Loading
Loading…
Loading…
Tender Value
₹9.5 L
EMD Value
₹18,920
Closing Date
9 Oct 2026, 5:00 pm
Add. Municipal Commissioner
New Purulia Road, Near Gandhi Maidan, Mango
For Deep Boring Installation with laying of pipe at ward 11 Jahira path Under MMC Jamshedpur in East Singhbhum Dist.
2026_UDD_119146_24
UDHD/MMC/14/2026-27
Open Tender
Civil Works - Others
Percentage
180 days
MMC Area
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹18,920
26 Sept 2026
26 Sept 2026
10 Oct 2026
26 Sept 2026
9 Oct 2026
26 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Cost of drilling 200mm x 165mm x 175m deep bore well in all kinds of soil and rock in urban or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipments, as well as fule, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete.(1) From 0-50 meter | 50 | p/m | 847 | ₹42,350 |
| 2 | (2) From 51-125meter onwards | 125 | p/m | 884 | ₹1,10,500 |
| 3 | E/W in excavation (As per I.S. 3114/1965 For laying of different type and size of pipe so as to give one Mtr. Avarage cover over the socket of pipe with disposal of excavated earth within initial lead and as per specifaction and direction Engineer -in- Charge. | 80 | cum | 233.83 | ₹18,706.4 |
| 4 | Supplying labour and tools for fixing G.I pipe with read lead and yarn of following nominal bore with screwed and socketted joint on wall,celing and floor including supplying and fitting of wall hook or pipe clamp,wooden plug,cutting pipe to size and threadind end if required etc.all complete as per specification. | 97.2 | mtrs | 192.06 | ₹18,668.23 |
| 5 | GI Pipe 50 mm dia (TATA or equivalent make) as per IS-1239
(part-01) / 2004 ISI Marked / Medium Quality | 150 | mtrs | 422.44 | ₹63,366 |
| 6 | Full way Valve (ISI marked) 50mm | 4 | nos | 1,399.92 | ₹5,599.68 |
| 7 | E/W in excavation (As per I.S. 3114/1965 For laying of different type and size of pipe so as to give one Mtr. Avarage cover over the socket of pipe with disposal of excavated earth within initial lead and as per specifaction and direction Engineer -in- Charge.1x200MX0.5MX1M =100M³ | 100 | cum | 150.29 | ₹15,029 |
| 8 | Supplying labour and tools for fixing G.I pipe with read lead and yarn of following nominal bore with screwed and socketted joint on wall,celing and floor including supplying and fitting of wall hook or pipe clamp,wooden plug,cutting pipe to size and threadind end if required etc.all complete as per specification. | 200 | mtrs | 108.52 | ₹21,704 |
| 9 | ProvidingP.C.C M-150 Iin nominal mix at foundn, with approved quality of stone chips 20 mm to 6mm size graded and clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing(but excluding the cost of reniforcement , taxes and royalty all complete as per building specification and direction of E/I | 89.01 | cum | 4,503.43 | ₹4,00,867.87 |
| 10 | G.I. Fittings (Conforming to 1.S.- 1879) 50MM(A) GI BEND | 10 | nos | 105.75 | ₹1,057.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.70 MB
BOQ_161226.xls
BOQ • 0.24 MB
TNC2026.pdf
Tender Documents • 1.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .