outlet of pumping delivery main and comissioing the same as per direction of EIC. (at PH-I & II )

Suppy & Fixing of 18watt wall mounted LED tube light set. (Make - Philips/havells or other approved)

Supply & Fixing only pendent light fitting complete with 9W LED lamp(M-Philips/Havellsor other approved), shade and 24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder (at PH-I & II )

Supply & delivery of street light luminarie IP 66 LM6-HPDC Housing Street light aerodynamically designed with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no-BRP 031 LED 45 CW SLR GR PSU SPD) Make-Philips OR Equivalent and same techinal specification . (at PH-I & II )

Fixing outdoor LED light fitting complete as in item no. (7.0) with all accessories to be fixed/projected from the parapet wall of the Pump House incl. S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting.

Supply & delivery at site 15 KVA 3-Phase oil cooled type servo motor operated copper wound line voltage conforming to IS-9815 (Pt-1)-1994 suitable for unbalanced Input Voltage with respect to phase to phase 250V-500V and phase to neutral 119V-290V including first filling oil as per IS-335 where applicable. (at PH-I) For further details go through technical specification

Supply and delivery of following materials:

100 Amp 4 pole on load change over switch

100 Amp 4 bar copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain chair etc. with painting complete as per direction of the EIC.

100 Amp TPN Switch Disconnector Fuse Unit with bolted type fuse in sheet steel enclosure

16 sqmm 3.5 core PVC insulated 1.1 KV AI, Ar cable conforming to IS-7098 (part-1) 1988 with upto date amendment. (Cable will be procured as per site requirement)

Making brick built foundation with supplying of all required materials suitable for the above voltage stabilizer by (4:1) cement mortar including holding down foundation bolts and 12mm thick plaster with neat cement finish as per direction of EIC.

Installation of the above voltage stabilizer of item No.1 on the foundation including all connection complete as per direction.

Fitting Fixing and connection of above supplied changeover switch,busbar and mainswitch as in item no 11.00 & 12.00 on the wall by supplying all necessary materials to complete the job as per direction of E.I.C.

Drawing & connection of cable on wall as in item no. 13.00 and all connection complete with all equipment as per requrement and as per direction of E.I.C.

Making joints of the cable by supplying compression type gland, thimble socket etc. as per requrement & as per direction of E.I.C.

Earthing with 50 mm dia. G.I. pipe, 3.65 mm thick & 3mtrs long (2 sets) and conn. by 25x 6 mm G.I. strip ( for reqd length) upto the earth bus-clamp with the equipments on wall/floor with staplesburied inside as reqd. at site and with 25 mm x 6mm GI flat strip to earth electrode pipe,fastening with 13mmx80mm G.I bolts,nuts,washers, including all f & f of materials & filling & restoring the surface by ramming &making suitable earthpit with brick structure & MS lid on top as per direction. (PH-I)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/KEI/Havells) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.

Average Run (5 Mtr)

on board

Suppy & Fixing of 18watt wall mounted LED tube light set. (Make - Philips/havells or other approved)

Supply & Fixing only pendent light fitting complete with 9W LED lamp(M-Philips/Havellsor other approved)), shade and 24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder

Integrated LED Bulk head luminaire of pressure die cast housing, acrylic diffuser & frame with IP65 protection. (Make-CGL(LBH-10-CDL)/Philips (Endura WT202W LED6S NW PSU S2 PC)/ Similar type of approved make)

Add: GST @ 18%

Add: Cess @ 1%

ANJAN ENTERPRISE (BID ID -5784195)

P. K. ENTERPRISE (BID ID -5784205)