Repair to roads and repair/replacement of road furniture at New Mil Stn Kapurthala under GE Kapurthala

Amount

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags/air compressor to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm on road surface, laying, rolling, consolidating 30mm thick consolidated thickness bituminous premixed semi dense asphaltic concrete carpet with 5.5% binder content of bitumin grade VG-30 by weight of total mix laid with mechanical paver, rolled and compacted to required camber and gradient with pressure roller and 8 to 10 tonne power road roller and be achieved a uniform smooth surface with Pneumatic roller complete all as specified and directed. Note: Mix shall be prepared in hot mix plant as per job mix formula.

Repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to atleast 25mm in depth and applying tack coat with paving bitumen VG-10 at the rate of 5 kg per 10 sqm , making good by filling in screened and graded road metal, watering and well ramming(including supply of road metal)

Material & Labour for providing and marking 2mm thick broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with white thermoplastic paint hot applied with machine conforming to BS-3262 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens with reflector of model no. DA 972.0 fixed with and incl. MS stud of suitable size as per manufacturers instruction.

S&F solar cat eye (SOLAR STUDD) aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency monorystafie solar panel 2.4V/ 1600MA) consisting of super Led with 10000-18000 MCD completed as per manufacturers instruction etc all as specified and directed.

M&L for Premix Bituminous macadam laid/ rolled and compacted to required gradient and camber consolidated thickness not more than 75 mm using paving bitumin of any penetration as binder content 4% by weight of total mix complete all as specified and directed.

Supply and fixing informatory name board of size 1200 mm x 900 mm made of Aluminium sheet 2mm thick with stainless steel rectangular frame using 25 x 15 mm rectangular pipe with 35mm dia stainless pipe in outer boarder all around retro reflective high intensity 400 micron thick blue colour sheet pasted with heating process on both sides of the board including 75 mm to 100 mm high white colour letters cut to shape with special plotter and in proper manner indicating location / instruction / information / slogan as directed by Engineer-in-charge . 02 Nos 75 mm dia stainless steel pipes of 304 grade glossy finish with MS plate 6 mm thick welded at bottom of pipes shall be provided. the board shall be fixed at height of 3.00 m ( Top level of board ) above GL and shall be embedded ib ground using PCC 1:2:4 type B-1 of min. size 300mm x 300 mm x 600mm including necessary form work, excavation and earth work complete all as specified and directed.