Term contract for Street lighting (Erection Removal of street light poles and laying of underground cable System in Pune Cantt area

TERM CONTRACT FOR STREET LIGHT

Dismantling steel poles/struts, any size

Cement concrete in foundations, filling and mass concrete Type C2 1:3:6 (40 mm graded aggregate)

Excavating in trenches , not exceeding 1.5 m wide not exceeding 1.5 m in depth for foundation etc for erection of street light pole carried out in soft loose soil

Excavating in trenches , not exceeding 1.5 m wide not exceeding 1.5 m in depth for foundation etc for erection of street light pole carried out in Hard dense soil

Excavating in trenches , not exceeding 1.5 m wide not exceeding 1.5 m in depth for foundation etc for erection of street light pole carried out in Hard rock

Earthing complete with GI earth plate electrode 60×60cm.× 6mm thick, buried directly in ground

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections with two single core cables 10 sqmm

Supply and installation of 6 mtr height GI octagonal pole having 135 mm bottom and 70 mm top with foundation bolts excluding CC foundation. The Octagonal pole shall be Hot deep galvanized to 50-70 microns having nominal thickness of 3 mm, pole should have inbuilt junction box with allen key locking arrangements and having 2-6 Amp MCB and terminal strip

Supply and installation of 7 mtr height GI octagonal pole having 135 mm bottom and 70 mm top with foundation bolts excluding CC foundation. The Octagonal pole shall be Hot deep galvanized to 50-70 microns having nominal thickness of 3 mm, pole should have inbuilt junction box with allen key locking arrangements and having 2-6 Amp MCB and terminal strip.

Supply and installation of 8 mtr height GI octagonal pole having 135 mm bottom and 70 mm top with foundation bolts excluding CC foundation. The Octagonal pole shall be Hot deep galvanized to 50-70 microns having nominal thickness of 3 mm, pole should have inbuilt junction box with allen key locking arrangements and having 2-6 Amp MCB and terminal strip.

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification

Excavating in trenches , not exceeding 1.5 m wide not exceeding 1.5 m in depth for foundation etc for erection of street light pole carried out in Hard dense soil

Supply & installation of street light feeder having 14 SWG CRCA sheet metal powder coated enclosure box having provision for mounting of 3 phase electricity meter and street light controller . The street light controller should have 1 no. 100 Amp 4 pole MCCB, 3 nos of 32 amp single pole MCBs, 24 hour settable street light timer with provision of daily sunrise and sunset times, 70 amp 4 pole contactor. The internal wiring of the feeder shall be made in 6 sq.mm Cu cable. The panel should be of IP65 category and having double allen key locking system. The mounting arrangement shall be provided with MS angle bars having height of 2 ft above ground.

XLPE insulated, armoured heavy duty electric cable with heavy duty electric cable with volts grade, cross-sectional area 10 sq. mm 4 Core

Steel tubular swaged poles with cast iron base plate, finial taper complete plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) Fixing only

HDPE Pipes PN 10 Bore in 50 mm

Buyback of MS/GI street light poles