Repair/Maint of perimeter light and street light and other allied works services at Air Force Station Jaisalmer

Amount

Taking down existing unserviceable Street Light/Perimeter Light /High mast Light and Building Security Light any type any make from pole, hangers, buildings/High mast Poles at any height etc any type complete after removing from existing bracket etc and re-fixing the same after necessary repair/ replacement of unserviceable Light with new fittings/component etc complete all as specified and directed by Engineer-in-Charge. Note:- (i) Replacement and fixing of unserviceable component etc required will be measured & paid separately under respective items of this schedule. (ii) Fitting shall be connected with existing electric wire / cable, in case of existing wire / cable found unserviceable same shall be measured and paid in relevent items. (iii) Any type of Ladder for dismantling of light from pole/hanger/high mast pole shall be arranged by the contractor.

Supply and fixing in replacement of copper ballast 150 watt for HPSV/HPMV street light fittings complete all as specified and directed. Make : Bajaj/Philips/Havells/Crompton Greaves

Supply and fixing in replacement of copper ballast 70 watt for HPSV/HPMV street light fittings complete all as specified and directed. Make : Bajaj/Philips/Havells/Crompton Greaves

Supply and fixing in replacement of igniter 70/150/250 watt for HPSV/HPMV street light fittings complete all as specified and directed. Make : Bajaj/Philips/Havells/Crompton Greaves

Supply and fixing in replacement of metal halide lamp 150 watt 230 volts for HPSV/HPMV street light fittings complete all as specified and directed. Make : Bajaj/ Philips/ Havells/ Crompton Greaves

Supply and fixing in replacement of High Pressure Sodium Vapour lamp (HPSV) 70 watt 230 volts, screw type for street light fittings complete all as specified and directed. Make : Bajaj/ Philips/Havells/Crompton Greaves

S&F in replacement of round, 1.5 Sqmm, 3 core cable PVC insulated and fire retardant PVC sheathed, copper conductor for electric connection from feeder/looping box /street light/junction box over head line to street light fittings including taking out old unserviceable cable from pole complete all as specified and directed.

S&F in repair street light box of PVC consisting of MCB 10 Amps, 10 KA rupturing capacity (Single Pole) with bakelite TPN supporter and din rail for fixing MCB for incoming and outgoing cable with necessary connection duly fixed on the pole with suitable size of MS clamp as approved and directed. Make : Sintex/National.

M&L for Pre Stressed concrete Pole 9.00 mtr long, 102mm x 172mm at top and 102mm x 279mm at bottom, class 10 complying with requirements of IS-1678-1978 including painting of poles with two coats of synthetic enamel paint over a coat of primer with black and white strips 30cm wide each upto 1.5mtr height from top of PCC foundation block and numbering of poles, including disconnecting & taking down old unserviceable corroded steel tubular pole/broken RCC Pole complete all as specified and directed.

S&F in replacement of energy efficient LED street light fittings of 60 Watt, pressure die cast alluminium housing & toughened glass with IP-66 degree of protection, individuals LED's should have lenses for better throw across & along road range 140-280 volts fittings should be provided 5 KV surge protection external and apart from this surge, arrestor driver should have additional 4 KV surge protector in built in driver for maximised protections, should have lumens output of 100 lumens watt minium protections facility in drivers, driver should be potted type for viberation proof performance & includings making electrical connections all as directed. Make: Cromption Greaves Cat Part No. LSTP-60-CDL or equivalent in Philips / Orient /Havells / Wipro. Note :- Driver should be BIS registered with "R" marking.

S&F in replacement, bracket made out of 40mm bore galvanized steel tubing medium grade 1.50m long including bending if required as direct, 02 Nos clamps made out of MS flat iron 40x6mm of including suitable size fixed with bolts, nuts and washer including drilling holes and grouting with the same for fixing bolts complete all as specified.

S&F in replacement pin type insulator, vertical type, porcelain vitreous, white, brown or green for working pressure 11000 volts, 150mm height and 150mm dia including galvanized mild steel spindle, two Nos GI washers, one No GI nut complete all as specified.

S&F MCCB, 4 Pole, 200 Amps rating, rupturing capacity 36 kA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB from panel board, complete all as specified and directed. Make : L&T/Legrand/ Siemens/ HPL/C&S.

S&F MCCB, 4 Pole, 160 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB from panel board, complete all as specified and directed. Make : L&T/Legrand/Siemens/ HPL/C&S.

S&F MCCB, 4 Pole, 125 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB from panel board, complete all as specified and directed. Make : L&T/Legrand/Siemens/ HPL/C&S.

S&F MCCB, 4 Pole, 100 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB from panel board, complete all as specified and directed. Make : L&T/Legrand/Siemens/ HPL/C&S.

S&F MCCB, 4 Pole, 63 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, Magnetic fixed type and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB from panel board, complete all as specified and directed. Make : L&T/Legrand/Siemens/ HPL/C&S.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT electric power cable (ISI marked) with aluminium stranded conductor 1100 volt grade cross sectional area 35 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including dismantling & taking out old unserviceable cable complete all as specified and directed. Note : Sand cushioning, cable protection cover and excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT electric power cable (ISI marked) with aluminium stranded conductor 1100 volt grade cross sectional area 25 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including dismantling & taking out old unserviceable cable complete all as specified and directed. Note : Sand cushioning, cable protection cover and excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT electric power cable (ISI marked) with aluminium stranded conductor 1100 volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including dismantling & taking out old unserviceable cable complete all as specified and directed. Note : Sand cushioning, cable protection cover and excavation & earth work shall be measured & paid for separately.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT electric power cable (ISI marked) with aluminium stranded conductor 1100 volt grade cross sectional area 10 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including dismantling & taking out old unserviceable cable complete all as specified and directed. Note : Sand cushioning, cable protection cover and excavation & earth work shall be measured & paid for separately.

S&F in replacement and connecting LED flood light on building /high mast poles etc aesthetically design fittings pressue die cast housing with IP 65 protection system efficacy ≥ 110LPW option for 3000 K, 10KV SPD included, high output emitter LED for better thermal management of capacity 120 Watt (3000K CCT). Make : Cat Part No. LFLN-120-CDL/60-M of crompton greaves or equivallent in Orient/Wipro.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out hard/dense soil complete all as specified and directed.

Excavating in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre in depth but not exceeding 3.00 metre depth for foundation etc or for laying of cables, erection of poles, struts/stays pipes etc and getting out in hard/dense soil complete all as specified.

Returning, filling in including in spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-charge.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified.

M&L for dry sand to underground cable provided with a layer of 8cm deep before laying cable and 15cm after laying of cable and punned to 18cm after laying of cable and cover for protection of underground cable complete all as specified and directed. Notes: (i) Approved dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment only punned thickness shall be measured.

M&L for 40 to 50 mm thick rough dressed Jodhpur type stone slab 25 to 35cm width and 80cm long laid dry abutting each other for protection to under ground cable including dismantling & taking out old unserviceable cable complete all as specified and directed.

S&F in replacement and connecting LED flood light fittings on high mast pole pressue die cast housing with IP 66 protection high resistant tempered glass for protection with 5 KV surge protection applicable for large area lighting with efficient high output emitter LED for better distributioin of capacity 250 Watt (3000K CCT) complete all as specified. Make : Cat Part No. LSFO-250-CDL/60-M of crompton Greaves or equivallent in Orient/Wipro.

M&L for preparation of surfaces of RCC poles and paint of poles with one coats of synthetic enamel paint over a coat of primer with Navy blue and white strips 30cm wide each upto 1.50mtr height from top of PCC foundation block and numbering of poles complete all as specified and directed

M&L for preparation of surfaces for RCC poles 11.00 mtr long extension portion and paint of poles with one coat of aluminium paint over full length and making of pole number and five strips each 30cm wide in black & white upto 1.5mtr height from top of PCC foundation block complete all as specified and directed

M&L for plain cement concrete (1:4:8) Type D-2 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete including necessary form work complete all as specified and directed.

M&L for plain cement concrete (1:3:6) Type C-2 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete including necessary form work complete all as specified and directed.

S&F in replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 x 6mm strip galvanised iron complete all as specified. Note : Nut, bolt and other items included in quoted rate by the tenderer.)

M&L for earthing to electric equipments/panels with and including galvanized MS earth plate electrode of size 600x600x6mm thick burried vertically in ground to a depth not less than 2.25 metre below ground level, with top edge of earth plate not less than 1.5m below ground level as shown in electrical plate No 3 of SSR Part I, the earth plate surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides, excavation & earth work in any type of soil and removal of surplus soil upto 50m including galvanized mild steel strip 25mm x 6mm as earth lead, welding at top of electrode and other end of strip connected to equipment body/ panel/ test point with two Nos nuts bolts or welding with steel structure, GI earth strip encased in and including 50mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 3.00 metre above ground level fixed along equipment body/panel with and including 25x3mm FI clamps, bolts, nuts and washers, PCC chamber (1:3:6) type C1, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering, 75 mm thick RCC cover 1:2:4 type B1 shall be provided on CI frame etc including dismantling & taking out old existing unserviceable earthing complete all as specified & as directed. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.

M&L for repair of complete LT panel by welding of hinges, door, including door, hings with locking arrangement and layout the LT cable in proper manner by excavation & refilling connecting and taking down existing unserviceable cable including painting of complete panel all as specified and directed.

Treeming of trees branches both side 3.00 metre wide of LT over head line and HT over head line during the treeming first take proper shutdown by informing the concerned JE (E/M) and Engr-in-Charge. Note : 3/4 wire LT over head and HT over head line shall be measured & paid as one running metre.

S&F in replacement of electronic driver suitable for LED street light fittings for 72W/60W/45W suitable complete all as specified and directed by Engineer-in-Charge. Make : Cat Part No X075C070V107FNY1BO of Crompton Greaves or equivalent Havells/Bajaj

S&F 6 Sqmm single core PVC insulated, aluminium conductor multi stranded/solid on poles or passing through steel conduit pipe 1100 volts grade with suitable cable lugs, clamps, nut bolts etc including dismantling/taking out old defective cable form street light poles (Junction box to fitting) complete all as specified and directed.

S&F in replacement of Post-top, Energy saving, environmental friendly, IP65 rated inverted Pyramid Tripod type LED Bollord with soft 360 deg light distribution complete all as specified. Make : Crompton Greaves Cat Part No. LBLSN-10-CDL or equivalent Havelles/Philips.

Supply, fixing, commissioning and testing of automatic operation of street light switch having lighting control through astronomical calculation of sun rise/sun set time by setting data, time and degree of longitude, latitude with out of separate light sensor, enclose in sheet metal enclosed metal out of 14 SWG CRCA sheet duly painted and prewired of suitable size duly fixing of angle iron of suitable size including PCC work if required complete all as specified. Make : Indoasian Cat Part No. TL065AS0 or equivalent Legrand/Havells. Note : Old panel of any capacity shall be given to the contractor as schedule of credit either it has been bus bar/MCCB or not.

S&F in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cables 4 Sqmm complete all as specified.

S&F in replacement of MCB isolator, 63 Amp, Three Pole, 415 volts, 50 Hz, 1100 volts with necessary modifications in panel Board for connection of MCBs complete all as specified and directed.

S&F in replacement of MCB isolator, 63 Amp, Three Pole with neutral, 415 volts, 50 Hz, 1100 volts with necessary modifications in panel Board for connection of MCBs complete all as specified and directed

S&F in replacement of Analog Time switches, 3P Module, 24 hours program, Programmable every 15 min., backup of 100 hours., current capacity 16A, with 1 changeover (1 CO) complete all as specified and directed. Make : Indoasian Cat Part No. TA926453 or equivalent L&T/ Havells/C&S

S&F in replacement of aluminium conductor, steel reinforced (ACSR) of any size, any type, as per existing one and stringing properly on the insulators and binding with aluminium wire 14 SWG, connectors, Jumpers etc complete all as specified and directed. (Note : Measurements and payments shall be made by measuring horizontal distance between centres of two adjacent pole and adding 3% for sag, jointing, jumpers etc).

S&F Galvanised Iron continuous earth wire or guard/cradle made to shape of 4mm dia including Galvanized mild steel binding wire 14SWG complete including dismantling existing unserviceable continuous GI earth wire/guard/cradles of any size all as specified & as directed. Note :- Galvanized wire shall be measured & paid for under this item and clamps, eye hooks where provided shall be measured and paid for separately.

SANJOLI CONSTRUCTION COMPANY

star electricals

M/s Shree Construction Company

M/s Ramesh & Company

Leelashah Enterprises

SHRI TEMRERAY AND COMPANY

Vinayak Distributors

M/S JAGDAMBA ENTERPRISES

M/S SOLANKI GENERAL SUPPLIERS

M/S AUTOMATION AND SWITCHGEAR CONTROL

JAI ENGINEERING COMPANY