WORK OF DEVIYE APDA UNDER ELECTRICITY DISTRIBUTION DIVISION CHANDAUSI, SAMBHAL AND BABRALA

Amount

For EDD Chandausi, Sambhal and Babrala (DEVIYA APDA 2025-26)

Cartage and Errction of following material from store center to site including loading & unloading at both ends maximum distance up to 40 Km. :-

PCC POLE 8.5 MTR LONG

11 KV XARM V TYPE

F-BRACKET

M.S CHANNEL 125X665X1300MM (T-OFF)

TOP CHANNEL

11 KV POLYMERIC PIN INSULATOR

11 KV PIN WITH NUT

11 KV POLYMERIC DISC INSULATOR

11 KV DISC INSULATOR WITH FITTING

11 KV DISC FITTING

ACSR WEASEL CONDUCTOR

11 KV STAY SET COMPLETE

10 KVA TF 11/0.4 KV

25 KVA TF 11/0.4 KV

63 KVA TF 11/0.4 KV

100 KVA TF 11/0.4 KV

Earthing Road

MS CLAMP FOR ABOVE WITH BOLT AND NUT

STONE PAD 300X300X75 MM

STAY WIRE 7X10 SWG

CONCRETING OF SUPPORT

CONCRETING OF STAY

F BRACKET FOR 11 KV LINE

Making of double pole on PCC pole 8.5 meter for 10/25/63/100 kva transformer

Fixing of 11 KV X-Arm V Type .

Grouting of Pcc pole 8.5 Mtr . Long as per respo norms

Laying lifting stringing of proper sagging of ACSR WEASEL conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.

Earthing of each 11 KV line Pole after drive of electrodes of size 20mm x 250 mm and connection the earthing point with GI wire

Providing and fixing of MS clamp for PCC pole

Fixing of Stay set for double pole on 8.5 meter pcc pole

Dismentle of existing 11 kv line (ACSR weasel conductor 1650 meter) with making bundle from the wire

Dismantling of Existing 10/25/63/100 kva double pole

Dismantling of Existing Old PCC/RS Joist

Carriage of dismantled acsr weasel conductor from site to Central Store with Loading and Unloading

Jumpring of 11 kv works properly as per Respo Norms

Providing and Fixing of Stone Pad

Providing and fixing of Earth wire clamp.

Providing and fixing of Cross arm Holding clamp.

Providing and fixing of Bolt and Nuts.

Tree cutting Compensation

Providing and fixing of LT CLAMP

Providing and fixing of LT SHACKLE INSULATOR

Providing and fixing of HOLDING CLAMP

Providing and fixing of M.S ANGLE

Repairing of Damage X Arm by way of welding, cutting and Grinding as per site requirment. (All Required Material for Maintenance are provided by Contractor on his own Cost)

Repairing of S.T. Pole by way of Applying Angle/Steal Sheet, welding and cutting at site as per site requirment. (All Required Material for Maintenance are provided by Contractor on his own Cost)

OM ENTERPRISES (BID ID -5231373)