REPAIR TO ROADS, FOOTPATHS, KERB STONE AND ALLIED ROAD FURNITURE AT AF STATION PALAM UNDER GE (AF) GURGAON NO 1

Preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.

Material and Labour using paving bitumen Applying evenly a priming/tack coat with bituminous primer at 05 kg per 10 sq metre on road surface complete all as specified and directed.

Repair to pot holes of any depth, not exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 9.8Kg per 10 Sqm, blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and chipping to uniform surface) depth of pot holes not exc 30mm complete all as specified and directed. Note : (a) Material for premixed bituminous macadam shall be mixed in hot mixing plant.

Material and Labour Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen of any penetration as biunder 4% by weight of total mix, including cutting edges etc complete all as specified & directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer VG-10 @ 5kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with 5.5% (Approx) binder (bitumen VG-30) content by weight of total mix , rolled and compacted with 8 to 10 Tonne power road roller including refixing/raising brick edging to required gradient and camber complete all as specified and directed. Note : (a) Material for SDAC shall be mixed in hot mixing plant. (b) Mix design of bitumenous SDAC will be got done from approved Lab. (c) The quantity of bitumen actually used at site shall be as per mix design formula aprooved by GE. (d) The premix carpet shall be laid with mechenical paver. (c) Contractor Should arrange Bitumen extraction Test at Site during execution of SDAC work.

Material and Labour for painting lines, dashes, arrows, letters etc on roads pavement by using reflective thermo plastic paint confirming to BS:3262 (5Kg/Sqm) with glass beads potters (250 gms) in 10 cm/15 cm wide strips on bituminous road surface and road marking (by Hot Mechanical process with Road Marking Machine) including complete removal of dust particle by wire brushes or sweeping with brooms complete all as specified and as directed.

Demolition of Stone slab and tiles laid dry of any description or thickness in floors,aprons complete all as specified and directed.

Material and Labour for 60mm thick Machine pressed precast concrete Glazed inter locking paver block M-35 Gde any shape and size with white cement and pigment conforming to IS 15658-2006 over 25 mm sand cushioning, including patch work etc as specified and as directed.

Fixing only old interlocking paver block obtained from dismantled, over sand Cushioning as specified and as directed.

Material and Labour in repair for Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed colour, Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:4) as in Path, complete all as specified and as directed.