REPIRS TO SUNKEN FLOOR, VERTICAL STACKS, SANITARY FITTINGS AND CONNECTED WORKS AT B, C JCOS AND ORS TYPE QTRS IN ZONE A AREA AT DRDO TOWNSHIP KANCHANBAGH UNDER AGE B/R-I, HYDERABAD

Amount

Note:- (Work shall be carried out upto G+1 and G+3 storey bldg, contractor to quote rates accordingly).necessary scafolding wherever required shallbe deemed to be included in the Quoted rates.

Digging out and removing sunken filling and depositing the same at a distance

M & L for plain cement concrete 1:5:10 type E2 (Using 40mm graded stone aggregate ) as in filling of sunken floors complete all as specified and directed.

M & L 10mm thick rendering on concrete/brick surface in CM 1:4 duly mixed with water proofing compound @ 2% by the weight of cement and finished even and smooth without using extra cement complete all as specofied and directed. Note: water proofing compound shall be mesured and paid seperately.

Supply onle water proofing compound complete all as specified and directed.

M&L for applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1mm, 1st Coat (Nitobond SBR Chemical 1 ltr, Water 2 Ltrs, Cement 3 Kg) Second Coat (Nitobond SBR Chemical 1 ltr, Cement 3 Kg) applied thoroughly without any traces of dirt or laitance as in sunken floors complete all as directed.

S&F PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall includng dismantling of old unserviceable PVC pipe complete all as directed.

S&F PVC (SWR) bends 110mm bore complete includng dismantling of old unserviceable PVC bends complete all as directed.

S&F for PVC (SWR) branch piece of bore size 110mm bore , single (single Y) equal or unequal

S&F for PVC (SWR) junction single of bore 110mm bore , (Single T) equal or unequal provided with access door

S&F for PVC (SWR) bends any radius bore size 110mm.

S&F for PVC (SWR) vent cowl 110 mm bore size

S&F for PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to wall includng dismantling of old unserviceable PVC pipe complete all as directed.

S&F for PVC (SWR) branch piece of bore size 75 mm , single (single Y) equal or unequal

S&F for PVC (SWR) junction single of bore size 75 mm , (Single T) equal or unequal provided with access door

S&F for PVC (SWR) bends any radius bore size 75mm.

S&F for PVC (SWR) vent cowl bore size 75 mm

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair SGSW gully trap square or round mouthed type 'P' of size 150mm x 150mm with CI grating including raising upto plinth protection with PCC 1:2:4 type B-1, and covered precast manhole cover with frame complete all as specified and directed.

S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 630mm x 450mm with integral foot rests ( excluding flushing cistern and flush pipe ) complete including connection to trap and flushing pipe antisyphonage pipe etc complete all as specified & as directed.

S&F in repairs vitreous china wash basin, white, flat back of size 600 x 480mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Taking down cement plaster on bricks/ concrete surfacses including raking out joints, hacking for keys, scrubbing down with water etc to receive new plaster.

M&L for rendering (10mm +5mm ) thick in two layer,cement plaster on wall in CM (1:4) finished fair and even with water proofing compound @ 2% by the weight of cementand all as specified and directed by Engr-in Charge.

Supply only Integral waterproofing compound

M&L for rendering 15mm thick cement plaster on wall in CM (1:6) finished fair and even and all as specified and directed by Engr-in Charge.

M&L for rendering 10mm thick cement plaster on ceiling in CM (1:3) rendering is to be finished even and smooth (without using extra lime or cement) all as specified and directed by Engr-in Charge.

M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation of surfaces.

M & L for two coat of distemper oil emultion over a coat of chalk whiting primer including preparation of newly plastered surfaces of walls complete all as specified.

Material & Labour Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work, including preparation of surfaces.(Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 20 mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed bed complete all as directed.

M&L for glazed ceramic tiles of size 450x300x7mm thick vertical surfaces such as skirting/dado jointed in neat cement slurry and pointed with white or coloured cement to match the colour of the tiles laid on and including 10mm thick rendering in cement mortar 1:4 as backing coat including dismantling existing tiles along with a backing coat complete all as directed.

M&L non skid ceramic coloured rectified tiles 7 to 8 mm thick (square/ rectangular) first quality area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15 mm thick screed bed in cement mortar 1:6 including dismantling existing tiles with screed complete all as directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) first quality area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in skirting etc jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick screed bed in cement mortar 1:4 including dismantling existing tiles with screed bed complete all as directed.

S&F in repair for 100mm stack clamps made out of 50mm x 5mm flat iron and 15mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof .

S&F in repair for 75mm stack clamps made out of 50mm x 5mm flat iron and 15mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof .

Material & Labour for complete removal of existing treatment, external plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm.

Complete removal of trees/plants, upto roots growth on bldg's roofs, chajjas, at junctions of pipe line fixed on walls and walls coming on bldgs and removing the material (Branches and plants ) to a distance n.exc 50m complete all as directed

Repairs to leakage from CI pipes line joints of 75/100 mm dia by using eye pieces, rubber seal, cement including removal of loose material etc in the leakage portion complete all as specified and directed.

S&F for 50mm dia GI pipe heavy class spouts pipe complete all as specified and directed by Engineer-in-Charge.

Supply and Laying of CPVC Pipes 16mm dia & fittings on walls/ceiling or laying in floors complete all fiitings as specified

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F in repairs 10 ltrs capacity PVC flushing cistern high/low level with inlet, ball valve, float, handle including fitting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the existing fittings complete all as directed.

S&F in repairs 15mm dia bib tap, short body, standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 105gms) complete all as directed.

S&F in repairs 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as directed.

S&F in repairs 15mm dia pillar tap fancty type standard of PTMT, any colour, high pressure, screwed for iron pipe (minimum weight 120gms) complete all as directed.

J.V.V.K.PRABHAKARARAO (BID ID -3313762)

SUN LIGHT HOUSE (BID ID -3314468)

SRI SAI ENTERPRISES (BID ID -3313757)

CSR CONSTRUCTIONS (BID ID -3313718)

Anjana corporation (BID ID -3313608)

UNITY ENGINEERING TRADERS (BID ID -3313657)

M/s K Venkateswara Rao (BID ID -3313982)