Providing special repair to EI in terminal Sabzi Mandi at Solan SH Replacement of damaged wires accessories switchgear and CFL Fittings with LED Fittings therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C

Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required. ( including switch & bakelite sheet etc.) Group C

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

3x4.0 Sq. mm.

6x4.0 Sq. mm.

2x10 Sq. mm.

4x10 Sq. mm.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.

S.P. 5/ 6 Amps one way switch, piano type.

5 pin 5/ 6 Amps socket outlet, porcelain base/ piano type.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 200mmx150mmx75mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 3 pair of S.P. 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.(Computer Point)

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-12Way

Double door-8Way

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Cat.-A

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-MCBDP-63 Amp Cat-A

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required. 100 Amp -16KA

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 16 sq. mm (four core)

Armoured cable 25 sq. mm (3.5 core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 25 Liter capacity water heater (Cat-A)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 32 mm dia. G.I. pipe, heavy class

Providing and installation of Light duty, plastic body, Ventilating Fan, Light duty, (Plastic body) 250 mm sweep in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Havells, Bajaj, Crompton Greaves, Usha, Kahitan or any other approved by Engineer-in-charge.

Providing and installation PDC aluminium housing LED highbay luminaire 75 W with extruded aluminium heat sink, with anti glare polycarbonate high transmitivity diffuser, high purity anodized aluminium spun reflector and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including adjustable bracket for luminarie,mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: C&S ,Bajaj, Panasonic,Wipro or any other approved by Engineer-in-Charge.

Providing and installation of 70 watts LED Street light with power coated pressure die cast aluminium high power led with heat resistant toughened glass with lens ,electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make:C&S, Philips, Syska, Bajaj,Greatwhite, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following surface mounting slim square type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of surface mounting slim round type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of LED batten (Commercial Type) with aluminium housing provided for efficient heat dissipation, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, Havells, Bajaj, Greatwhite, Panasonic or any other approved by Engineer-in-Charge.

LED Batten Light 20W

LED Batten Light 10W

Supplying and fixing of following LED bulk head fitting with all accessories including making connections, testing etc. as required. Make Greatwhite Philips, Panasonic or any other approved by Engineer-in-Charge.

LED bulk head 5W

LED bulk head 10W

Supplying and fixing of fancy wall bracket of chrome finish colour with opal glass diffuser made of mild steel, with single holder containing thread type LED lamp holder(s) of all sizes and shapes, complete with all accessories but excluding led lamp including making connections, testing etc. as required. Make Jaquar, Philips,Havells Lighting complete in all respect as approved by Engineer-in-Charge

Providing and installation of LED 5 W retrofit lamp B-22/E-27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Greatwhite, Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing Bell indicator 8way, suitable for D.C./A.C. single phase,230 volts complete as required:-

GURU NANAK ELECTRICALS