PROVN OF SHED WITH SITTING FACILITY, 08 X TENT PLINTHS FOR RDP CONTINGENTS AND SPL REPAIR TO SEWAGE LINE, CONNECTED WORKS FROM GATE NO 3 TO GATE NO 4 AT CPG IN THE AREA OF AGE B/R-I AND PROVN OF 01 X TOILET WITH WASH BASIN AND URINAL POINT BEHIND GU

Amount

Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil. Complete all as specified and directed by Engr-in- Charge.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/ loose soil.

M&L for PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in foundation, filling in mass concrete complete all as specified and directed.

M&L for MS Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe-410) including distance pieces, cleats etc complete all as specified and directed by Engr-in-charge complete all as specified and directed by Engr-in- Charge.

M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as spfd & directed.

M&L preparation new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as spfd.

M&L for sand filling under floors or in foundations including watering and consolidation. complete all as specified and directed by Engr-in- Charge.

M&L for 75mm thick plain cement concrete 1:3:6 type C- 2, (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engr-in- Charge.

M&L for rubber moulded glossy finished machine pressed precast Chequered cement concrete tiles grey cement and pigment of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick layer screed bedding in cm 1:6, complete all as specified and directed by Engr-in- Charge.

M&L PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in- Charge.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundationot exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/ loose soil, Complete all as specified and directed by Engr-in- Charge.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on planot exc 6m mean radius built in cement mortar (1:6),Complete all as specified and directed by Engr-in- Charge.

M&L for hardcore of broken bricks of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface,Complete all as specified and directed by Engr-in- Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.,Complete all as specified and directed by Engr-in- charge.

Removing excavated material (Soil) not exc. 100m and depositing where directed at a level not exc. 1.5 m above the starting point

M & L 75 mm thick Cement concrete work as in floor type B-1 , 1:2:4 (20mm graded aggregates) laid in alternative panels, with finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed

M & L for TMT mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Complete all as specified and directed by Engr-in- charge.

M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed.,Complete all as specified and directed by Engr-in- charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.Complete all as specified and directed by Engr-in- charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as per specified and directed by Engr-in-Charge.

M & L for 16-18 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, walls, window cills, cooking platforms and like in including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding, over and including 10mm thick screed obedding layer in CM 1:3, complete all as specified and as directed .

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)Complete all as specified and directed.

Demolation of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Surface dressing not exc 15 cm deep and getting out in soft / loose soil,complete all as specified complete all as specified and directed.

Description all as per item No -11 here-in-before but depth exc 1.50m but not exc 3.00m

Demolition of cement concrete of any description and in any position not otherwise specifically provided for incl disposal of debris to a distance not exceeding 500 mtr. Complete all as specified and directed.

Demolition of brick work Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlesComplete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150mm bore pipe

Description all as per item No -28 above but 200mm bore pipe

Description all as per item No -28 above but 300mm bore pipe

M&L for Plain Cement concrete (1:3:6) Ty C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete,Complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Add or deduct for each 25 mm girth or part there of over or under 30cm ditto complete all as specified and directed.

S&F mild steel Hand rails, half round straight portion, MS rungs in manhole drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 Complete all as specified and directed.

M&L for Concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 all as specified and directed for 300mm bore pipe. Complete all as specified and directed.

M&L for Concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 all as specified and directed for 200mm bore pipe. Complete all as specified and directed.

M&L for Concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 all as specified and directed for 150mm bore pipe.Complete all as specified and directed.

M&L for salt galzed stone ware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed complete incl testing complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collarsComplete all as specified and directed.

Supply only liquid water proofing compound.

S & F for Precast RCC covers 75 mm thick medium duty conforming to IS-12592 of any shape and size as per requirement at site ,complete all as specified and as directed.

M & L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves, complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of primer, any tint on new brick, kerb stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of new surfaces, complete all as specified and as directed.

Cleaning old sewage lines any Dia and cleaning of sludge with water from soakage well with mechanically operated 25 tonne truck mounted de-sludger with 12000 litre capacity tanker having water fitted high pressure Jet machine for cleaning and sludging of sewage line, sockage well, septic tank etc, shall be used by the contactor at per schedule program in written and completion of each job to the entire satisfaction of Engineer-in- charge as instructed. Note:- (a) Per day means 8 working hours in a day excluding standby period due to any reason. (b) The Contractor shall deploy sewage sucker machine on date as directed by the Engr-in-Charge and damage @ Rs 2000/- per day wil be recovered for delay period.

Description all as per item No 11 but in hard rock.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished

M&L for reinforced cement concrete (design mix) M-25 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete

Description all as per item 17 above but TMT bars 8mm dia and over, as in stirrups, spacers and binders complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, finished even and fair complete.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).complete.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&L for reinforced cement concrete (design mix) M-25 as in Columns, pillars, piers, posts and struts complete.

M&L for reinforced cement concrete (design mix) M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete.

M&L for reinforced cement concrete (design mix) M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete.

S&F for steel windows or ventilators, fixed type, with glazing bars complete.

S&F for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5sqm in each pane complete.

M&L for 1.00mm thick mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete.

S&F for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F for factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F for 100mm long SS butt hinges, medium weight, cold rolled mild steel, and fixed

S&F for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed

S&F for 150mm long extruded aluminium alloy handles, fabricated type, anodised

M&L Rendering 12 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) and finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

Description all as per item No 71 above but 20 mm bore.

S&F white colour Rotational moulded polyethylene water storage tank 1000 litres capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

S&F for vitreous China squatting pan of pattern “long pan”, size 630 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe)

S&F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S&F fancy type chromium plated 15 mm dia stop cock/angle cock/ angle cock, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union.

S&F PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed.

S&F fancy type chromium plated bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule

S&F Vitreous China wash basin, white, flat back, size 630x450mm with waste, chain and plug and porcelain stopper, flush pipe & brackets etc.

S&F fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S& F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe incl waste coupling, urinal spreder & flush pipe complete.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

S&F Hubless CI pipes of 100 mm nominal diameter ( single socketed in any length with rubber ring joints including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed.

Description all as per item No 85 above but 75mm nominal outside diameter.

S&F Hubless CI 100mm dia (single T), branch piece, equal or unequal provided with access door complete all as specified and directed.

S&F 100 mm bore CI hubless bends/shoes any radius complete all as specified and directed

Description all as per item No. 88 above but 75 mm bore.

S&F UPVC (SWR) 110 mm Nahani trap with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

S&F UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement including jointing to waste pipe in cement concrete complete all as specified and directed.

S&F CI Hubless 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access door complete.

S&F CI Hubless 75mm bore Cast iron cowls

S&F 75 mm pipe, stack clamps out of 50mmx 5 mm flat iron and 16 mm dia round iron stamp including bolts and nuts and securing ends of stays to walls or roof complete all as specified and directed.

S & F for Precast RCC manhole covers of size required at site 100 mm thick medium duty factory made test load 10 tons (MD-10) conforming to IS-12592, complete all as specified and as directed.

M & L 75 mm thick Cement concrete work as in plinth protection type C-1, 1:3:6 (using 20mm graded aggregates) laid in alternative panels,with finishing cement concrete surface even and fair complete all as specified and directed

M&L for prepration of newly plastered surface of wall and applying 2 coats of OBD over a coat of primer complete.

M&L for prepration of newly plastered surface of ceiling and applying 3 coats of white wash complete.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm to 300mm bore pipe.

M&L for point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet with cover plate for fixing modular switches/sockets/fan regulator etc complete all as directed

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

Description all as per Srl Item No 101 here-in-before but with 4 sqmm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F in replacement Modular switch 6 Amp, 1 way, 1 module size complete all as directed. Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S&F in replacement Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed. Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular switch 16 Amp, 1 way, 1 module size complete all as directed. Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.Make-Indoasian shynora,Anchor Roma,LegrandArteor or equivalent.

S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

S & F in replacement LED energy efficient integrated battens fittings, Aluminium extruded heat sink with shatter proof opal shell of Aluminium housing, 10 Watts, cool/warm white as per site requirement, complete all as specified and as directed.

S&F of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm and depositing the old U/s item to MES store yard.

S & F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 8 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F of MCB SPN B Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core, complete all as specified and as directed.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Gaurav India Corporations (BID ID -3451058)

Akhil Enterprises (BID ID -3451782)

Gaurav Construction Company (BID ID -3451127)

Choudhary Enterprises (BID ID -3451504)

M/S GEETANJALI ENTERPRISES (BID ID -3451906)