Tender ID

Andaman Nicobar

Active

Works

Civil Works - Buildings

Renovation of School building of

Chief Engineer Andaman Public Works Department (APWD)

At GSSS Sawai Car Nicobar | Nicobars, Andaman And Nicobar Islands

Amount: ₹34.7 LCloses: 9 Nov 20262d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published29 Oct 2026
Closes9 Nov 2026
Bid Opening9 Nov 2026

Tender Value

₹34.7 L

EMD Value

₹69,483

Closing Date

9 Nov 2026, 3:00 pm2d left

Tender Inviting Organisation

Name

EE,CD,APWD,CAR NICOBAR

Address

Office of the Executive Engineer Construction Division APWD Car Nicobar

Work Description

Renovation of School building of GSSS Sawai School including water staging under SD-IV,CD,APWD, Car Nicobar.

Tender Information

Tender ID

2026_APWD_25529_1

Reference Number

e-tender-DB/CD/CN/2026-27/2608

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

180 days

Location

At GSSS Sawai Car Nicobar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredScan EMD,Work experience certificate,Affidavit 1.2.1,on Indian Non Judicial Bond Stamp paper,GST. (.pdf)

RequiredScan 10 Yrs Financial Statement,Form C 3,Undertaking 1.2.2 (.pdf)

RequiredThe Pan Card should be in the name of the firm participating. (.pdf)

Finance

RequiredPricebid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹69,483

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

29 Oct 2026

Published

29 Oct 2026

Bid Opening

9 Nov 2026

Download Starts

29 Oct 2026

Download Ends

9 Nov 2026

Submission Starts

30 Oct 2026

Clarification Period

30 Oct 2026 - 31 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (38 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
1.2	100X58X1.90 mm	117	each	211.5	₹24,745.5
2Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
2.1	300x16 mm	36	each	556.65	₹20,039.4
3Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
3.1	300x10 mm	72	each	237.5	₹17,100
3.2	150x10 mm	18	each	115.35	₹2,076.3
4Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
4.1	125 mm	18	each	94.95	₹1,709.1
5	Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.	45	metre	696.65	₹31,349.25

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.90 MB

Work Item Documents

TenderDocumentSAWAI.pdf

Tender Documents • 1.39 MB

BOQ_27031.xls

BOQ • 0.31 MB

Instructions-to-bidders.pdf

Additional Documents • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
1.2	100X58X1.90 mm	117	each	211.5	₹24,745.5
2Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
2.1	300x16 mm	36	each	556.65	₹20,039.4
3Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
3.1	300x10 mm	72	each	237.5	₹17,100
3.2	150x10 mm	18	each	115.35	₹2,076.3
4Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
4.1	125 mm	18	each	94.95	₹1,709.1
5	Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.	45	metre	696.65	₹31,349.25

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

1.2

100X58X1.90 mm

117

each

211.5

₹24,745.5

2Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

2.1

300x16 mm

each

556.65

₹20,039.4

3Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

3.1

300x10 mm

each

237.5

₹17,100

3.2

150x10 mm

each

115.35

₹2,076.3

4Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

4.1

125 mm

each

94.95

₹1,709.1

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.

metre

696.65

₹31,349.25