Diversion of 03 nos of feeders from mandip chowk to new pump station via CMD View point of SOCP, IB Valley Area

Diversion of 03 nos of feeders from mandip chowk to new pump station via CMD View point of SOCP, IB Valley Area

Loading and unloading of poles from SOCP IBVA to Site (To and fro)

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required (10 to 12 mtr height)

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required

Supplying and erection of 11 kV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

Supplying and erection of 11 kV disc insulator for 11 kV overhead lines with galvanised insulator fittings, ball and socket type complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as rea u i red.

Supplying of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 11/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of pole top straight two wire / V shape two wire / angle / channel iron, cross arm on steel tubular / rail / PCC pole for 11/22/33 kV as required

Providing and fixing 6 SWG dia G.I. wire or surface iron recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required

Installation and commissioning of GOAB switch on overhead structure

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Dismantling of pole / steel light standard / strut embedded in cement concrete foundation etc. as required

Dismantling of over head lines comprising of copper/ aluminium over head conductor, Cl. wire, cross arms, insulators etc. as required.

Dismantling of dismantling of stay set embedded in brick ballast / concrete foundation etc. as required

Dismantling of GOAB Switch

Supplying of nut bolts

Applying and priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works on pole (6.5 Sq. mtr per pole)

Cleaning, Painting with aluminium paint/Gloss Enamel Silver Grey Paint of approved brand and manufacture (single coat on Pole and bracket) to give an even shade (6.5 Sq Mtr per pole)

Painting with Gloss Enamel – Assorted colours (PINK, ORANGE, GREEN/others etc.) Paint of approved brand and manufacture to give an even shade on single coat on Bottom part of Poles (1.5 mtr from Ground) (1.02 Sq Mtr per pole)

Supplying and erection of cradle guard complete (Material – Galvanised Iron 6 SWG, Grid of 7X25 Mtr, Road Crossing Span 50 Mtr) in HT Line Crossing in Mines

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

Please Enable Macros to View BoQ information