ADDN ALTN TO BLDG NO T195 AND SPECIAL REPAIR TO SIGN POSTING BOARDS IN THE AOR OF AGE BR I UNDER GE NARANGI

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

S&F powder coated anodised aluminium window and ventilator shutters with frame, side hung / top hung type with / without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) , tower bolts 100 long (1 No) and including 4mm thick float glass tinted quality and stainless steel wiremesh complete all as specified and as directed.

S&F Aluminium chequered grill with aluminium anodized of diamond shape with 6 mm dia section and mesh of size 75 x 75 mm in aluminium 'Y' channel and aluminium flat 25 mm wide fixed with aluminium screws complete all as specified and as directed.

S&F powder coated anodized aluminium push pull type fully glazed door shutter (single leaf / double leaf) having top rail of section (85 x44.45 x2)mm, bottom rail of section (85 x 44.45 x2)mm, door verticals of section (44.45 x44.45 x2)mm and lock rail of section (85 mmx44.45 x2)mm with aluminium anodized chowkats of section (63.50 x33.10 x2.50)mm including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc. including 5 mm thick float glass tinted quality on top and bottom panel (both panel) complete all as specified and as directed. (Note : Door closer shall be measured and paid separately)

S&F in repairs, aluminium (extruded section) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repair suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5 mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, on skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for glazed ceramic tiles of size (300 x 200 x 7)mm/ (350 x 250 x 7)mm/ (450 x 350 x 7)mm thick coloured on vertical surfaces set, jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as speciified and drected.

M&L for 100 mm thick precast cement concrete solid building blocks or slabs of PCC type B1 1:2:4 (using 20mm graded stone aggregate), set in cement mortar 1:4 with plain or interlocking joints complete all as specified and as directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (Total coated thickness) any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws including taking down old existing sheet complete all as specified and directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick (Total coated thickness) any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified including taking down old existing sheet complete all as specified and directed. Note: To be executed for provision of ridges and hips.

Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound (ISI Marked) complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion weather coat paint over one coat of primer including a coat of wall care putty not less than 1mm thick including sanding the surface till smooth finished is obtained complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of wall care putty not less than 1mm thick, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all specified and as directed

M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

Demolition of plain cement concrete (un-reinforced) of any descrption and in any position not otherwise specifically provided, including removal of spoils/ demolished materials not exceeding 100m and depositing complete all as specified and as directed. (Note: Taking down of Old existing Sign Boards including posts of any description and size deemed to be included in the quoted rate.)

M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed

S&F Stainless steel circular tube of 304 exterior grade quality in frame work of sign boards welded vertical / horizontally as directed for, 60mm outer dia with weight not less than 2.39 Kg/Rm of length 6.2 meter (top ends to be closed with flat stainless steel plate of equal dia with thickness not less than 3mm), Stainless steel tube 40mm outer dia with weight not less than 1.36 Kg/Rm of length 6.3 meter, (15x25) mm size stainless steel tube (weight not less than 1.30 Kg/Rm) around the peripheries of the frame and 02 Nos horizontal across the frame welded together of length 7.80 meter and 15mm square pipe with weight not less than 0.82 Kg/Rm (welded at the bottom on both sides thickness not less than 3mm) of length 1.0 meter of Stainless Steel tube and stiffner shall be welded to the frame, complete including necessary earthwork required all as specified and as directed. (Note: The frame shape and size are to be made as per sample kept in GE Narangi Office) (Make: JINDAL / TATA )

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

M&L for aluminium composite panel (ACP) board of thickness not less than 3mm fixed along with self adhessive retro reflective sheet of exterior grade quality as per ASTMD 4956-01 in two layers includes engraving/ triming/ extract /itching of letters/ logo deisgns with retro reflective sheet of approved make of any description as required complete all as specified and as directed. (Note: The pattern, colour and design of board are to be made as per sample kept in GE Narangi Office) (Make: 3M / Avery Denission)

M/s Dhani Enterprise

M/S KAMAKHYA CONSTRUCTION AND BUILDERS