Maintenance and Special Repaire to Thennampalayam MCC Center,Providing of Rolling Shutter for Segregation Center and Electrical Arrangements for Thennampalayam Community Hall in Ward No. 52.

Amount

Earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth within the compound in place shown by the departmental officers and clearing and levelling the site etc,. complete.

Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.

Supplying and erecting centering including necessary supports for the plane surfaces such as Drainage & Culvert Retaining walls etc., using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding supported by casurina props of 10cm to 13cm dia spaced at suitable intervals etc., complete complying with standard specification.

Plain Cement concrete in 1:3:6 [one cement, three M-sand and six course aggregate] using 20mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.

Plastering with cement mortar 1:4 mix (one cement four P-sand), 20mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Plastering with cement mortar 1:5 mix (one cement five P-sand), 12mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Finishing the top of flooring with a layer of cement concrete 1:3 [one cement and three stone jelly] ELLIS PATTERN 20mm thick using 10mm thick and below gauge HBG stone (No sand to be added) and the surfaces rubbed smooth with current etc., complete complying with standard specification.

Supplying and Erecting Pull and Push Type Rolling Shutter (Gear Operarted Type) with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc

Painting two coats for New iron work surface using best quality synthetic enamel paint etc., complete complying with standard specification.

Wring With 2 x1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu Conductor of 1100V Grade in Suitable PVC Rigid Pipe concealed in wall and ceiling with pvc accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box And 5A F.T switch with continous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable color of PVC concealed light point / Fan Point (For Electronic regulator ).

Supply and fixing of 20W 4 Feet LED Fitting as per standard specificatin

Supply and fixing of LED Outdoor 30W LED Street Light as per standard specificatin

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and fixing FRP door shutter with frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of hold fasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., complete complying with standard specification.

Add GST @ 18%

K.Kuppuchamy

ULTRA TRADERS