Improvement of approach road from Mall road to Peter Hoff Shimla KMs 0/00 to 0/340. (SH- Construction of Breast Wall, Drain and Providing and Laying Bituminous Concrete in KMs 0/00 to 0/340 etc.) Under Shimla Smart City Project.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth, 1.50m in width as well as 10sqm on plan) including getting out and disposal of excavated earth complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge:- Ordinary rock.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.50m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. All kinds of soil

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size).complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:- 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size.) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 110mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B specification Clause 1904.2,503 and 508.1complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and applying tack coat using bitumen emulsion conferming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning the mechanical broom on bituminous surface @ 0.25kg/sqm complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Poviding and laying bituminous concrete using crushed stone aggregate of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling weith smooth wheeled, vibratory and tendem rollers to achieve the desired compaction and density as per specifications, complete and as per direcation of Engineer -in Charge. 30 mm compacted thickness with bitumen of grade VG-10 @ 5.5% (percentage) by weight of total mix) and lime Aggregate prepared in batch type Hot Mix Plant of 100-120 TPH capacity complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing and laying factory made kerb stone of size 300mm X 100mm X 300mm of required design mix cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement:3sand) including making joints with or without grooves thickness of joints, except at sharp curve shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer -in-charge including carriage of materials within all leads and lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing/ rolling to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 90mm to 45mm size by manual means complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5cum or more.

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge.

BALDEV SHARMA