Construction of New Corporation Office building at SF No 218 2,226 1,226 2,227 Tambaram City Municipal Corporation Tambaram Chengalpattu District

Amount

Clearing scrub Jungle and Surface dressing of the ground. The rate including hire charges of all machineries, removing of all rubbish from site, lead upto 50m, transportat charges and labour charges etc., complete complying with standard specification.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

First Depth Upto 2m

Second Depth 2m - 3m

Carting away surplus excavated earth available with in the campus, is to be carted to the required locations within the campus. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling, breaking of clods, consolidating and sectioning the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supplying and Filling with Crusher stone Duct in foundation and others sub structures for 150mm & 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of Crusher stone Duct , compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Providing and laying plain cement concrete 1 : 4 : 8 ratio of (1 cement , 4 Msand and 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 150 mm & 100 mm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.

Brick work in following Cement Mortar using best quality of Second Class Table Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for cement mortar 1:5 (1 of Cement : 5 of manufactured sand using minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Country brick manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls. The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and spraying the same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers.

Providing and laying in position, Standardised Concrete Mix M-40 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 440 kg/mᶾ and maximum water cement ratio of 0.40, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5136 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Below Plinth Beam

In Ground floor

In First floor

In Second floor

In Third floor

In Terrace Floor

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Below Plinth Beam

In Ground floor

In First floor

In Second floor

In Third floor

In Terrace Floor

Supplying and erecting Centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

Supplying, fabricating and fixing in position of Steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

AAC Block Work using Self curing AAC mortar joint 2-3mm thick inbetween the blocks with a spread of 170sqft/40 kg ,cement mortor 1:6 ( One of cement and Six of M Sand) along the boundaries using block of size 600x200x200mm having minimum average crushing strength of 50Kg/sqcm in foundation & basement including dewatering wherever necessary proper setting curing , Sill Beam Concrete etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers

Stilt floor

In First floor

In Second floor

In Third floor

In Terrace Floor

ACC Block partition wall in AAC mortar joint 2-3mm thick 600x200x100mm thick for superstructure having minimum average crushing strength of 50Kg/sqcm. including labour for fixing the doors,windows and ventilator frames in position fixing of hold fasts scaffolding, Sill Beam , curing etc. complete in all respects complying with relevant standard specifications and drawings and as directed by the departmental officers.

In First floor

In Second floor

In Third floor

In Terrace Floor

FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of ('U' channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of ('U' GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work

Double Leaf Door DD (2000mmx2400mm)

Double Leaf Door DD1 (1500mmx2400mm)

Double Leaf Door DD2 (2000mmx2400mm)

Single Leaf Door D (1200mmx2400mm)

Single Leaf Door D1 (1000mmx2400mm)

Single Leaf Door D2 (900mmx2400mm)

Single Leaf Door D3 (1200x2400mm)

Single Leaf Door D4 (1200x2400mm)

Single Leaf Door D4a (1200x2400mm)

Single Leaf Door PHD (1200x2400mm)

Single Leaf Door TD (1000mmx2100mm)

Providing and fixing casement Doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1200mm x 2400mm with following specification: a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS g. Door Closer with Standard Arm Finish: Silver h. Lock Set: Dead Lock with both side key i. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame o. Rated Glass Schott Pyran with Frame The above assembly mounted on concrete or brick/ Block wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the Departmental Officers.

FSD (1200x2400m)

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine river sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Providing Polymer Coating ( Water Proof Coating ) for basement portion & toilet sunken portion with following specification and the surface shall be cleaned to remove all dust,foregin,matters lose matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio asper recommendation of the supplier. the mix shall be stirred thoroughly until no bubbles remain in the mix. any lumps found in mix shall be removed. apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. after drying,second coat shall be applied on the first coat as directed by the departmental officers etc. the rate inclusive of cost of materials and labour etc., complete

Supply and Painting two coats of newly plastered wall surface and Ceiling with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Supply and Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and Laying the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supply and Laying of Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

300x450mm 8mm tk

Supplying and laying in STAIRCASE GRANITE flooring with fully polished Jet Black Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of not less than 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge

Supplying and laying in flooring with Flamed Steel Grey Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine Pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

UPVC Window :Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Windows of casement type (open) from the profile the size of outer frame 60mmx58mmandshutterprofilearereinforcementwithGI/1mm125GSMand 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDMrubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided withEspag multi power point locks and also it operates ashandle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to theshutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong lockingsystems and as per size for arresting noise and energyloss. The connecting mechanism between sash andouter frame that enables opening of the window. Thewindow should be fixed to the wall with 100% packingwith screws and silicon packing all round the frames.The window should be got approved from the Departmental Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, Cost of Interior Plastic Emulsion painting, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specication.

Supplying and fixing of paramount radiant barrier reflective insulation 50mm tk composed of three layers of polyethylene from one diamond-cut layer (to create the air pocket ) sandwitched between two layers of chemically cross linked closed cell polyethylene foam factory laminated with pure aluminium foil ( A low emitting material ) on outer side of foam material Addtionally

Providing and fixing powder coated aluminium fixed louver provision using Jindal/equivalent 63x38x1.5mm thick box section for outerframe, fixed with 100mm width ‘Z’ type louver blades with necessary hardwares etc.

Supply and fixing Openable Glass Door the rate inclusive of conveyance to site and labour charges and materials As per design other materials to be used shall be got approved by the Executive Engineer concerned before use on worketc., complete.

Supply and fixing Main Entrance above fixed glazing in front entrance area the rate inclusive of conveyance to site and labour charges and materials As per design other materials to be used shall be got approved by the Executive Engineer concerned before use on worketc., complete.

Supply and fixing Interior Room Openable Dooe With fixed glazing in Floor area the rate inclusive of conveyance to site and labour charges and materials As per design other materials to be used shall be got approved by the Executive Engineer concerned before use on worketc., complete.

DD 1.5 (1500x2400mm)

Providing RCC Drops (Koungai) 50mm tk Using 12mm Chips (1:1.5:3) Packing work and Plastering CM 1:3 Both side and steel reniforcement veritical and horizontal With Chicken mesh tying on both side two layer and scaffolding charges extra Work

Supply and Laing of Elevation Band Work includes all Material and Labour cost As per design in the drawings, the rate inclusive of conveyance to site and labour charges and materials As per design other materials to be used shall be got approved by the Executive Engineer concerned before use on worketc., complete. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Big Pillar - 6 Mtr - Top & Bottom

Small Pillar - 3 Mtr - Top & Bottom

Window 3 Mtr X 3 Mtr

Top Border - 1 Mtr

Kodungai - 1 Mts

Roof Border - 1 Mtr

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing the best quality approved make of bip cock with C.P. health faucet wall hook one metre long flexible tube, angle cock with wall flange including cutting and making good the walls wherever required etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Executive Engineer before use on work.

Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm testing and commissioning approved make white colour urinals with flush valve.The quoted price shall also include Urinal flush valve with 15mm size control cock with 8mm dia 300mm long connecting pipes and nuts etc., complete (The water closet should be got approved by the Executive Engineer before use on works

Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. (The Wash basin should be got approved by the Executive Engineer before use on works.

Supplying and fixing heavy duty CP Wall Mixture Tap 3 in 1 system with Hand Showers with Shower Arm with Overhead Shower Rose, CP spout, etc.,complete with CP wall flanges. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.

Supplying and fixing Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials including cost of teak wood plug & CP screws etc., complying with standard specification and as directed by the Department officers.

Supply and Fixing of Automatic Electrical Water Heater with copper container, with Glass Wool / Puf Insulation with MS powder coated shell suitable for 25 Litres capacity 230V / 1000W (Higher End). The rate is inclusive of labour charges, transportation, loading and unloading etc complete as directed by the departmenyt in charge.

Supply and Fixing , Unloading, receiving, storing, installing, testing and commissioning of approved make stainless steel sink of size 1200 x 550 x 180mm, 40 mm waste coupling , sink cock with connection pipe, 1 nos angular stop cock for cold water, MS bracket for mounting the sink and painting the bracket with two coats of enamel paint of approved colour over a coat of primer etc. Complete.(Pantry) Note :- MS brackets cost not included in the PHE BOQ, The same is included in the Civil BOQ.

100mm dia (For Urinal & wash basin outlet pipe )

150mm dia (For EWC & Floor trap )

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

a) 75mm dia (6kg/sq.cm pressure rated - Type - B)

b)110mm dia (6kg/sq.cm pressure rated - Type - B)

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 10 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

a)40mm dia (10kg / sq.cm)

b)50mm dia (10kg / sq.cm)

Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).

Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works.

20 mm dia

25 mm dia

32 mm dia

40 mm dia

Supplying & fixing in position first quality & approved variety of various dia C.P.V.C Ball Valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

80 mm dia

Providing and fixing gun metal Non- return valve of approved quality With Accessories.

50 mm nominal bore

Supplying and fixing in position first quality and approved Strainers shall be of “Y” type strainer bronze body PN 20 Series with perforated stainless steel screen 0.75mm diameter perforations for ‘fine’ straining free flow area per the square cm. of element area. strainer shall be with screwed cap and shall be fitted with gland cock (hose union type) for blow down connection and shall also have drilled and tapped bosses on each side of the body fitted with 2 test points and 2 plugged points, flanged to IS PN20 or with ends threaded etc., complete complying with standard specification and as directed by the Department officers. The quality and make of valve should be got approved by Executive Engineer before use on work.

80 mm nominal bore

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

a) 63mm dia (6kg/sq.cm pressure rated - Type - B)

b) 75mm dia (6kg/sq.cm pressure rated - Type - B)

c)110mm dia (6kg/sq.cm pressure rated - Type - B)

d)160mm dia (6kg/sq.cm pressure rated - Type - B)

Supply and Fixing of PVC Special Items Including cost of all materials and Labour , etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

PVC - Elbow

PVC - Door Elbow

PVC - Tee

PVC - Door Tee

PVC - Shoe

PVC - Double Y with Door

Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Shaft,Terrace & External Pipes)

Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Shaft,Terrace & External Pipes)

CPVC - Elbow 20mm

CPVC - Elbow 25mm

CPVC - Elbow 32mm

CPVC - Elbow 40mm

CPVC - Tee 20mm

CPVC - Tee 25mm

CPVC - Tee 32mm

CPVC - Tee 40mm

CPVC - Coupler 20mm

CPVC - Coupler 25mm

CPVC - Coupler 32mm

CPVC - Coupler 40mm

CPVC/UPVC - Reducer 25mm x 20mm

CPVC/UPVC - Reducer 32mm x 25mm

CPVC/UPVC - Reducer 40mm x 32mm

Supplying and fixing PVC cowl of following size to vertical Soil/Waste pipes above terrace level. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

External Sewerage Work

a)75mm dia (6kg/sq.cm pressure rated - Type - A)

b)110mm dia (6kg/sq.cm pressure rated - Type - B)

c)160mm dia (6kg/sq.cm pressure rated - Type - B)

d)200mm dia (6kg/sq.cm pressure rated - Type - B)

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works).

110mm dia (6kg/sq.cm pressure rated - Type - A)

160mm dia (6kg/sq.cm pressure rated - Type - A)

200mm dia (6kg/sq.cm pressure rated - Type - A)

Supply and Fixing FRP Tank with Including of all materials and labours - 30000 lits capacity

Supply, installation, testing and commissioning of local electricity board certified H.T Breaker panel- VCB KIOSK extensible type for future requirement. The Panel shall be made out of 2.5mm cold rolled, mild steel, metal clad, free standing, totally enclosed, cubical type and compartmentalised suitable for operation on 11kV, 3phase, 50Hz, AC earthed system with busbar interconnections, control wiring, designation labels, Caution notices, pad locking facilities wherever required. Necessary space provision for entry of HT cables from the bottom through detachable gland plates.The Panel shall be finished with one coat of Air drying Epoxy primer and two coats of Epoxy paints of shade 631 0f IS:5Siemens Grey paint finish. Panel consists of : 4 Nos 11 KV 25KA 630 Amps VACUUM CIRCUIT BREAKER Switchboard comprising Two VCB Feeder Panel to control 1no of 1000 KVA & 1 no 800 KVA OLTC Transformers with all neccessary protections complete as per following Specifications ( 2 IN & 2 OUT )

Each Panel comprising: a. 1nos. 3P VACCUM CIRCUIT BREAKER (630A), horizontal drawout, horizontally isolated type,,11kV,25kA with Motor operated Spring charged Mechanism, Anti Pumping Device, The rate shall be inclusive of power pack suitable for input voltage 230VAC, output voltage 110V DC OR 220V DC110 V DC, Shunt Trip and Closing Coils, Mechanical Operation Counter, 4 NO + 4 NC Spare Aux. Contact with contact multiplication contactor for customer use, Automatic safety shutter, Mechanical Close/Trip knob, Mechanical ON/OFF Indication, Operating Handle, 110 V AC to 110 V DC Power Pack etc. all standard accessories. b.Potential Transformer, Resin cast fixed type , 100VA, Class:0.2, 11KV/V3/110V/V3 complete with HT and HT HRC Fuses - 3 Nos. c.Current Transformer resin cast type of 300-150/5 Amps. Dual Core ( Core 1 -15 VA class 0.5 for Metering, Core 2 – 15 VA 5 P 10 for Protection)-for incoming breaker - 2nos Current Transformer resin cast type of 50/1-1Amps. Dual Core ( Core 1 -15 VA Class 0.5 for Metering, Core 2 – 15 VA 5 P 10 for Protection) - for outgoing breakers - 2nos

HT CABLE & TERMINATIONS

Supplying and laying of HT under ground XLPE cable having aluminum conductor, extruded Flame retardant PVC outer sheathing steel wire/tape armoured & the inner sheath with polypropylene, suitable for 11KV class confirming to IS.(Length is From11kV HT line to the Premise to get the power). 3C x 300Sq.mm XLPE Cable SOR P 152 (b)

Supplying and making of HT heat shrinkable resin cast UG cable termination suitable for 11KV HT cable. Indoor type 3C x 300Sq.mm XLPE Cable

Supply, laying and testing of 1.1KV grade PVC insulated copper cables (YFY) as per specification. The rates quoted shall be for laying in trays, cable trenches (indoor and outdoor), pipes, etc. For buried cables, the are shall include excavation works for outdoor cable laying."

24 Core x 2.5 Sqmm Cable (PVC)

12 Core x 2.5 Sqmm Cable (PVC)

2 Core x 2.5 Sqmm Cable (PVC)

TERMINATION CONTROL CABLES (COPPER) Supplying and providing the end terminationa\s with copper lugs for all the above cables with Double compression brass cable glands, taping, crimping, gland and amour earthing, etc. complete as required.

24 Core x 2.5 Sqmm Cable (PVC)

2 core 2.50 sqmm

Supply and fixing in position the best quality danger boards of approved shape and size as specified by the local electrical authorities written in Tamil , English, and local language.

Supply and Installation of HT cable route markers including PCC bed complete with all necessary fixing accessories etc.,.

Supply and fixing of 11kV grade hand gloves IS approved.

Preparation of electrical shop floor drawings before execution, as fitted drawing after completion, and submission of Black & white A2 size - 3 copies, A2 size SLD in the Teak wood board and Phase identification & Physical location drawings duly laminated .

Supply and Installation of 5nos.in each set dully filled with fine sand fire buckets curved bottom with MS floor stand as per requirement of local authorities.The Fire buckets shall be painted red from outside and white from inside with suitable accessories complete as required(as per EB std).

Supply and fixing of 5 kgs capacity CO2 type fire extinguisher with mounting hook,all complete as required.

Supply and fixing in position 1000mm wide insulation mats made of elastomer of 11KV grade as IS-15652-2006

Supply of first aid box as per standards

Processing of form on behalf of client, getting sanction of power-Total contract demand load . The rate shall be inclusive of Filing the completion report for the LOCAL EB, CEIG portion of work to the Electrical Inspectorate authorities, getting the inspection done at site, filling the compliance report, getting the approval from Electrical Inspectorate authorities and getting the approval from EB etc., including liason with EB, CEIG for obatining power sanction, filling up of applications if any complete as required.All official payments against receipts will be paid by client.

MV CABLE LAYING

Supply 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Aluminum conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 3.5 core 300 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Aluminum conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 3.5 core 240 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Aluminum conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 3.5 core 120 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Aluminum conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 3.5 core 70 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Aluminum conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 3.5 core 35 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Aluminum conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 3.5 core 25 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured aluminium conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 4 core 16 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured copper conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 4 core 16 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Aluminum conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 4 core 10 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Copper conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 4 core 6 sqm

Supply of 1.1 kV grade 1C/3C/3.5C & 4C stranded XLPE(above 6 sq.mm)/Class A PVC insulated(below 6 sq.mm), FRLS Armoured Copper conductor cables conforming to IS:7098/ IS-1554 Part I (with latest amendments). Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975l. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. 4 core 4 sqm

Supply, Laying, Testing and Commissioning of 1.1 kV grade 1Cx25sqmm unarmoured cables (above 6sqmm) / Class A PVC insulated(below 6 sq.mm), FRLS Armoured Copper conductor cables conforming to IS:7098/ Part I (with latest amendments) laid on wall / ceiling / trench / cable rack with the proper clamping,etc as required. The cost of the nylon tie and overlapping GI strip shall be included in the cost of installation. Cable identification labels at both ends clearly mentioning the cable specs & also at appropriate intervals along the cable route should be provided. Inner sheath: Extruded PVC only for Multicore, Outer sheath: Extruded Type ST2 PVC with FRLS, Armour: Galvanized Steel strip/Wire for multicore with all lead and Lifts and as directed by the Engineer-In-Charge of the work. 1Cx25sqmm

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

3.5X25 sqmm(28mm)

3.5X35 sqmm(32mm)

3.5X70 sqmm(38mm)

3.5X120 sqmm(45mm)

3.5X240 sqmm(62mm)

3.5X300 sqmm(70mm)

Part-A- LT Panels

LT PANEL BOARDS WORKS Supplying, Installation,unloading,,storing ,shifting,Testing & commissioning of Form 3B compartment LT panels as per IEC-61439, suitable for 415V, 3 phase, 4 Wire 50 Hz AC supply system of suitable size fabricated in compartmentalized design, from CRCA sheet steel of 1.6 mm thickness for internal partition , 2mm thickness for frame work, body, Shell and covers, 3mm thickness for gland plates with stiffeners where ever required and shall be dust and vermin proof construction.All doors to have double rubber/foam gasket with shutter assembly & door seating frame.The Panel shall be fully as per the requirement of CEIG/Electrical Inspectorate/ EB authorities. The panel must be a vibration free structure which is chemically treated wth seven tank process before painting for surface treatment and powder coated with two coats of Zinc chromate primer and two coats of paint of approved shade or RAL 7032. Fire and corrosion resistant coating similar to VIPER FR-1101 applied in two coats with necessary primer. bussbars :Aluminium/ Copper busbars of Electrolytic grade conductivity as per standard IS 5082. Bus bar supports:Fire retardant DMC/FRP/SMC. Bus bar joints: Shrouded/Tinned. Aluminum bus bars shall be bare with color coding at the ends/Copper shall be bare with color coding at the ends/For Humidified areas the copper bus bars shall be coated with tin. The current density for Aluminium busbars shall be 0.8A/sq.mm and The current density for Copper busbars shall be 1.2A/sq.mm.Louvers shall be provided for all the bus bars chambers (Horizontal & Vertical) with mesh to meet IP Requirement. All vertical bus bars in bus bar alley shall have bottom supports. All UPS outgoing panels shall have neutral busbars double the size of phase & gland plates should be of alluminium.

All ACBs shall confirm IS 13947-1/IEC 947-1 for general rules & IS 13947 rules & IS 13947-2/IEC 947-2 for Circuit breakers. All protection releases for ACBs/ACBs shall be as per SLD. All MCCB/ACB's shall be Cat: A except ACB's for Ltg & raw power input distribution panel shall be with Cat: B . All ACB, MCCB's shall have 2EA. NO + 2EA of NC Auxiliary contacts. Auxilliary contactor to be provided along with auto-manual switch where ever required. All MCCB's shall have plug EAting from (70 -100%) for < 250A & (40 - 100%) for > 250A All Breakers both Incoming & Outgoing shall have LED 'ON / OFF / TRIP' indications without fail. CTs shall be of cast resin / polycarbonate split core type only.All AC feeders will have time delays of 0-60 Seconds. All MCCBs of 250A and above for non-ups loads Should be microprocessor based only and for UPS panels shall be with thermal releases. All MDMs to be of dual source Mts unless otherwise specified. ics should be 100% icu for service voltage. Any other percentage shall not be accepted. The MCCBs of 250A and above shall have flag indication for tripping.

(All the Incommer ACBs/MCCBs of LT Kiosk, main panel,HVAC panel, Utility panel , fire panel and Emergency power panel shall be compatible to be integerated with BMS(RS 485) and shall be provided with Remote operation, RS485 protocol and shall be able to remotely read and the paraMts for protection functions. Consult history files, maintenance indicators and control & monitoring the breakers. The ACBs shall be provided with making current release for self protection of the breaker in case of closing on fault current also shall have reverse power and phase sequence protection .including wiring for interconnections complete as required.) All ACB & MCCB's should have 2nos. of Potential free Contacts for the BMS integration without fail.

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board (DG SYNC PANEL )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board (MAIN EB DG PANEL )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board ( UTILITY PANEL )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board ( CAR CHARGING PANEL )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board ( MAIN LIFT PANEL )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board ( LIFT POWER )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board ( LIFT POWER PANEL FIRE LIFT)cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board (APFCR PANEL-1 )250KVAR cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of LT Switch board (FLOOR SUB PANEL )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

Part-B - Cable Trays

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

600 mm width X 75 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

600 mm width X 75 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

600 mm width X 75 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

600 mm width X 75 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

600 mm width X 75 mm depth X 2.0 mm thickness

Supply and installing 300mm x 50mm Ladder type - Hot Dip Galvanised weldless construction, factory assembled bolted rung type, Hot dip galvanised GI as per IS 2629, made out of Hot Rolled steel sheets of 1.6mm thickness conforming to IS 1079 Grade O. Finish shall be Hot Dip Galvanized 65 Microns for 1.6mm and above thick material conforming to IS 2629. Couplers shall be 2.0mm thick (Hot Dip Galvanized), Plate type with 4 holes. pre galvanized steel runner and seated rungs. Including cable support system, including horizontal and vertical bends ,anchor fastner and C channel,GI bolt, reducers, tees, cross members at 300 mm interval and other accessories as required and duly suspended from the ceiling with fabricated MS angle supports at 1000 mm interval, etc as required. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.

Supply and installing 600mm x 75mm Ladder type - Hot Dip Galvanised weldless construction, factory assembled bolted rung type, Hot dip galvanised GI as per IS 2629, made out of Hot Rolled steel sheets of 2.0mm thickness conforming to IS 1079 Grade O. Finish shall be Hot Dip Galvanized 65 Microns for 2.0mm and above thick material conforming to IS 2629. Couplers shall be 2.5mm thick (Hot Dip Galvanized), Plate type with 4 holes. pre galvanized steel runner and seated rungs. Including cable support system, including horizontal and vertical bends ,anchor fastner and C channel,GI bolt, reducers, tees, cross members at 300 mm interval and other accessories as required and duly suspended from the ceiling with fabricated MS angle supports at 1000 mm interval, etc as required. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.

Supply and installing 1000mm x 75mm Ladder type - Hot Dip Galvanised weldless construction, factory assembled bolted rung type, Hot dip galvanised GI as per IS 2629, made out of Hot Rolled steel sheets of 2.0mm thickness conforming to IS 1079 Grade O. Finish shall be Hot Dip Galvanized 65 Microns for 2.0mm and above thick material conforming to IS 2629. Couplers shall be 2.5mm thick (Hot Dip Galvanized), Plate type with 4 holes. pre galvanized steel runner and seated rungs. Including cable support system, including horizontal and vertical bends ,anchor fastner and C channel,GI bolt, reducers, tees, cross members at 300 mm interval and other accessories as required and duly suspended from the ceiling with fabricated MS angle supports at 1000 mm interval, etc as required. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.

Supply and Fabrication and installation of MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such a s grouting, finishing etc. and painting with two coats of primer and two coats of enamel paint as required.

Part-C - Wiring

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open PVC pipe power Plug point ( 8 points / Coil) Higher End

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A two way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire with painting of Suitable colour for Open PVC Stair case Light point Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire withpainting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5points / Coil) Higher End-As perSD 281.

1 light point controlled by a 6A switch SD 281

2 light points controlled by 6A switch SD 281+DATA

3 light points controlled by 6A switch SD+DATA

4 light points controlled by 6A switch SD+DATA

5 light points controlled by 6A switch SD+DATA

6 light points controlled by 6A switch SD+DATA

6-10 light points controlled by 6A switch SD+DATA

3 light points controlled by 6A/10A MCB SD+DATA

5 light points controlled by 6A/10A MCB SD+DATA

6 light points controlled by 10A MCB SD+DATA

7 light points controlled by 10A MCB SD+DATA

8-12 light points controlled by 10A MCB SD+DATA

13-20 light points controlled by 10A MCB SD+DATA

21-28 light points controlled by 10A MCB SD+DATA

Ceiling Fan points controlled by 6A switch with step type regulator

Exhust Fan points controlled by 6A switch with socket near the fan

Carcharging point 1 phase 25A industrial plug & socket

Carcharging point 3 phase 32A industrial plug & socket

Part-D - DB Supply

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBO/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, Single pole, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, Single pole, 240/415 V, 10 kA, "D" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 40A rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63A rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 25A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker with overload current (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker with overload current (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing & Fixing MV Danger notice Plate of 200x150mm made of mild steel, at least 2mm thick & vitreous enameled white on borh sides, and with inscription in single Red color on front side as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

For 8 way, Double door SPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.

For 4 way, Double door TPN MCBDB

For 6 way, Double door TPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Part-E - Earthing

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and laying following sizes of 75mmx10mm GI strips including supply of fixing clamps and accessories when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building and interconnections with earth pit and equipment, terminations/ interconnections in an approved manner as per IS:3043 (with latest amendments) inclusive of supply of all hardwares complete as required.GI conductor joints shall be bolted and joints shall be protected with bitumen paint.Copper conductor joint shall be brazed or rivetted .The equipment connection shall be bolted using galvanized hardware or bolted by using passivated hardware.

Supply and laying following sizes of 50mmx6mm Copper Earth stripsstrips including supply of fixing clamps and accessories when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building and interconnections with earth pit and equipment, terminations/ interconnections in an approved manner as per IS:3043 (with latest amendments) inclusive of supply of all hardwares complete as required.GI conductor joints shall be bolted and joints shall be protected with bitumen paint.Copper conductor joint shall be brazed or rivetted .The equipment connection shall be bolted using galvanized hardware or bolted by using passivated hardware.

Supply and laying following sizes of 50mmx10mm GI strips including supply of fixing clamps and accessories when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building and interconnections with earth pit and equipment, terminations/ interconnections in an approved manner as per IS:3043 (with latest amendments) inclusive of supply of all hardwares complete as required.GI conductor joints shall be bolted and joints shall be protected with bitumen paint.Copper conductor joint shall be brazed or rivetted .The equipment connection shall be bolted using galvanized hardware or bolted by using passivated hardware.

Supply and laying following sizes of 25mmx3mm GI strips including supply of fixing clamps and accessories when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building and interconnections with earth pit and equipment, terminations/ interconnections in an approved manner as per IS:3043 (with latest amendments) inclusive of supply of all hardwares complete as required.GI conductor joints shall be bolted and joints shall be protected with bitumen paint.Copper conductor joint shall be brazed or rivetted .The equipment connection shall be bolted using galvanized hardware or bolted by using passivated hardware.

Supply, laying & Terminating of following 1.1kV grade, copper conductor, PVC insulated, unarmoured, power cables. The cables shall be laid on tray / hume pipe /in ready made trenches, with nylon cable ties at every 0.5-0.75 mtr etc., as required. Rate quoted shall exclude cost of tray / hume pipe 2 core 1.5 sq.mm armoured multi strand aluminium cable

Supply and laying following sizes of GI/Copper Wire/strips including supply of fixing clamps and accessories when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building and interconnections with earth pit and equipment, terminations/ interconnections in an approved manner as per IS:3043 (with latest amendments) inclusive of supply of all hardwares complete as required.GI conductor joints shall be bolted and joints shall be protected with bitumen paint.Copper conductor joint shall be brazed or rivetted .The equipment connection shall be bolted using galvanized hardware or bolted by using passivated hardware. 8 SWG GI Wire

Part-F - Miscellaneous & Safety Equipments

2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

Supply and fixing of shock treatment chart in English, Hindi & local language framed in glass framework. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.

Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

Supply of Rubber hand gloves suitable for 1.1KV. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.

First Aid Box complete with all First Aid Medicines

Providing and fixing Danger Plate Danger Plates shall be provided on HV and MV equipments. MV danger notice plate shall be 200 mm x 150 mm made of mild steel at least 2 mm thick vitreous enameled white on both sides and with the descriptions in signal red colour on front side as required. Notice plates of other suitable materials such as stainless steel, brass or such other permanent nature material shall also be accepted with the description engraved in signal red colour. with all lead and Lifts and as directed by the Engineer-In-Charge of the work.

AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

Fire Buckets made out of 40 x 40 x 6mm MS Angle

Earth Discharge Rod

Supply & Installation of MS support with 2 coats of anti rusting primer & epoxy enamel paint - Approval should be taken before operating the item.

2 hour fire rated fire retardant material sealing all electrical cutouts/ducts and openings made in the slab / wall / partition to take conduits / cable trays / raceways etc as required complete with all lead and Lifts and as directed by the Engineer-In-Charge of the work.

Part- G - Fans & Exhaust Fan

Supply and Fixing of 1200mm (48") Sweep AC Ceiling Fan Complete with stepped electronic 300W Regulator with the 1m down rod on the existing clamp

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of 400mm sweep wall mount Fan with Inculding all Fitting

Part-H - UPS Works

UPS SYSTEM & CONNECTED WORKS Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of UPS System ( UPS INPUT PANEL )cubicle type, complete as required as per Main SLD & M V PANEL ANNEXURE .

UPS SYSTEM & CONNECTED WORKS Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of UPS System ( UPS OUTPUT PANEL )complete as required as per Main SLD & M V PANEL ANNEXURE .

UPS SYSTEM & CONNECTED WORKS Supply, Loading,transportation Unloading, Storing, Shifting to Installation Loacation, Installation, Testing & Commissioning of UPS System ( 30 Kva UPS )complete as required as per Main SLD & M V PANEL ANNEXURE .

Part- I - Light Fixtures

Supply, Unloading, Storing, Fixing, Testing and commissioning of Circular/Square type recess/Surface monted 18 W LED Light Fixture with necessary channels/supports complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Supply, Unloading, Storing, Fixing, Testing and commissioning of 24w 2 feet x 2 feet surfcace mounted LED Light Fixture with necessary channels/supports, complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Supply,Unloading, Storing, Fixing, Testing and commissioning of 15w LED BULB Light Fixture with necessary channels/supports, complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Supply,Unloading, Storing, Fixing, Testing and commissioning of WT BULK HEAD Light Fixture with 11W CFL LAMP WITH CFL necessary channels/supports, complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Supply,Unloading, Storing, Fixing, Testing and commissioning of 20W LED 4 FEET Light Fixture with necessary channels/supports, complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Supply,Unloading, Storing, Fixing, Testing and commissioning of 18W LED 4 FEET Light Fixture with necessary channels/supports, complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Supply,Unloading, Storing, Fixing, Testing and commissioning of 18W LED 4 FEET Light Fixture with necessary channels/supports, complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Supply,Unloading, Storing, Fixing, Testing and commissioning of 18W LED 4 FEET Light Fixture with necessary channels/supports, complete as required and all other necessary fixing accessories required as per detailed specification and with all lead, Lifts and as directed by the Engineer-In-Charge of the work.

Part- J- Lightning Protection Works

PSupply of Early Streamer Emission Air Terminal (ESEAT). Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level

Supply of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter

Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection

Supply of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp

Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming MCC panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)

Part- K-CCTV

IP DOME CAMERAS Up to 2 megapixel (1920 × 1080) resolution  Standard video compression with high compression ratio  Progressive scan CMOS, capture motion video without incised margin  Support dual stream, and the sub-stream for mobile surveillance  High-performance and long service life Infrared LED, Approx. 20 to 30 Mts IR range  IR cut filter with auto switch  PoE (Power over Ethernet)  Ingress Protection level: IP66  Electronic shutter for different surveillance environments  Other functions: alarm, reset button, mirror, and including of all mounting acessories,etc.

Supply, Installation, Testing and commissioning of 16CHANNEL,HDMI,BNC&VGA output, 4 HDDs max 24TB, RAID5 configurable, Hot Swap, Digital Zoom, 3USB Ports, 4SATA, Dual Gigabit Network Ports, Redundant Power Supply, Electronic Image Stabilizer, 32Alarm Inputs & 4 Alarm Outputs, ONVIF, HDD to be calculated for 4CIF-25FPS-Continous Recording - 30days, HDD calculation to be shared along with datasheet. The rate shall include Minimum 5 User License and with Web Based Software, Mobile App for Android & Apple. NVR should be Rack Mountable ( 1 x 64TB Combination ).

Supply, installation, testing and commissioning of 24 ports Stackable Edge POE L2 managed Switch for CCTV including accessories & necessary arrangements with redundant power supply.

Supply & Fixing of 9U Rack,550x550 Rack/Welded With necessary accessories

Supply & Installation of 32" LED Professional Display with LAN port / all mounting bracket, connection card wire, remote control etc as per the specification. The braket shall be provided with adjustable type from wall for better servicibility.

Supply & Laying O. F.Cable 06F Outdoor - un-Armoured Unitube SM - HDPE Sheath

Supply & installation of HDMI over IP with POE Transmittor and receiver( cat6 to HDMI Coverter)

Part- L -TELEPHONE/TV SYSTEM

Supply and laying of outdoor multiplier 0.51mm dia annealed copper conductor of armoured PVC insulated and jelly filled telephone wires in the exsisting pipe/conduits etc., all complete as required.

200 Pair cable

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper condutor,unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel/PVC conduit as required.

NEC IP – EPABX configured for: Analogue Extensions: 200, expanadle Digital Extensions:8,PRI-4,Operator Console – 24 Keys- 1 No- with -60 DSS Keys.

50 Port Voice Panel 4 Nos

termination of Jack Panel 50 port 8 Nos

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Telephone socket outlet

TV antenna socket outlet

Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existing surface or recessed conduit/casing capping including making connections as required.

Supply and Installation of 8-way splitters in die cast Al.casing

Part- M -NETWORK SYSTEM.

Supplying & drawing UTP-CAT 6E LAN cable

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

RJ45/ I.O.outlet Cat-6

Supplying & Fixing of switch mounting rack with power manager&cable manager.

6U with 650mm depth

9U with 650mm depth

12U with 650mm depth

Supplying & fixing of Network switches

48Port Gogabyte(manageable)

24Port Gogabyte(manageable)

8Port Gogabyte(manageable)

Supplying & fixing of I/O socket with back box

Single I/O-RJ-11

Double I/O-RJ45

Supplying & fixing of….mtrs Cat6 Patch cable

Supplying & fixing of patch panel for LAN cabling

48 Port 10/100/1000 patch panel

24 Port 10/100/1000 patch panel

16 Port 10/100/1000 patch panel

DG Works

Suppllying,erection,testing and commissioning of below size of Diesel Generating Set on existing CC platform comprising of Diesel Engine @ 1500RPM confirming to BS 5514.The engine should be turbocharged,Air/water cooled with 10% over load for 1hour in every 12 hours of operation coupled to suitable capacity alternatorrated at 415V ,08pf (lag) 50Hz,3phase ,4 wire system,confirming to BS 5000/IS 4722.The alternator shall be of brushless type screen protected,revolving field .mounted on suitable channel Iron Base Frame,complete with suitable capacity Fuel Tank, required nos.of Batteries of 12/24V as per requirement, Acoustic enclosure as per CPCB approved Norms. 500 KVA

BUS DUCT AND BBT

a) All materials & work shall be as per standards, Confirming to IEC - 61439 -1 & 6, EB and Inspectorate rules & EB local practice. b) Final shop floor drawings to be prepared by the vendor before execution of the work & approval to be taken from the consultant / client. c) All tap unit shall have minimum of 300mm space between terminal of MCCB spreader and gland plate of Tap Unit for Cable termination / Cable extention BOX . d) All End feed unit shall minimum of 500MM space between terminal of MCCBs spreader/ terminals and gland plate of Tap Unit for Cable termination. e) All End feed unit shall have Extention box, extention busbar with adequate no of terminal for termination no runs of cable as per site condition. f) All MCCB End feed / tap of box unit shall have Spreaded extention terminal with phase barrier g) The vendor shall be responsible for coordination with Transformer, Panel vendor of BBT and BD with respective equipments. h) All End feed unit and Tap Of unit shall be earthed using proper size Braided Copper wires. i) The vendor Shall subimit during Bidding Technical specification sheet with brochures / catalogues and Detailed specification sheet for all auxiliary ,components giving material specifications,make/model, etc. j) IP- 55 & 54 for Indoor plugin box IP -66 for Out door ( with outer canopy)

Bus Bar Trunking system Supply, installation, testing and commissioning of 1100V, Sandwich type Bus bar trunking system . The earth flat shall be of Al and run external surface of Enclosure through out the length on eitheir side. include like straight joints, bends elbows, flange ends, phase cross over, End flange, End cover, Spring Hanger, Support mounting accessories complete etc . The length of Bus duct will measured on the centre line.

1000A 36kA 4P+E, with aluminum conductor and neutral rated for 100% .

1000A 36kA BBT Vertical Bend /ELBOW

Adopter box End connection with copper braided flexible. At Endfeed unit End. End with copper flexible connection...…End flange + adopter box + Cu flexible End with copper flexible connection...…End flange + adopter box + Cu flexible links.

End feed Unit . The unit shall have adequate space for terminating cables With Cable extenstion Box, Extenstion Bus bar terminal for termination of cables/BBT. 1000A End feed Unit 1000A, 440V, 50Hz. 3P+NL MDO ACB Type of release =Micro Processor type Icu =Ics=Icm =36kA For 1 sec . Instantanous Short Circuit setting Ii - (1-10) In. Short time delay Short Circuit setting Isc -(1 -10) In. Over load Setting I L = 40 - 100% In. Earth Fault Setting 20 - 100% In Shunt trip and Auxillary Contacts.

MCCB Take off/plugin unit . 430V, 50Hz. TP+NL/4P/2NL Manually operated type MCCB.with DKWH meter with serial port, CT, RYB indicator , The MCCB with spreader Phase barrier and Extenstion Bus bar terminal for termination of cables along Extensiton box.

Take off unit upto 160A .

Take off unit from 200A to 630A .

Miscellaneous Items plates and flats with Anchoring hardware, duly painted/ powder coated etc.,

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL

1.5 TR Split Type AC Unit - 5 Star Rated

2.0 TR Split Type AC Unit - 5 Star Rated

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay

Supply and fixing of MS stand for fixing outdoor unit

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit)

Supplying and Fixing of 13 Persons Passenger Lift (2000mmx1100mm) Gearless Lift without Machine Room for G +3 Floor As Per SR Page No 158 M-2091 the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & , fuels, fixing in position at all levels, heights, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supplying and Fixing of 20 Persons Passenger Lift Car Size (2000mm x 1500mm) Gearless Lift without Machine Room for G +3 Floor As Per SR Page No 158 M-2093 the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & , fuels, fixing in position at all levels, heights, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Road Works

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Bore WELL

Conducting physical survey for identification of suitable location for borewell including the loading, unloading and transporting charges for machineries etc., complete as per standard spedifications.

Drilling of 150mm dia Vertical bore in hard rock area using DTH RIG including labour charges for inserting casing pipe assembly in the drilled hole including the transporting charges for the rig and supporting vehicles etc complete

Supply of 150mm dia PVC casing pipe with including cost and conveyance of pipes to work site and all handling charges etc complete

Supply of 200mm dia PVC casing pipe with including cost and conveyance of pipes to work site and all handling charges etc complete

Supply and delivery of 3 Phase 1.50 HP Submersible pump 150x125 lpm/m set with including cost and conveyance to work site and handling charges etc complete

Supply and delivery of 3 Phase pannel board suitable for 2 HP Submersible pump set with including cost and conveyance to work site and handling charges etc complete

Supply and delivery of PVC insulated and sheathed 3 core 4 sqmm flat type copper cable confirming To IS 694/1990 etc complete

Supply and delivery of 50mm dia HDPE pipes in the bore well work with including all labour charges etc complete

Supply and delivery of GI specials and other jointing materials and including cost and conveyance to work site and handling labour charges etc complete

Nylon Rope 12 mm dia

8" dia Bore cap GI

50 mm MS clamp set

50mm SS Hose Collar

50mm SS Clamp

50mm dia Nipple

50mm dia GI Lbow

50mm dia GI Union

50 mm GM Non return valve

Errection Labour charges for sub pump set up to 5HP including all labour charges for Fixing pump set pannel boards and raising pipe work cable laying connecting works etc complete as per Specification

Earthwork Excavation for pipe line & Refiling as per Linear measurement for PVC pipes including all labour charges for excavation and refilling well ramming etc complete

Supply and delivery of 63mm dia 6kg/cm PVC Pipe with including cost and conveyance of all materials and including all labour charges etc complete

Lowering of 63mm dia PVC Pipe including labour charges for laying jointing to proper alignment and gradient etc complete as per standard specification

Supply and delivery of PVC Specials and GI specials and other jointing materials and including cost and conveyance to work site and handling labour charges etc complete

63x50 mm dia GI Reducer

63mm dia GI Coupler

63mm dia PVC Male adopler

63mm dia PVC Coupler

63mm dia PVC bend

Street Lights

Supply and Fixing of 6m Length single Bracket pole with Base plate 250x250x6mm 76.10mm OD x 3.65mm tk 6000mm length for street lights with including cost and conveyance to work site and handling charges etc complete

Supply and fixing of 30 W LED street light fitting Higher End with including cost and conveyance to work site and handling charges etc complete

Providing the Foundation arrangements for Earthwork , PCC concrete and J Bolt Accessories with including cost and conveyance to work site and handling charges etc complete

Supply and fixing of synthetics mould composite box for street light with including cost and conveyance to work site and handling charges etc complete

Supply and fixing of 16Amp MCB for on/off Switch Box with including cost and conveyance to work site and handling charges etc complete

Supply and fixing of 2C 4sqm inter connection fixing 56/0.3 page no 133 SOR for street light with including cost and conveyance to work site and handling charges etc complete

Supply and Laying of 3.5C 25sqm LTUG cable SD 204 for street light with including cost and conveyance to work site and handling charges etc complete

Supply and Laying of 50mm dia HDPE pipes for LT Cable work with including cost and conveyance to work site and handling charges etc complete

Supply and fixing of 120W Flood Light on Entrance Name borad Over Gate with including cost and conveyance to work site and handling charges etc complete

Supply and fixing of Oermental Compound wall LED Light fittings with including cost and conveyance to work site and handling charges etc complete

Supply and Laying of 2C 6sqm LTUG Cable with including cost and conveyance to work site and handling charges etc complete

GMS Elegant Builders I Pvt Ltd

Sri Balaji Constructions