SPECIAL REPAIRS TO GOVT MD ACCN NO 114/01 TO 114/08 AT IMH LINES OF EME DEPOT BN UNDER GE (SOUTH) SECUNDERABAD

Amount

Demolition of cement concrete any description and any position not otherwise specifically provided.complete all as specified and as directed

M&L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in padding (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even with out using extra cement. Note : Supply of water proofing compound will be measured and paid separately.

Matrial & labour for water proofing treatment with APP based standerd membrane over PCC padding of roof with the following cornises of treatment :- (a) Applying of bituminous primer @0.30 kg/Sqm as per IS-3384 including cleaning the surfaces complete all as specified and directed (b) Applying of APP plastomeric bitumen based mineral finished water proofing membrane,polyster reinforced (3.50/Sqm) with 10cm overlaps and tourch bounded at joints including surface preparation before and after application of treatment as per manufacturers instructions complete all as specified and directed.

Supply only integral water proofing compound.

M&L for PCC 1:5:10 type E-2 using 40 mm size graded stone aggregate as in filling of sunken portion etc complete all as specified and directed. .

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of waterr based bitumen emulsion primer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay waterr proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding as in sunken floor (bottom and vertical) complete all as specified and as directed. Note : Supply of water proofing compound will be measured and paid separately

S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50mm graded aggregate as in level course on floor etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing.complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor.complete, complete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, all as directed and as specified.

All as per item No 13 above but on vertical surfaces as in skirting/dado level etc.complete all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat.complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x200x7mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match.complete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description.complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:4 with water proofing compound over a layer of 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished fair and even without using extra cement. complete all as specified and directed.

M&L new plaster surface of walls and applying two coat of oil bound distempers over one coat of primer and two coat of wall care putty complete all as specified and directed

M&L for preparation of new plastered or un- plastered surfaces of walls including cornices, pilasters etc and applying two Coats of cement base paint over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat primers with two coat of wall care putty complete all as directed by Engr-in-charge.

M&L complete removal of existing treatment applying two coat of cement base paint over a coat of primer paint on walls complete all as specified and directed

M&L complete removal of existing treatment applying three coat of white wash on ceiling etc complete all as specified and directed

M&L for preparation of new plastered or un- plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm each incl iron mangery complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each incl iron mangery complete all as specified and directed.

S&F steel window with side hung double shutters on both sides to receive glass on one side shutters and to receive gauze on other side shutters including projection type hinges with steel handle on both side shutters and steel peg stay ,complete with glazing bars complete all as specified and directed

S&F for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

S&F steel Ventilators with top hung shutters including hinges steel peg stay, complete all as specified and directed .

S & F galvanaised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for sheet glass 3mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M & L for preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide primer . complete all as specified and directed.

S&F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, 2nd class HW. complete all as specified and directed.

S&F of Mild Steel flat iron as in hold fast including tarring complete all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in hold fast and similar work. complete all as specified and directed.

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 10 mm bison panel complete all as specified and directed.

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying 2 coats of synthetic enamel paint over a coat of primers , complete all as specified and directed.

M&L for door stoper of aluminium alloy body rubber 140 mm long complete all as specified and directed.

S & F 18/19 mm thick Prelaminated Particle Board, interior grades, prelaminated one sides with decorative choice laminated & other sides balancing white lamination, fixed to screws to timber frame work complete all as specified and directed.

S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electro galvanised. complete all as specified and directed.

S&F for aluminium anodised 100mm hasp and staple, safety type, brass with mild steel hing pin incl bolt to hinge plate and fixed with screws. complete all as specified and directed.

S & F 100mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F 150mm long Aluminium anodised barrel tower bolt of extruded section . complete all as specified and directed.

S & F 200 mm long Aluminium anodised barrel tower bolt of extruded section . complete all as specified and directed.

S&F 100 mm length Aluminium handles fabricated type anodised complete all as specified and directed.

S&F 150 mm length Aluminium handles fabricated type anodised complete all as specified and directed.

S & F 100mm size mild Steel butt hinges medium weight cold rolled. complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21. complete all as specified and directed.

S & F 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F mild steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repairs anodised aluminium alloy curtain rail, chromium plated with fixing brackets, stops, roller etc complete all as specified and directed.

Taking up or down GI tubing 15mm dia. complete all as specified and directed.

Taking up or down GI tubing 20mm dia. complete all as specified and directed.

S&F GI tubing of 15mm bore medium grade with all fittings completely fixed to walls or laid in floors etc complete all as specified and directed.

S&F GI tubing of 20mm bore medium grade with all fittings completely fixed to walls or laid in floors etc., complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in base of water tank on roof surface complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed.

S&F 20mm ball valve high pressure with polythylene float valve and fly nut complete screwed for iron pipe PTMT complete all as specified and directed.

S&F Gun metal globe or gate valve 15mm , with iron wheel head screwed both ends for iron pipe and loud in repairs. complete all as specified and directed.

Demolition of Brickwork or stone / boulders masonry laid drybuilt in cement mortar complete all as specified and directed.

M&L Brick work with subclass B bricks, straight or curved on plan exc 6m mean redius built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement motor 1:4 complete all as specified and directed.

M&L hard core with broken stone or boulders of gauge n exc 63 mm deposited ,spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface. complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-1, using 20mm graded stone aggregates as in plinth protection finished fair and even with using extra cement. complete all as specified and directed.

M&L for 75 mm thick PCC 1:5:10, type E-2 by using 40 mm graded aggregate as in sub base floor . complete all as specified and directed.

M&L for chequered cement concrete desiner tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for 20 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and directed.

Material and labour polished cuddappa stone slab flooring thickness of stone slab varying from 20mm to 30 mm over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade the slab complete all as specified and directed.

S&F in repair Vitreous china squatting pan, Orissa pattern of size 580 x 440mm, white complete with integral foot rests and PVC low level flushing cistern of 10 Ltr capacity and PVC flush pipe and including provn of lime concrete bedding including CI 'P' trap 100mm complete all as specified and directed.

S&F in repair vitreous china white wash hand basin (flat back or angle back type) size 550x400mm white including brackets, pedestal, wast fittings brass chromium plated, CP waste cupling, 32mm dia, waste pipe, PVC connection 15 mm bore with PTMT nuts of length incl 15mm dia CP piller tap fancy type.complete all as specified and directed.

S&F CP Bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type fixed in repairs. complete all as specified and directed.

S&F CP Stop valves(conceled type) cast copper alloy,fancy type,with iong shank and cup, bore15mm, fixed in repairs. complete all as specified and directed.

S&F CP angle valves cast copper alloy,fancy type,with iong shank and cup, bore15mm, fixed in repairs. complete all as specified and directed.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and directed.

S&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete all as specified and directed.

S&F in repair of soap-dish chromium plated (Approximate size 160x160x90mm) complete all as specified and directed.

S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden and plastic cliet complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchan or laboratary with plugs washers and westes ,including bedding in cement mortar to drawft wall or including fixing cantilevers bracket and connecting union to pipe overall size 915mm x460 mm bowl size 410mmx 330mm x160 mm complete all as specified and directed.

Dismantling of cast iron drain pipe 100 mm dia from floor/walls etc and taking out of trenches/floors. complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall. complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) bends any redius with access door. complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door. complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) vent cowl. complete all as specified and directed.

Dismantling of cast iron drain pipe 75mmdia from floor/walls etc and taking out oftrenches/floors complete all as specified and directed.

S&F in repair 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) bends any redius with access door complete all as specified and directed.

S&F in repair75 mm PVC (SWR) branch piece, (double T) equal or unequal with access door complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/ power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified

Taking down the existing unserviceable main switch/cut out/DBs of any type /capacity /description as existing at site including making good the disturbed surfaces to match with the existing finishes all as directed.

M&L for point wiring with 1.5 sq mm copper conductor single core PVC insulated FRLS unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit and conduit accessories of 20mm dia medium grade ISI marked concealed in wall / ceiling / floor etc., including running up of 1.5 sq mm copper conductor PVC insulated FRLS cable as earth continuity conductor alongwith wiring and connecting to the common earth dolly complete all as specified for One light/bell point controlled by one, one way switch 5 Amps SP.

All as per item No.102 above but for One ceiling fan/exhaust fan point controlled by one, one way switch and regulator .

All as per item No.102 above but for one bell point controlled by one, one way switch, SP

All as per item No.102 above but for One 2/3 Pin 5 Amps switch socket out let point controlled by one switch on the same board.

All as per item No.102 above but for One 2/3 Pin 5 Amps switch socket out let point controlled by one switch on the Independent board.

All as per item No.102 above but for light point controlled by 2-way switches

All as per item No.102 above, but using 4.0 sq mm single core FRLS copper conductor cable, multistranded PVC insulated un-sheathed 1100 V grade for 5/15 Amps switch socket point including running up of 4.0 sq mm FRLS copper conductor PVC wire as earth continuity conductor alongwith wiring and connecting to the common earth dolly.

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.

Supply and fix switch socket combination flush type multipurpose 2/3 pin 5 Amps,230 Volts complete all as specified.

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 Amps,230 Volts complete all as specified and directed.

Supply and fix switch socket combination flush type miultipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified.

Supply and fix bell ding dong type AC 230 volts

S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 X 50 mm complete all as specified.

S&F sheet metal enclosure, vertical type MCB DB TPN 4 way, double door, with 200 Amps rated bus bar 415 Volts, suitable for and including 100 Amp, TP MCCB, 16 KA as incommer with magnetic locking system including painting by red-oxide one coat and powder coated complete all as specified and directed.

S&F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S&F MCB SP, 6-32 Amps, 230 Volts, 'C' curve, suitable for fixing in MCB DB's, 10KA breaking capacity, complete all as specified.

S&F MCB SP, 40-63 Amps, 240 Volts, 'C' curve, suitable for fixing in MCB DB's, 10KA breaking capacity, complete all as specified.

S&F MCB SPN, 40 Amps, 240 Volts, 'C' curve, suitable for fixing in MCB DB's, 10KA breaking capacity, complete all as specified.

S&F 18/20 W wall mounted box type LED tube light fittings along with integrated driver complete of Havells endura linear neo Cat Part No. BS20WLED865SPCWH OR equivalent make : Bajaj / Phillips / CG / Wipro

S& F Angle / Batten holder including LED lamp of 9 watt of insulated body with back plate for angle / batten fittings fixed with wooden round blocks complete all as specified and directed

M&L for sub main wiring with two runs of single core 6 sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of medium grade of 25 mm dia including one run of single core 6 sq mm PVC insulated unsheathed multistranded 1100 Volts grade copper conductor cable as earth continuity conductor alongwith the wiring and connected to common earth dolly including removing the existing unserviceable submain wiring and making good the disturbed surface to match with the existing surface complete all as specified and as directed. Note : 2 runs of 6 sq mm cable, one run of 6 sq mm earth continuity conductor and one run of conduit shall be measured as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cmx 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nuts, checknuts and washers etc., of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/main switch all as shown in Electrical Plate No.5 of SSR Part-I and connected to main switch board including excavation and earth work in hard dense soil, returning in and removal of surplus soil to a distance not exc 50m, PCC chamber in 1:2:4 Type B-1 using 20mm graded stone aggregate, 40mm thick RCC Cover in 1:2:4 type B-1 reinforced with XPM of weight not less than 4 Kg/Sqm and frame of angle iron 25 x 25 x 6 mm with lugs 2 Nos. and with 6mm dia MS bar handle made to shape, 20 mm dia light grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling, connection to test point made out of bronze/gun metal with fixing arrangement, funnel, wire mesh complete all as specified. (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5m length is deemed to be included in quoted rate.)

S&F Security light of 1x30 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and all as directed by Engg-in-charge make Havells endura pearls L30WLED757 SASY TOPCMP including provision of 2.5 sqmm 3 core multistranded copper conductor cale from light fitting to junction box and bracket made out of GI pipe 32mm dia bore not less than 1.2 mtr long and fixed on wall / poles with 2 Nos MS clamp made out of MS flat 40x5mm thick complete with MS nuts, bolts and washers etc complete all as specified and as directed Make: BAJAJ / PHILIPS/LUKER

S&F Steel body exhaust fan AC single phase 230/240 V of size 300mm sweep with louver complete including wall hole and bringing back old unserviceable exhust fan to store etc., all as specified and directed Make: HAVELLS / BAJAJ/ALMONARD

Disconnecting and removing ceiling fan of 1200/1400 mm sweep and wall mounted fan and exhauust fan from any height from electrical connections, bringing down, opening up, cleaning internally and externally , replacement of condensor, ball bearing, bushes, split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, replacement of minor worn out/defective parts, refixing in original position including minor repairs for smooth functioning and provision of new flexible wire of size 23 / 0.0076 multistranded copper conductor cable from ceiling rose to fan including testing on completeion all as specified and as directed. Note : (a) Replacement of unserviceable parts shall be measured and paid seperately. (b) PVC 2 core copper cable multistandrad of size 1.50 sqmm from ceiling fan deemed to be included in the rate quoted by the contractor (b) Labour element for replacing of unserviceable parts is deemed to be included in the rate quoted.

M&L for rewining out burnt ceiling fan of 1200/1400mm sweep motor with supper enameled copper wire of suitable size as per details given below of any make, type, model including transportation (inclusive of material & labour) complete all as specified and directed.

Supply only the following items at srl No. 129 to 132 suitable for ceiling fans / exhaust fans fo any size and sweep

(a) Sealed ball bearing

(b) Rubber bushes with MS clamps, bolt, nut and split pins

(c )Capacitor 2.5 Mfd / 4 Mfd capacity 240 Volts

(d)GI fan down rods of 4 feet height

S&F SPN sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed

S&F 2 way switch, 5 Amps capacity 230 volts, all as specified and directed.

S&F ceiling fan regulator step type AC 240 volt suitable for 1200/1400 sweep complete all as specified and directed.

S&F bell push button single pole 230 V, all as specified and directed.

Supply, laying, fixing on wall/on pole/in ground or passing through pipe, 1100 Volts grade heavy duty cable with XLPE insulation stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 3.5 core 25 sq mm nominal cross section including jointing and testing complete all as directed . Note: Excavation, earth work, GI Protection Pipe, PCC covers & sand shall be measured and paid separately under respective items.

Excavation in trenches not exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundations of man holes, laying of poles/stays/cable etc., n.exc. 10Sqm on plan and getting out in hard/dense soil complete all as specified and as directed

Supply, spread river sand of approval in cable trenches providing for cable cushioning all as specified and directed. NOTE: Punned thickness of sand only will be measured and paid.

Removal of surplus soil to a distance not exc 50 mtrs away and depositing where directed at a level not exc 1.5 mtr above starting point complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each in soils all as specified and as directed.

S& Lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm all as specified and as directed.

M&K for cutting the existing PCC/BT road for laying of pipe lines/ cable 30 cm width and not exceeding 60 cm depth, getting out and making good the disturbed surface to match with existing surface all as specified and directed

S & Lay GI tubing 40mm dia light grade in protection of cable at roads crossing/hard standing/pole proctection fixed with clamps as per site requirement etc all as specified and directed.

MAHALAKSHMI INFRA PROJECTS

ATUL ENTERPRISES

LAKSHMI ENGINEERS

STANDARD AGENCIES

G.CHANDRIAH AND SONS