SPL REPAIR TOILET BLOCK BLDG NO H/07 BD H/08 BD H/19 BD H/20 BD H/21 BD AND H/23 BD PSYCHIATRIC WARD OF B BLOCK OF MH AND CERTAIN MINOR WORKS MEERUT UNDER GE(U) MEERUT CANTT

Amount

Dismantling plain or corrugated asbestos cement ( corrugated/semi-corrugated etc) sheets in roof covering

Dismantling wrought iron or mild steel work of any description not other wise provided

S&F and Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

S&F MS wind tie for roof including securing bolt etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed self tapping screwes/ J or L type cranked hook bolts complete all as specified and directed.

Ditto as per above item but plain sheet as in ridge

M&L providing cement concrete type B1, 1:2:4( 20 mm graded aggregate ) in roof kerbs or mud stops rounded or chamfered on edge

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base to receive tile flooring.

M&L desinger digital glazed ceramic coloured tiles of size 300mmX600mm , 7-8mm thick , on vertical surfaces such as dados skirting and risers to step etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and incuding 10mm thick renderingin CM 1:4 complete all as specified. ( the quoted rate shall deem to be included for screed beading and shall not be measured and paid separately ).

M&L non skid cut edge coloured ceramic tiles 7mm to 8 m ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete

Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc

M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 Complete all as specified and directed

Taking down cement plaster including raking out joint hacking for key scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering on brick/ concrete surfaces of external wallsin CM 1:4 finshed even and fair etc complete all as specified

M&L for applying 10 mm thick in cm (1:6) on brick/ concrete surfaces of internal walls finshed even and fair a complete all as specified

M&L preparation of new plastered/ umplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of distemper oil emulsion of any tint or shade over a coat of primer and over 1 mm thick wall care putty complete all as specified.

M&L for new plastered surfaces applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm thick wall care putty. complete all as specified and directed

Complete removal of existin treatment of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of oil bound distemper over a coat of primer complete all as specified & directed.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame).

Taking down Chowkats or frames exc. 1.5 Sqm n,exc 4.00 sqm each, with shutters (without taking off shutters from the frame).

S&F factory made single extruded WPC (Wood polymer Composite) solid door /window and other frames / chowkhats of size 45X70mm comprising of virgin PVC colour of K value 58-60 ( suspension grade ) calcium corbonate and natural fibre( wood powder /rice husk/white husk) and nn toxic additives ( max toxicity index of 12 for 100 gms ) fabricated with miter joints after appying PVC solvent cement and screwed with full budt treated star headed SS screwes having minimum frame density of 50 kg/Cum screwe withdrawal strength of 2200N ( Face) and 1100N ( Edge) minimum compressive strength 58N/mm2 , mouldes of elasticity 900N/mm2 and resistance to spread of frame of class A category with property and being termite /borer proof , water /moisture proof and fire retardant and fixed in position with MS hold fast/lugs SS dash fasteners of required dia and lenght complete as per direction of Engr-InCharge

S&F Factory made single extruded WPC ( Wood Polymer Composit ) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 ( suspension grade ) calcium corbonate and natural fibres ( wood powder /rice husk/wheate husk ) and non toxic additives ( Max toxicity index of 12 for 100 grams ) having minimum density of 650 Kg/Cum and crewe withdrawal strength of 1800N ( Face) and 900N ( Edge) minimum compressive strength 50N/mm2 , mouldes of elasticity 850N/mm2 and restance to spread of frame of class A category with property of being termite /borer proof , water /moisture proof and fire retardant and fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screwesincluding door closer of desination No 2 all as per direction of Engr-InCharge

S&F powder anodised sections windows/ventilator double leaves, double shutter side hung/ top hung comprising glazed and gauged shutters with frame using aluminium podwer coated sections of size 101.60mmx38.10mm for frames, 47.62mmx44.45mm for stiles and rails of shutters having 1.25mm thickness, galzing with 5mm thick tinted sheet glass fixed with and including aluminium powder coatedd snap beadings, neoprene gaskets, shutters fixed to frame with with 75mm size stainless tseel butt hinges -02 Nos per leaf, aluminium powder coated section 150mm long hanle-01 Nos per leaf, aluminium powder anodised stay with hook and eye of suitable side -01 Nos per leaf, aluminium powder anodised Tower bolts-02 Nos per leaf, aluminium powder coated deco grill with suitable U frame for fixing grill, stainless steel wire cloth of 0.36mm dia with 1.18mm width of aperture complete all as specified and directed.

S&F for 150mm size stainless steel handles, fabricated type, anodised all as specified and directed.

S&F for stainless steel barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.

S&F but hinges stainless steel 75 mm size

S&F for CPVC pipes 20 mm bore of pipe ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors (SDR-13.5) including taking down of existing water pipe line

S&F for CPVC pipes 25mm bore of pipe ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors (SDR-13.5) including taking down of existing water pipe line

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic seat cover black closed pattern with flat bottom and cover mild steel chromium hinhes device and zet sprey complete

S&F ( in repair s) viterous china ' orissa pattern size 580X440mmwhite with integral foot rests water closet including PVC P trap connection to flushing pipe antisyphonage pipe trap in and including concrete provision of lime concrete bedding ( 1:2:5) min 150 mm thick alround making good floor to match with the exxisting complete all as specified

S&F in repair vitreous china urinal half stall white ( excluding flushing cistern flush pipe and waste pipe including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screwes pointing around urinal back in cement ,

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & plag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish

Supply & fix in repairs steel C.P. grating 100 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F in repair 15 mm bore stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

S&F in repairs chromium plated mixing valve, wall mixer 3 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe including three joints to steel pipe or unions.

S&F in repairs chromium plated basin mixing valve with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions.

S&F in repairs chromium plated shower rose overhead single flow 100mm dia (ABS chrome plated) without Arm including fixed to steel pipes or union and complete all as specified.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including connections and fixed in position complete all as specified and directed

S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Dismantling of 100/110 dia cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed

S&F of 110mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm dia size pipes.

Dismantling of 75 dia cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed

S&F of 75 mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 75mm dia mm size pipes.

S&F 600X600 mm size looking mirror edge of slected quality glass mounted on steel studs with stain less steel screwes to wooden pluge with and put up washers etc

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with chromium plated bracket guard and railing 60 cm long complete

M&L preparation of new steel surfaces of any description exc 10 cm girth including holdfasts distance pieces etc with two coat synthetic enamal paint over a coat of red oxide

M&L preparation of new steel surfaces of any description n,exc 10 cm girth including holderbats distance pieces etc with two coat synthetic enamal paint over a coat of red oxide

M&L preparation of old wooden surfaces of any description exc 10 cm girth including holdrebats distance pieces etc with one coat synthetic enamal paint

M&L for surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50m and making good surface

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in foundation filling and mass concrete

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in any type of soil.

Removing excavated material n ;exc 50 m and depositing where directed at a level n;exc 1.5 m above the starting point

Returning , filling, incl spreading leveling, watering and well ramming in layers n.exc 25cm in soil complete all as specified.

M&L hardcore of guage exc. 63 mm but n,exc 100 mm thick deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammedto a true surfaces

M&L 100 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified.

M&L for preparing new plastered of walls and applying two coats of cement base paint all as specified and directed by EIC

M&L for Machine pressed precast concrete interlocking paver block with pigment any shape and size confirming to IS-15658-2006 of 60mm thickness 25mm grade concrete over 25mm thick sand cushioning complete all as specified and directed.

M&L PCC 1:3:6 type D2 ( using 40mm graded crushed stone aggregate) as in foundation filling sub base and mass concrete all as specified.

M&L for providing precast cement cocncrete Jafarey wall 75 mm thick type CO, 1:3:6 ( 12.5mm graded aggregate ) including all moulding and set in cm 1:4 brick work with fly ash bricks straight or curved on plan to complete including taing out existing jafarey wall complete

M&L reinforeced cement concrete tye B1 1:2:4 ( 20 mm graded aggregate ) as in lintel includng necesary form work complete

M&L MS round bars 10mm dia and over cut to length bent to shape required cranking bending hooking and as required for link in chain link fencing

S&F anodised aluminium grill ( anodised or dyed to required shade according to IS :- 1868 with minium anodic coating of grade AC 15) of approved design/ pattern with approved standared section and fixed to the exixting window /door frame with C brass/ stainless steel screwes @ 200mm centre ro centre including cutting the grill to proper opening size fpr fixing and operation of handles and fixing approved anodised aluminium standard section around the opening . all complete as per requiredment and direction of Engr-In-Charge

Excavation in over area not exceeding 1.5 mtr in deep and getting out in soft /loose soill for foundation of manholes etc complete all as specified and directed.

Ditto but exc 1.5 meter deep and n.exc 3 meter depth complete

M&L PCC 1:3:6 type D2 ( using 40mm graded crushed stone aggregate) as in foundation filling sub base and mass concrete all as specified.

M&L reinforcement cement concrete type type B12 1:2:4( 20 mm graded aggregate) as in slab supported on wall, beams and columns and the like etc all as specified and directed

Form work to sofits of suspended slabs such as roof slabs, landing and similar work not exc 200mm thick rough finished surfaces of concrete flat

M&Lcement concrete bed in 1:4:8 type D2 to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested for 200mm bore pipe

M&Lcement concrete bed in 1:4:8 type D2 to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested for 200mm bore pipe

M&L MS TMT bars 10mm dia and over cut to length bent to shape required cranking bending hooking for column hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia foe securing with clips

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items will be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the adjoining surafces complete all as specified .

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed FRLS copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

(a) One light /Tube/ fan point controlled by one, one way switch 05/06 Amps

(b) One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 83 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated FRLS copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed

S&F 10 watts Light emitting Diode (LED) tube light fitting wall mounting, indoor PC LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 2' long, easy to install, Efficacy:100 lumen/watt, Minimum 3.5 KV Voltage Surge Protection, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S&F LED Bulk Head Fitting 10 Watt housing made up corrosion resistant unbreakable PC with high quality diffuser for glare free Aesthetically designed gaskit IP65 protection, efficacy 95lm/watt complete all as specified and directed.

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs including Taking down complete all as specified & directed

Supply & fixing MCB SPN, AC, 240 volts of 40/63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs and including Taking down complete all as specified & directed.

Taking down of existing unserviiceable Sheet metal enclosures (DB) complete and removing and S&F epoxy powder coated distribution box, SPN, 8 ways, 240 volts, IP-43 ,metal double door for MCB , grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

S&F LED Bulb 10 watt 240 volt

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supplying and fixing 10 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, two twin core cable flat or circular complete all as specified and directed.

Supplying, fixing in replacement LED Security light including connecting and testing of energy saving & environment friendly, made out of pressure die cast anodised aluminium with toughened glass cover housing, 30 watts LED to achieve electrical safety class 1, Pf >0.95, lumens >110 lm/W, Ingress protection not less than IP65, including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed.

Taking down of existing unserviceable Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making connections with suitable size of copper wire and making good surfaces complete all as specified and directed.

VIRAT CONSTRUCTIONS (BID ID -3068626)

SA construction co. (BID ID -3068886)

Rajneesh Jain (BID ID -3079392)