REPAIR TO DAMAGED MS GRILL, RCC PARAPET RAILINGS, STAIR CASE, ELECTRIC/ WATER SUPPLY DUCT, JOINERY, CRUMPLE SHEET AND CONNECTED WORK AT RASHI AREA UNDER AGE B/R II GE (NW) NAVY NAGAR, COLABA, MUMBAI

Amount

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab (greenish colour), as in floors, treads of steps, landing etc. laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including mirror polishing complete all as specified and directed by Engineer-in-Charge.

M &L for machine cut kota stone slab (greenish colour) 18 to 20 mm thick as in vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile including mirror polishing complete all as specified and directed by Engineer-in-Charge.

M&L for mirror polishing with machine to existing Kota stone, marble stone fixed in any position including filling/pointing the joints of tiles with white cement mixed with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.

Dismantling of MS grill of any description and in any position complete all as specified and directed by Engineer-in-Charge.

M&L for MS framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings etc conforming to Fe.290.Gde-E-165 complete all as specified

M&L for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M & L for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted wall surfaces, filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified..

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

M & L for rendering 20mm thick in two coats(15mm inner coat + 5mm finishing coat) on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with integral water proofing compound @ 3% by weight of cement and finished even and smooth without using extra cement including necessary scaffolding and safety arrangement for high rise bldgs upto G+14th floor Bldg complete all as specified and directed by Engr-in-Charge. Note- Water proofing compoundshall be measured and paid for separately.

Supply only integral water proofing compound .

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even & smooth without using extra cement completed all as specified.

M&L for preparation of new decorated surfaces of wall including washing and applying one coat of wall care putty all over surface and two coats of oil emulsion distemper, white or tinted on walls completed all as specified.

M&L for preparing new plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of self primer including necessary scaffolding and safety arrangement complete all as specified.

M & L for complete removal of existing treatment from wall, ceiling, soffits, roof facia etc including washing, rubbing down and applying two coats of weather proof acrylic based paint (100% acrylic) exterior grade over one coat of self primer including necessary scaffolding and safety arrangement complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.09 Sqm laid in floor over and including 20mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 300mm x 200mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:4), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8 mm thick laid in floor over and including 20mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for dark shade vitrified ceramic tiles of approved colour (square/rectangular) polished, area of each tiles exc 0.18 Sqm but not exc 0.36 Sqm and 9 to 10mm thick, in floor laid over and including 20mm thick screed bed in cement mortar ( (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified .

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings shown in SSR Part II.complete all as specified and as directed by Engr-in-Charge.

S&F 30 mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & manufacturers instructions.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified .

S&F 35 mm thick factory made Flush shutters, solid core constrution with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised 100 mm size, ISI marked.

S&F aluminium anodised barrel tower bolts of extruded section, 100 mm length, ISI marked.

S&F 100 mm long stainless steel butt hinges medium weight with stainless steel hinge pin, bright finished.

M&L for preparing new wooden surfaces of any description, n exc 10 cm width or girth when unconnected with other painting or when painted with different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land. Note: The place of disposal shall be find out by the contractor.

M&L for 75mm thick PCC 1:3:6 type C2 using (40 mm graded stone aggregate) in sub-base and finished fair and even complete all as specified.

M&L for machine pressed chequered cement con crete coloured tiles of size 2300mm x 300mm x 25 mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed or bedding layer in cm (1:6), and cut and polished as specified in SSR part II and as directed.

M&L for rolled mild steel in framed work as in door or gate of angle or other section with gusset plates, rails, braces etc complete,drilled for fixing of steel sheeting or other covering. Doors/gates to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings( exclusive of steel sheating or other covering,running rails and guides) and hanging also fastening and fixing conforming to Fe 410-W ( Gde E-250 ) quality A complete all as specified.

Dismantling stone slabs, pavers and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified.

M&L for 20mm thick Granite slab of approved colour (of any type), machine cut, laid over and including 15mm thick screed bed in CM 1:6, bedded and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engr-in-Charge.

M&L for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid to line and slope over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

RAMESH ENTERPRISES (BID ID -3247165)

SATGURU ENTERPRISE (BID ID -3248105)

SHRI SAI ENTERPRISES (BID ID -3244002)

Star Construction Co. (BID ID -3248263)

ASHOK CONSTRUCTION (BID ID -3254059)

Bob Enterprises (BID ID -3253849)