Establishment of Scrap Material Storage Sheds with Covered Roofing in the Existing Salvage Yard located beside Old Finishing Hangar in Overhaul Division HAL BC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Demolishing cement concrete of nominal 1:3:6 or richer mix manually/by mechanical means including disposal of material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling of old plaster / screed or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead, etc., all complete as directed by Engineer-in-Charge.

Taking out Existing CC interlocking paver blocks from foot path /central verge including removal of rubbish etc disposal of unserviceable materials to the dumping ground for which payment shall be separately and stacking of serviceable materials within 50 meter lead, etc., all complete as directed by Engineer-in-Charge.

Demolishing brick work built in cement mortar, manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means(Hydraulic excavator) / manual means in foundation trenches or drains(not exceeding 1.50m width or 10sqm on plan) inlcuding dressing of sides and ramming of bottoms,for all lift,inlcuding getting out the excavated soil and disposal of surplus excavated soil as diretced within a lead of 50m in all kinds of soil, etc., all complete as directed by Engineer-in-Charge.

Filling available earth (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm, consolidated each deposited layer by ramming and watering lead up to 50m and foll all lift, etc., all complete as directed by Engineer-in-Charge.

Disposal of moorum / building rubbish / malba / similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10km for all lifts, etc., all complete as directed by Engineer-in-Charge. Note: Item to be applicable in urban areas having direction for restricted hours for movement / plying of laod carrying motor vehicke of 3.50 Cu m or more.

Providing and laying factory made Precast concrete solid blocks of 200mm thickness of grade M10 maded of C & D waste from approved manufacturer in foundation and plinth in cement mortart 1:6, etc., all complete as directed by Engineer-in-Charge.

Random Rubble masonry with hard stone in foundation and plinth inlcuding levelling up with cement concrete 1:6:12 up to plinth level .Cement mortar 1:6, etc., all complete as directed by Engineer-in-Charge.

Providing and Laying 60mm thick factory made cc interlocking paver block of M30 grade made by block making machine with strong vibratory compaction of apporved size design and shape laid in required colour and pattern and including 50mm thick compacted bed of coarse sand filling the joints with line sand, etc., all complete as directed by Engineer-in-Charge.

Laying of old cement concrete interlocking paver blocks of any design / shape in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of coarse sand, filling joints with sand, etc., all complete as directed by Engineer-in-Charge. (Old CC paver blocks shall be supplied by department free of cost)

Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall, etc., all complete as directed by Engineer-in-Charge.

Providing and laying cement concrete(1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.

Providing and Laying in position cement concrete of specified grade excluding the cost of centering and shuttering, All works up to plinth level.1:4:8 (1 cement:4 coarse sand derived from natural souces :8 graded stone aggregates 40mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge.

Centering and Shuttering including strutting, propping etc and removal of form work for walls (any thickness) inlcuding attached pilasters, bitresses, plinth and string courses, etc., all complete as directed by Engineer-in-Charge.

Steel reinforcement (Thermo-Mechanically Treated bars of grade Fe-500D or more.) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, etc., all complete as directed by Engineer-in-Charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.

Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over coat of primer, etc., all complete as directed by Engineer-in-Charge. (Priming and Painting to be paid for separtely)

Providing and applying white cement based wall care putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge.

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre, etc., all complete as directed by Engineer-in-Charge.

Painting 2 or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade, etc., all complete as directed by Engineer-in-Charge.

Finishing wall with acrylic smooth exterior paint of required shade .Old work on existing cement paint surface, etc., all complete as directed by Engineer-in-Charge.

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50gm/litrs and UV resistance .Alkali and Fungal resistance,dirt resiatance exterior paint of required shade with silicon additives, etc., all complete as directed by Engineer-in-Charge.

Providing and Fixing precoated galvanized iron profile sheets (size, shape and pitch of c0orrugation as approved by Engineering in Charge) of total thickness 0.50mm (base metal of minium 0.45mm thickness with total coated of 0.050mm) with zinc coating 120 grams per sqm in 240mpa steel grade,5-7 microns epoxy primer on on both side of sheet and polyster top cot 15-18 microns.Sheet should have protective guard film of 25 micron min to avoid srathes during transportation and should be supplied in single length upto 12m or as desired by EIC.The sheet shall be fixed using self drilling/self tapping screws of size [5.50 x 5]5mm with EPDM seal,complte up to any pitch in horizontal / vertical or cureved surfaces exlcuding the cost of purlin,rafter and trusses and including cutting to size and shape wherever required, etc., all complete as directed by Engineer-in-Charge.

Rupees Twenty Six Lakh Thirty Six Thousand Eight Hundred Nine and Forty Five Paise Only

Approximate Amount Put to Tender

Rupees Four Lakh Seventy Four Thousand Six Hundred Twenty Five and Seventy Paise Only

Rupees Thirty One Lakh Eleven Thousand Four Hundred Thirty Five and Fifteen Paise Only