SPL REPAIR REPLACEMENT OF HT OH LINE TO HT AERIAL BUNCH CABLE AND ITS ALLIED WORKS AT MUZAFFARPUR and SPL REPAIR REPLACEMENT OF CONDEMNED ELECTRICAL EQUIPMENTS AT DANAPUR UNDER GE DANAPUR CANTT

Dismantling of OH ACSR conductor of any size and removing unserviceable conductor from site complete all as specified & directed.

Dismantling of HT insulators of any type or size complete all as specified and directed.

Dismantling of cross arms of MS channels or angle, section etc complete and setting aside for reuse or as directed.

Dismantling of old unserviceable earth wire/cradles of any size or distributor span, complete all as specified & directed.

Supply, fixing, testing and commissioning in replacement Aerial Bunch Cable 3 core x 95 sqmm + 1 x70 sqmm massanger, aluminium conductor, XLPE insulated, UV resistant black outer sheathed, coforming to IS:7098 (Part-2) including fixing on 11 mtr HT poles with suitable GI suspension clamps, deade end clamps, piercing connectors, line hardware, binding materials with all accessories complete all as specified and directed.

Anchoring clamps with hooks suitable for all sizes of AB cables.

Tension clamps suitable for all sizes of AB cables.

Supply and fixing Dead end clamps for HT cables.

Supply and erecting steel tubular swaged poles complete with cast iron base plate, finial taper plug bolts, nuts and screw as specified, type 410 SP-31, 9.0 Metre long including painting all external exposed steel surfaces with two coats of aluminium paint over a coat of red oxide zinc chrome primer and all internal surfaces & external surfaces in contract with concrete with two coats of black bituminous paint and painting of bottom portion of the pole upto 0.75m from top of the copping with two coat of synthetic enamel paint over a coat of red oxide primer and writing pole No with synthetic enamel white paint on black colour circle of suitable size complete all as specified and directed.

Supply ,fabrication, installation and testing of LT Panel in door type factory made CPRI Approved, water and vermin proof protection of suitable size made out of 2.00 mm thick CRCA sheet dully supported with mild steel angle iron of size 40 x 40 x 5 mm vertical frame and legs with mild steel flat iron 40 x 40 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.