SPECIAL REPAIR TO MAIN OFFICE BLDG NO 23 OF NCC DTE (AP AND T) AT MUDFORT AND SPECIAL REPAIRS TO BLDG NO I (DPDO, SECUNDERABAD) UNDER AGE B/R (SOUTH) NO II AND AGE E/M (SOUTH) OF GE (SOUTH) SECUNDERABAD

Amount

Supply only integral water proofing compound of approved brand.

Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radins built in cement mortar 1:6 all as specified and as directed

Taking down old shutters of any description exc. 1sq.m and not exc. 2sq.m each, easing, adjusting and refixing in same opening complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frame) all as specified and as directed

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frame) all as specified and as directed

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 35mm 2nd class hard wood plain framed factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and tile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified.

M & L second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S & F 250mm long aluminium alloy anodised sliding door bolt with hasp, stable and fixing bolts and clips.

S&F 100mm size, stainless steel butt hinges complete all as specified and directed.

S & F 100mm long MS butt hinges, medium weight cold rolled. all as specified and as directed

S&F 100mm size extruded aluminium alloy handles, fabricated type.

S & F aluminium handle 150mm fabricated type complete all as specified and directed.

S & F 100 mm long mild steel, barrel tower bolts stove enamelled black, with bright bolt complete.

S & F aluminium anodised barrel tower bolts 150mm of extruded section complete all as specified and directed.

S&F CP brass towel rail 20mm dia 60cm long incl bracket fency type heavy weight as approved by Engr-in-charge

S&F mild steel framed work as in roof trusses , purlins crane, gantries rails, and heavy brackets framing (beam,tee,angle,channl, or flat sections ) etc including one shop coat of primer compete all as directed by Engr-in charge

S&F anodised aluminium snap grid of size 605mm x 605mm, frame work for false ceiling of aluminium section 23.5 x 23.5 x 1.60mm thick complete all as specified and directed.

S&F factory made steel ventilator with top hung shutter incl hinges, steel peg stay including one coat of red oxide primer complete.

S&F MS framed work such as grills, guard bars of window and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) including one coat of red oxide primer.

S&F40mm x6mm MS flat iron flllets wind ties for roof including screwing bolts complete

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed

M & L for fixing GI frame work 600mm x 600mm snap grid (Bottum pre coated) for exposed metal frame ceiling comprising of GI perimeter wall angle 25 x 25 x 0.7mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre and intermediate GI 3600mm long main 'T' 25mm web x 35mm flange x 0.7 mm thick suspended from soffit at 1200 mm centre to centre and inserting/fixing to main 1200 long cross 'T' 25mm web x 35mm flange x 0./7mm thick to for 600 x 600 grid with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 thickness having kuried web of 50mm and flange of 26 mm each with clips of 10.5 mm fixed to the main 'T' with connecting clips across the intermediate 'T at 600mm centre to centre. all as specified and directed.

M&L priming the plastered roof surfaces with bitumenous primer @0.30 Kg per sqm and applyingn APP based polymeric membrane minium weighing 3 kg per sqm and 3mm thick reinforced with polyster non wove fabric (Wt no less than 150 gms/ per sqm) and on primed surfaces by forced application over apply hot bitumen 1.2 Kg/Sqm (80/100) over applying bitumen base aluminium paint 200 grm/Sqm complete all as specified and directed

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping with two corrugution side lap, tapping screws as .all as specifiled and directed.by Engr -in-charge.

S&F Pre painted galvlume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping, tapping screws as .all as specifiled and directed.by Engr -in-charge.

Taking down rain water pipes of any description any pattern incl fittings heads, shoes, bends etc

M&L for 4mm thick asbestos cement plain building boards, fixed in ceilings, flat complete all as specified and directed.

M & L for exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid (frame work for ceiling shall be measured and paid separately). all as specified and directed.

Removal/ roughening of old treatment of any description and roughening the surfaces of old concrete roof surfacs by picking, sweeping clean and washing with water to remove dust etc including removal of old treatment of any description and removing the debris to a distance of n.exc 50mtrs away from plinth protection. all as specified and as directed

M&L for 40mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in roof floors, where required over slabs including necessary form work work and finishing the exposed surfaces fair even without using extra cement completen all as specified and directed

Dismantling floor, hearth wall tiling incld cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, windows-cills, cooking platforms, WHB counter and smiliar work like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as per directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as steps, cooking plateform, and other similar situations complete all as specified and directed.

M&L for light shade Vitrified ceramic tiles 10 mm thick (squre/rectangular) polished area of each tile exceeding 0.18 Sqm and not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15mm thick screed bed on CM 1:6 all as specified and directed by Engr-in-Charge.

M&L for coloured non skid ceramic joint free tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M & L Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colouired cement to match including 15mm thick screed bed in CM 1:6. all as specified and as directed

M&L for Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick over 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed by Engr-in-Charge.

M & L glazed ceramic tiles in vertical surfaces such as skirtings, dados and risers to steps etc 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4 all as specified and as directed

M & L 75 mm thick PCC type B-2 (1:2:4) using 40mm graded stone aggregate. complete all as specified and directed.

S&F glass dividing stirp 3 mm thick 38mm wide complete all as specified and directed.

Taking down cement plaster/terrazzo finish on brick/RCC/stone wallsof any description including racking out joints hacking for keys scrubbing down with water etc, complete all as specified and as directed.

M & L for rendering 15mm thick on brick masonry surfaces or concrete surfaces in CM 1:4 including finished the surface even and smooth without using extra cement.complete all as specified and directed.

M&L for rendering cement plaster, 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed.

M&L for rendering cement plaster 10 mm thick in cement mortar 1:3 on fair faces of concrete in ceiling, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M & L 10mm thick rendering in CM 1:4 uisng water proofing compound at the rate of 3% weight of cement over concrete surfaces all as specified and as directed .

Taking down cement/lime plaster on ceiling and M&L for rendering 10mm thick on ceiling surfaces in CM 1:4 including finished the surface even and smooth without using extra cement.complete all as specified and directed.

M&L Preparatioin of old painted Steel surfaces of any description not other wise described over 10CM width or girth and applying two coats of synthetic enamel paint all as specified and directed.

M & L 2mm thick wall care putty on wall all as specified and directed.

M & L three coats of white wash on walls including preparation of new surfaces all as specified and directed.

M&L for preparing new / old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for two coat of oil bound distemper on new surface of walls including removal of existing finish, scrapping and making good surfaces with two coats birla white putty all as specified and directed.

M&L for two coat OBD over wall cae putty on old surface of walls including removal of existing finish, scrapping and making good s all as specified and directed

M & L preparing of new plastered surfaces of celing and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M & L preparing of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L Complete removal of existing treatment on walls and applying two coats of OBD over a coat of alkali resistant primer complete all as speciried and directed.

M&L Complete removal of existing treatment on ceilings and applying two coats of OBD over a coat of alkali resistant primer complete all as speciried and directed.

M&L for complete removal of existing treatment on old plastered or un-plastered surfaces of wall and applying two coats of cement base paint on over a coat of primer on walls all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L preparing of new plastered or unplastered surfaces of walls and applying two coat of colour wash to walls complete all as specified and directed.

M & L preparing of plastered or unplastered old decorated surfaces and applying one coat of colour wash to walls complete all as specified and directed.

M & L preparation of plastered old decorated surraces and applying one coat of exterior emulsion (ACE paint) to walls complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes.

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squqren exc 05sqm each pane

M & L preparation of old wooden surfaces apply one coat of synthetic enamel paint, of any description , not other wise described, over 10cm width or girth

M&L Preparatioin of old painted wooden surfaces of any description not other wise described over 10CM width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed .

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repair vitreous china table top wash hand basin size 420 x 420 x 135mm including CP waste coupling (make : Jaquar cat part No ARS-WHT- 39901) or its equivalent complete all as specified and directed.

S&F CP WHB hole bidet mixer (hot and cold water) with popup waste system with 300mm long braided hoses including all necessary fitting. (Make Jaquar) cart part No JPL-BPL-JAO11) or its equivalent complete all as specified and directed.

S&F stainless steel structure, 3 adjustable vertical jets (square) integrated shower head (8" square) thermostatic mixer with diverter, hand shower with flexble hose, button spout, connecting hose, including all necessary fittings (Make: jaquar cat part No JPL-BKL-JA011) or its equivalent complete all as specified and directed)

S&F CP angle stop cock with wall flange copper alloy, fancy type, bore 15mm fixed in repairs. (Make jaquar cat part No FON-40053) complete all as specified and directed.

S&F CP two way bib taps with wall flange dia 15mm, fancy type fixed in repairs. (Make jaquar cat part No LYR-38041) or its equivalent complete all as specified and directed

S&F for CP health fauset fixed in repair (Make jaquar) cat part No ALD-565) or its equivalent complete all as specified and directed

S&F CP towel rack 600 mm long with lower hangers fancy type fixed in repairs. (Make jaquar ) cat part No CAN-1181N) or its equivalent complete all specified and directed

S&F glass shelf 600 mm long fancy type chromium plated (Make Jaquar Cat Part No A CN - 1171N ) or its equivalent complete all as specified and directed

S&F soap dispenser with metallic bottle long fancy typoe chromium plated (Make jaquar cat part No A CN-1137N) or its equivalent complete all as specified and directed

S&F tumbler holder fancy type chromium plated (Make jaquar cat part No AQN-7741) or its equivalent complete all as specified and directed

S&F double arm wall mounted reversible plain/magnifying (X3) pivotal mirror (make jaquar cat part No CAN-1193N) or its equivalent complete all as specified and directed

S&F corner glass shelf (with bracket) fancy type chrfomium plated (Make jaquar cat part No CAN-1173) or its equivalent complete all as specified and directed

S&F CP towel ring round with round flange (Make jaquar cat part No CAN-1121N) or its equivalent complete all as specified and directed

S&F CP toilet roll holder with flap fancy type. (Make jaquar cat pat No CAN 1153N) or its equivalent complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S & F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall/

S & F 110mm PVC (SWR) bends any radius with access door. all as specified and directed.

S&F 110mm bore PVC (SWR) plain bends, any radius complete all as specified and directed.

S & F 110mm PVC (SWR) branch piece (single T) equal or unequal with access door. all as specified and directed.

S & F 75mm dia, PVC (SWR) floor trap, plain with grating including joiting with solvent cement in repair complete all as specified and as directed.

S & F 75mm PVC (SWR) bends any radius with access door. all as specified and directed.

S & F 75mm PVC (SWR) branch piece, (Single T) equal or unequal with access door. all as specified and directed.

Taking up or down steel tubing 15 mm dia and connections complete all as specified and directed for the following bores of pipe

Taking up or down steel tubing 20 mm dia and connections complete all as specified and directed for the following bores of pipe

S&F 15 mm dia steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed for the following bores of pipe:-

S&F 20 mm dia steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed for the following bores of pipe:-

Refixing old serviceable steel tubing 15 mm dia and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed for the following bores of pipe:-

Refixing old serviceable steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors etc) complete all as specified and directed for the following bores of pipe:-

Dismantaling water tanks of capacity 1000 litres complete all as specified and directed.

Dismantaling water tanks of capacity 500 litres complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 500 Ltr capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical verticle with closed top) hoisfed and fixed in position including taking down old one all as directed.all as specified and directed by Engineer in charge.

S&F 20 mm dia brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions for 32mm bore of pipe complete all as specified and directed.

S&F 450 mm long, PVC connection with PTMT nuts for 15 mm bore of pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), coloured, including connection to drain and flushing pipe, plastic seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

M&L for 75mm dia cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for 75mm dia cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B1(1:2:4 )

S&F in repairs, vitreous china wash basin, white, flat back of size 550mm x 400mm including waste pipe, brackets and grouted in CM 1:2 in wall complete all as specified and directed.

S & F vitreous china was basin, white flat back, size 550x400mm with brackets, including cutting for and pinning in ends of brackets including waste fittings PTMT 32mm dia and pillar taps of PTMT 15mm dia complete.

S&F in repairs, 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed

S&F in repairs 32mm waste fittings brass chromi-um plated for glazed ware basin etc with long screwed shanks and fly nuts flange end complete ISI marked

M&L for Bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule and fixed in repairs.

S&F in repairs pillar taps 15mm bore cast copper alloy with capstan heads chromium plated scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe . ISI marked

S&F in repairs gratings square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.

S&F soap dish chormium plated (Approx size 160 x 160 x 90mm) all as specified and directed

S&F corner shelf of PTMT fixed with and including chromium plated brass screws and wooden and plastic clit

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws (minium wt 105 gms) complete all specified and directed

S&F towel ring of PTMT fixed with and including chromium plaed brass scrwes and (min wt 105 gms) complete all specified and directed

Removal of blockage/chocked up material obstructing the flow from sewage line of 75/100 mm bore, by rodding with rods/ wooden kempti/chock remover to give easy and continuous flow between two manholes complete all as specified and directed. (Note:- The clear distance between two manholes shall be measured)

Removal of blockage/chocked up material obstructing the flow from sewage line of 150 mm bore, by rodding with rods/ wooden kempti/chock remover to give easy and continuous flow between two manholes complete all as specified and directed. (Note:- The clear distance between two manholes shall be measured)

S & F in repairs, vitreous china squatting pan, Orissa pattern size 580x440mm white, with integral foot rests & including fixing only cistern and flush pipe and including concrete bedding and including CI 'P' trap, 100mm supply and fix in repairs PVC low level flushing cistern 10 litres capacity (Make:- Parryware slimline) complete all as specified.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) including valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle of 10 ltrs capacity complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device and flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern complete all as specified and directed.

S&F 300 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F in repairs 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S & F in repairs, 15mm bore, stop valves, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe.

Demolition of brick work or stone boulders masonry built in Cement mortar (or) cement lime mortor including all quions, arches, pillars etc all as specified and as directed .

Demolition of cement concrete in roof /floors (other than ground floor) and removing debris to a distance of n exc 100M away from the bldg

Dismantling timber scantling 40 sq cm & over in section , any position in unframed work.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of mangalore pattern roofing tiles with ceiling tiles or slate roof covering including ridges.all as specified and directed .

Demolition of PCC ground floors & pavings exc 15cm thickness but above ground floors (unreinforced) complete all as specified and directed.

Dismantling of cast iron drain pipe 100mm dia from floor/walls etc and taking out of trenches/floors. all as specified and directed.

Dismantling of cast iron drain pipe 75mm dia from floor/walls etc and taking out of trenches/floors. all as specified and directed.

Removing building materials etc, (other than spoil payable under items 99 to 102 in Section 3-Earthwork) to a distance exc 1.0 km but n.exc 5.0 km beyond the lead included in the rates including loading, unloading and stacking at the destination. all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified & directed by Engg in Charge

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring with 1.5 Sq mm copper conductor single core PVC insulated FR 1100 Volts multistranded drawn through and including rigid PVC conduit surface and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with suitable hylum sheet 3 mm thick for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light/fan point controlled by one, one way switch 5 amps, SP

One ceiling / exhaust fan point controlled by one, one way switch and regulator

One bell point controlled by one, one way switch 5A, SP

One 2/3 pin 5 Amps socket outlet point controlled by one switch on the same board

One 3 Pin 5 Amps switch socket Independt board

All as per item No 145 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4.00 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Description all as per item No 145 here-in-before but using 2.5 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for industrial plug socket. point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.

Supply and fix switch socket combination flush type multipurpose 2/3 pin 5 Amps, 230 Volts complete all as specified.

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts all as specified

Supply and fix switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

S & F Vertical type TPN DB 4 way double door with incoming as MCCB TP 415 volts AC 3 phase 50 Hz with fixed magnetic setting for current rating of 63 Amps 16 KA.

S & F Sheet metal enclusure MCB DB SPN 8 way double door with 200A rated bus bar 240V double door with flush type locking system complete all as specified

S & F MCB SP 6 to 32 Amps 240 volts for fixing in MCB DB's all as specified.

S & F MCB SP 40 to 63 Amps 240 volts for fixing in MCB DB's all as specified

S & F MCB SPN 40 to 63 Amps 240 volts for fixing in MCB DB's all as specified

Supply & Fix MCB SPN 240 volts C' series suitable for fixing on MCB DB's of capacity 5-32 Amps 10 KA breaking capacity complete all as specified.

S and F sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 Volts double door with flush type locking system complete all as specified.

S and F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with flush type locking system complete all as specified.

Supply & Fix MCCB TPN 415 volts C' series suitable for fixing on MCCB DB's of capacity 100 Amps 25 KA breaking capacity complete all as specified.

S & F wall mounted box type LED batten suitable for 20w with LED lamp along with integrated driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor of multistrand three core 1.5 sqmm of suitable length from fitting to the ceiling rose

S & F wall mounted box type LED batten suitable for 09w/10w with LED lamp along with integrated driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor of multistrand three core 1.5 sqmm of suitable length from fitting to the ceiling rose

S & F 36 watt recess softline luminaire (2x2) suitable for armstrong/grid ceiling with high brightness white LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal and all as directed by Engg in charge

Taking down existing tube light fitting of any description/type/ size from TW batten/conduit including removal of batten / conduit / gutties light fittings etc and and fixing the same after necessary cleaning/serviceable and fixing the same on the existing surface after making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified & directed by Engg in Charge. Note :- 1. PVC 2 Core copper cable multstandrad of size 1.50 Sqmm from ceiling rose to tube light fitting and cost of gutties, screws and tools/eqpts neccessary for fixing,electrician are deemed to be included in the rate quoted by the contractor

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings

M & L for Submain wiring with four core 10 Sq mm PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of suitable dia medium grade including running up of two runs of 10 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Four runs of cable, two run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two single core 6 Sq mm PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate)

S & F in replacement of UNSV security ight luminaire in single pc.drawn aluminium IP66 with high power LED as light source with Acrylic cover suitable for 1 x 45 W LED lamp including provision of three runs of PVC insulated unsheated 1100 volts grade single core cable with copper conductors, multistrandard cable on bldg , all as specified as directed & Including GI pipe bracket for security light fitting of suitable dia med grade 1500 mm long bend to shape welding etc and fixing on bldg wall with good quality flat iron MS clamp and necessary nuts, bolts, and washers complete, all as specified and as directed by Engr-in-charge.

S & F Bell ding dong type AC 230 volts.

S & F Electronic bell (ding dong) AC 230 volts.

Disconnecting and removing ceiling fan/exhaust fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. Note :- 1. PVC 2 Core copper cable multstandrad of size 1.50 Sqmm from ceiling rose to ceiling fan deemed to be included in the rate quoted by the contractor

S&F Single pole and nuetral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer-in-Charge

S & Fix ceiling fan regulator step type AC 240 volt suitable for 1200/1400 mm sweep.

S&F bell push button Single pole 230v

S&F bell push one way flush type 5 Amps capacity 230v

S&F Metal Clad Socket 3 Pin 30 Amps industrial type with plug top and MCB SP 20 Amps all enclosed in sheet metal enclosure.

S & F switch socket combination 2/1 multipurpose 3/5 pin 5/15 Amps flush type, 230 Volts all as specified.

Supply & fix electronic dimmer ,450 w,250 v flush type on the existing phenolic laminated sheet all as directed.

Supply & fix Ceiling fan of 1200 mm sweep complete with fan down rod 2.5/4.0 feet suitable on site including provision of 3 core flexinble copper conductor cable of size 23/0.19 from ceiling rose to ceiling fan and connecting up complete all as specified and directed ( Note : Round flexible copper conductor Flame retardant PVC insulated and sheathed 3 core multi stranded of size 0.50 Sq mm.from ceiling rose to connector deemed to be included in the rate quoted by the contractor).

Supply & fix Exhaust fan with louver of 300 mm sweep complete and connecting up with new round flexible copper conductor Flame retardant PVC insulated and sheathed 3 core multi stranded of size 0.50 Sq mm.from ceiling rose to connector . ( Note : Round flexible copper conductor Flame retardant PVC insulated and sheathed 3 core multi stranded of size 0.50 Sq mm.from ceiling rose to connector deemed to be included in the rate quoted by the contractor) .

Cutting of wall in round shape and making hole suitable for mounting of 300 mm dia exhaust fan and making good disturbed surface matching with existing colour and all including grouting of nuts and bolts all as specified and directed.

S & F wall mounted LED batten of 18 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Luker Cat Part No LT 818 or equivalent make in Philips/Bajaj/Havells

S & F lamp holder insulated body surface bakelite including LED Lamp of 7 watt with back plate suitable for angle / batten fittings fixed with PVC round blocks all as specified of Luker Cat Part No LBPC07CL or equivalent make in Philips/Bajaj/Havells

S & F 10watt bulk head luminaire suitable for outdoor with high brightness giving glare free light and all as directed by Engg in charge of Luker Cat Part No LODCLSE-27 or equivalent make in Philips/Bajaj/Havells

S & F in replacement of UNSV security ight luminaire in single pc.drawn aluminium IP66 with high power LED as light source with Acrylic cover suitable for 1 x 36 W LED lamp including provision of three runs of PVC insulated unsheated 1100 volts grade single core cable with copper conductors, multistrandard cable on bldg , all as specified as directed & IncludingGI pipe bracket for security light fitting made from 25 mm dia light grade 1500 mm long bend to shape welding etc and fixing on bldg wall with 50x6 mm flat iron MS clamp and necessary nuts, bolts, and washers complete, all as specified and as directed by Engr-in-charge. : Make : Luker Cat Part No.LST 36 or equivalent in Havells/philips/CG

BEEGEE DESIGN SYSTEMS

SAI RUPA CONSTRUCTIONS