Impr. of two lane Ambajogai Ghatnandur Ahmedpur Thodga Mogha Sindgi to Dist. Border road, SH-56, Km.183/00 to 195/00, Tq.Ahmedpur, Dist. Latur

Amount

PART – A (Work Portion)

ITEM No. 1 :- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts and leads and spreading for embankment or stacking as directed. By Mechanical Means.

1) B. T. road

2) Cement Concrete road

ITEM No. 2 :- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - By Mix in Place Method and Grading - I Material. (Material including all lead and lifts)

1) B. T. road

2) Cement Concrete road

ITEM No. 3 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 millimetre) Aggregate). (Material including all lead and lifts)

1) B. T. road

ITEM No. 4 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 millimetre) Aggregate (Material including all lead and lifts).

1) B. T. road

2) Cement Concrete road

6) Approaches

ITEM No. 5 :- Providing and laying a fibre glass geogrid of Tensile strength 50 kN/m manufactured from high quality glass fibre strands and coated with a polymer modified bitumen as reinforcement to Asphalt overlay flexible pavements and Asphalt over distressed rigid P.C.C. (Material including all lead and lifts).

1) B. T. road

ITEM No. 6 :- Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at the rate of 2 Kilogram per Square Metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete including picking of existing Water Bound Macadam surface. (Material including all lead and lifts)

A) B. T. road

ITEM No. 7 :- Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting), heating and spraying the bitumen of VG-30 grade @ 2 kilogram per square metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 Metric Tonne to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete, including applying tack coat of VG 30 grade bitumen at the rate of 0.30 Kilogram per square metre on existing bitumen surface. (Material including all lead and lifts)

1) B. T. road

ITEM No. 8 :- Providing and constructing 50 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting), heating and spraying the bitumen of VG-30 @ 1.75 kilogram per Square metre, spreading 12 millimetre size chips compacting with Static roller having weight 8 to 10 MT to achieve the desired degree of compaction as per Technical Specification Clause 506 etcetera complete, including applying tack coat of bitumen VG-10 at the rate of 0.30 Kilogram per Square metre (on existing bitumen surface.) (Material including all lead and lifts)

1) B. T. road

ITEM No. 9 :- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 Kilogram per 10 Square Metre, VG-30 bulk bitumen. (Material including all lead and lifts)

1) B. T. road

ITEM No. 10 :- BITUMINOUS MACADAM :- Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction for 80 / 100 millimetre compacted thickness with Drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27: 2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate fedder, built-in dust controller system and PLC for Drum Mix plant, Sensor paver, and Vibratory roller excluding prime / Tack coat etcetera complete. Using Bitumen VG-30 grade 3.30 %. (Material including all lead and lifts)

1) B. T. road

ITEM No. 11 :- Open Graded Premix Surfacing – Providing and Laying OGC 20 millimetre thickness composed of 13.2 millimetre to 5.6 millimetre aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction including providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 Kilogram per 10 Square Metre and excluding Seal coat. Using VG-30 bulk bitumen –USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller. (Material including all lead and lifts).

1) B. T. road

ITEM No. 12 :- Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen at the rate of 0.98 Kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne etcetera complete. (Material including all lead and lifts)

1) B. T. road

ITEM No. 13 :- Supplying hard murum / kankar at the road side, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

1) B. T. road

2) Cement Concrete Road

6) Approaches

ITEM No. 14 :- Spreading hard murum/ soft murum/ gravel or kankar for side width complete.

1) B. T. road

2) Cement Concrete Road

6) Approaches

ITEM No. 15 :- Compacting the hard murum side widths including laying in layers on each side with Vibratory roller including artificial watering etcetera complete.

1) B. T. road

2) Cement Concrete Road

6) Approaches

ITEM No. 16 :- Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils, by Mechanical Means.

1) B. T. road

ITEM No. 17 :- Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre, not less than 97% of standard Proctor density after laying them in layers of 20 centimetre to 30 centimetre with Power roller.

1) B. T. road

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 18 :- Providing earth work in embankment with approved materials obtained from departmental land with all lifts and leads, including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density etcetera complete. (Material including all lead and lifts)

1) B. T. road

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

6) Approaches

ITEM No. 19 :- Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 millimetre manually including loading of dismantled material to transport vehicle at site excluding lead charges.

2) Cement Concrete road

ITEM No. 20 :- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 millimetre, cement content not to be less than 150 Kilogram per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete. (Material including all lead and lifts)

2) Cement Concrete road

ITEM No. 21 :- Providing and laying in-situ M-30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS-383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound / by providing cement vata in cement Mortar 1:8 at the rate of 0.6 metre X 0.6 metre centre to centre, admeasuring 80 millimetre at bottom and 40 millimetre at top with depth of 75 millimetre and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. (Material including all lead and lifts)

2) Cement Concrete road

ITEM No. 22 :- Cutting transverse contraction joints 3 to 4 millimetre wide and depth 60 millimetre in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etcetera complete including subsequent widening of the groove 8 to 10 millimetre wide at top having depth of 15 millimetre as directed by Engineer in charge. (Material including all lead and lifts)

2) Cement Concrete road

ITEM No. 23 :- Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 millimetre diameter 70 centimetre long and at 30.00 centimetre centre to centre and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of TMT FE 500, chairs with proper alignment etcetera complete.

2) Cement Concrete road

ITEM No. 24 :- Providing and fixing in position TMT FE 500, 25 millimetre diametre dowel bars precoated with anticorrosive epoxy paint of required diametre 60 centimetres long and at 30.00 centimetre centre to centre and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etcetera complete.

2) Cement Concrete road

ITEM No. 25 :- Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

2) Cement Concrete road

ITEM No. 26 :- Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etcetera

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

7) C.D. works

ITEM No. 27 :- Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etcetera complete.

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 28 :- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 29 :- Excavation for foundation in hard murum and boulders including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete.

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 30 :- Excavation for foundation in soft rock including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete.

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 31 :- Excavation for foundation in hard rock by controlled blasting including shoring and strutting as necessary and disposing off excavated stuff as directed etcetera complete.

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 32 :- Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthen bunds etcetera as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etcetera complete. (Prior approval of Superintending Engineer will be necessary)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 33 :- Providing and laying in situ / ready mix / ready mix M-10 cement concrete of trap / granite / quartzite / gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural / artificial sand) (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 34 :- Providing and filling annular space around footing in rock by using concrete of M-15 grade etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 35 :- Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etcetera including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailing out water and curing finishing in cement mortar 1:3 etcetera complete as directed by engineer in charge basic rate shall be increased for height above 5.00 metre in following manners (With Concrete Mixer) With fine aggregates of required specifications (VSI sand finely washed etcetera). (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 36 :- Providing and laying plain in situ / ready mix M-20 cement concrete of trap/ granite / quartzite / gneiss / crushed stone metal mechanically mixed, placed in foundation and compacted by vibration including necessary bailing out water, curing curing concrete batch mix plant / pan mixer with fine aggregates of required specifications ( VSI sand finely washed etcetera ) (excluding dewatering by pump) for 14 days Reinforced cement concrete Grade. With Concrete Mixer. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 37 :- Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / granite / quartzite / gneiss metal for reinforced cement concrete caps over piers and abutments including necessary scaffolding plywood / steel formwork, compacting by vibrating, finishing in cement mortar 1:3 and curing etc complete (Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer). with fine aggregates of required specifications (VSI sand finely washed etcetera). (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 38 :- Providing and laying in situ / ready mix M-30 controlled cement concrete of trap / granite / quartzite/ gneiss metal for reinforced cement concrete work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine aggregates of required specifications (VSI sand finely washed etcetera). (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 39 :- Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all reinforced cement concrete works as per detailed drawings etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 40 :- Providing expansion joints with 25 millimetre thick bituminous pad as per detailed drawings etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 41 :- Providing tar paper bearing including laying in proper position etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 42 :- Providing and laying in situ / ready mix M-20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etcetera complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 43 :- Providing vent holes 100 millimetre diameter GI pipe in the slab and wearing course with iron grill at the top and Galvanised Iron pipe at bottom as per drawing etcetera complete.

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 44 :- Providing and fixing stream lined M-15 grade Reinforced Cement Concrete guard stone including mild steel bar reinforcement etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

6) Approaches

7) C.D. Works

ITEM No. 45 :- Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 46 :- Providing and laying in situ / ready mix M-20 CC of trap/ granite/quartzite/ gneiss metal for wearing course 8 centimetre thick including compacting, finishing, curing and filling in joints with bitumen etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 47 :- Providing trap/ granite/ quartzite/ gneiss rubble filling over haunches and arches including hand packing etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 48 :- Providing and fixing pressure relief pipes of 110 millimetre diametre of PVC as per drawing for reinforced cement concrete Raft, galaries returns, abutments, wing wall etcetera complete.

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 49 :- Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50 metres to 300 metres inclusive from the site of excavation to the site of deposition as directed.

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 50 :- Providing railing of mild steel angle post 2.0 metre center to center of section 75 millimetre X 75 millimetre X 10 millimetre or equivalent I/C section of height 1.05 metre above bridge surface with minimum anchor length of 30 centimetre including hold fast of 25 millimetre diameter mild steel bar welded at the bottom and concreting of 1:3:6 of size 30 centimetre x 30 centimetre x 30 centimetre with three rows of 40 millimetre B class Galvanised Iron pipe provided at 30 centimetre on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etcetera complete. (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 51 :- Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite / quartzite / gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood / steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade). (Material including all lead and lifts)

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

ITEM No. 52 :- Providing dry rubble stone pitching 23 centimetre (about 9) thick including all material, quarry spalls, labour etcetera complete. (Material including all lead and lifts)

6) Approaches

ITEM No. 53 :- Laying cement concrete pipe of IS 458:2003 NP-2 class of 1000 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete.

6) Approaches

ITEM No. 54 :- Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 metre ) By Mechanical Means.

7) C.D. Works

ITEM No. 55 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete. (Material including all lead and lifts).

7) C.D. Works

ITEM No. 56 :- Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite / gneiss metal in foundation including necessary form work, compacting and curing etcetera complete. (with reversible drum type mixer / concrete batch mix plant (pan mixer)) with SCADA with Natural / VSI standard Artificial Sand) (Material including all lead and lifts)

7) C.D. Works

ITEM No. 57 :- Providing cast in situ / ready mix M-20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) (Material including all lead and lifts).

7) C.D. Works

ITEM No. 58 :- Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 1000 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. . (Material including all lead and lifts).

7) C.D. Works

ITEM No. 59 :- Providing cast in situ / ready mix block of M-10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine aggregates of required specifications (VSI sand finely washed etcetera), cement 4.40 bags per cubic metre. . (Material including all lead and lifts).

7) C.D. Works

7) C.D. Works

3) Thodga Bridge

3) Thodga Bridge

4) Mogha Bridge

5) Sindgi Bridge

8) Road Furniture

ITEM No. 62 :- Providing and fixing Cautionary / Warning sign boards in Equilateral Triangle size of 600 millimetre made out of 1.50 millimetre aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive / heat activated adhesive retro-reflective specified back ground, border and back side retro-reflective symbols, letters, numerals, arrow as per IRC : 67-2012 Table No 8.3 Supported with back support frame 25 millimetre X 25 millimetre X 3 millimetre, duly painted on back side with grey stove enamel paint and supported on one number of Mild Steel angle iron post of size 65 millimetre X 65 millimetre X 6 millimetre, 3.45 metre long, duly painted with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures etcetera; fixing the boards in M25 grade concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including transportation etcetera complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor / convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor / supplier. (Material including all lead and lifts)

8) Road Furniture

ITEM No. 63 :- Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.50 millimetre thick including reflectorizing glass beads @ 250 grams per Square Metre area, thickness of 2.5 millimetre is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete.

8) Furniture

ITEM No. 64 :- Providing and fixing road junction/information sign boards of size 1.80 X 0.90 Meter prepared 16 guage mild steel sheet on frame of mild steel angle of size 35 X 35 X 5 millimetre with cross bracing of size 35 X 35 X 5 millimetre including painting with one coat of zinc cromate stoving primer and two coats each of green / white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 65 X 65 X 6 millimetre of 3.65 metre long inflated at bottom, drilled on top and painted in white and black bands of 30 centimetre with 4 numbers high strength Galvanised iron bolts and nuts of size 10 millimetre diametre and 20 millimetre long. Sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre X 60 centimetre X 75 centimetre size as directed by Engineer-in- charge etcetera complete. Mild Steel Board with Engineering Grade. (Material including all lead and lifts)

8) Road Furniture

ITEM No. 65 :- Painting Line, Dashes, Arrows etcetera on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Over 10 centimetre Wide on New Surface), (MORTH-803). (Material including all lead and lifts)

8) Road Furniture

ITEM No. 66 :- Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 Kilogram tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/ 33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 millimetre, 100 millimetre and 102 +/- 2 millimetre and with minimum reflective area of 13 Sq.Cm. on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 millimetre and height not less than 30+/- 2 millimetre) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (Material including all lead and lifts)

8) Road Furniture

ITEM No. 67 :- Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 centimetre high above ground level, painted black and white in 15 centimetre wide strips, fitted with 80 X 100 millimetre rectangular or 75 millimetre diametre Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and the drawings. (Material including all lead and lifts)

8) Road Furniture

ITEM No. 68 :- Metal Beam Crash Barrier - Type - B, THRIE : Metal Beam Crash Barrier (Providing and erecting a Thrie metal beam crash barrier comprising of 3 millimetre thick corrugated sheet metal beam rail, 85 centimetre above road/ground level, fixed on ISMC series channel vertical post, 150 X 75 X 5 millimetre spaced 2 metre centre to centre, 2 metre high with 1.15 metre below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 X 75 X 5 millimetre, 546 millimetre long complete as per clause 810). (Material including all lead and lifts)

8) Road Furniture

ITEM No. 69 :- Cutting down trees including trunks and branches with girths above 30 centimetre to 60 centimetre and stacking the materials neatly with all lifts and lead of 1000 metre as directed and earth filling in the depression / pit if any.

1) B. T. road

ITEM No. 70 :- Deduct charges for cutting down tress including trunks and branches for fire wood cleaning neatly with all lifts and leads as directed by Engineer in charge.

1) B. T. road

ITEM No. 71 :- Clearing grass and removal of rubbish for all leads outside the periphery of the area.

1) B. T. road

ITEM No. 72 :- Providing Reinforced Cement Concrete 1:2:4 ordinary Kilometre stones including painting, numbering, etcetera complete for National Highway and State Highway and Major District Road as per IRC design for Highway Kilometre stones and fixing in standard size Cement Concrete 1:4:8 block etcetera complete. (Material including all lead and lifts)

1) B. T. road

ITEM No. 73 :- Providing and fixing 200 metre stone as per IRC design including painting, numbering, fixing in 150 millimetre X 150 millimetre X 900 millimetre standard size cement concrete 1:4:8 block etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

1) B. T. road

Sharda Construction and Corporation Pvt Ltd