Selection of Interior Contractor for Interior Work of Mega CFC

Amount

Civil Work

AAC Block Work Providing and laying autoclaved aerated (cellular) cement blocks masonry with more than 100 mm thick AAC blocks in cement mortar 1:4 (1 cement : 4 coarse sand ) including RCC stiffeners. The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work, racking of joints, scaffolding and curing,etc. completed as directed by Engineer-in-Charge.

Providing and applying 12 mm thick internal plaster in one coat in cement mortar 1:3 with white cementicious wall putty (Birla or equivalent) at all heights and locations for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete. on 100 mm & 150mm thick wall

GYPSUM Wall Plaster for DRY ARES Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

Granite Door/Window Jambs Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge. 18mm thk. Ruby red, jet black, Hasan green Granite for width upto 150 mm

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

REINFORCED CEMENT CONCRETE WORKS Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement

All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

FORMWORK Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Rebarring - Providing and supplying ETA, CE, ICC, COLA, IBMB approved and LEED certified injection adhesive for anchor fixing in dry conditions with - HILTI HIT-RE500V3 + HIT-V/HASE rods for sizes from M8-M30. Anchor should be approved for Cracked Concrete; Seismic ETA C1/C2.The system is approved for automatic cleaning with the help of Hollow drill bit.The system should be made of two components, first consisting of resin and hardener in a soft foil pack of 330/500ml in 3: 1 ratio & second inserting ETA approved C-Steel coldformed HIT-V /HASE rod with galvanization ≥ 5μ, as per EN ISO 4042 for sizes from M8-M30 in (Galvanized or Stainless Steel version) .The system should be fire rated. The chemical should be tested for non propagation of corrosion in anchor as per SGK test. The installation and the setting instructions should be strictly followed as per the manufacturers recommendations. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2 TR023/ HIT Rebar Method/ TR 069 or relevant tested and accepted rebar guidelines. There should be no clearance between Anchor and Base Plate hole diameter. This to be filled with material of sufficient Compressive strength or use Hilti Seismic Set. Also there should be no clearance between Existing Concrete Surface and Base Plate. This to be filled with material of sufficient Compressive strength Also, Scan the existing structure with Rebar Locator to locate existing R/f so as to avoid conflict with existing R/f while drilling Holes during post installed anchor.Scanning before drilling to be done with HILTI PS300 tool to avoid hitting existing rebars. ANCHOR SIZE as per details drawing upto 20 mm(175mm min. embedment depth).

FLOORING & CLADDING "Providing and laying Vitrified tiles in floor in different sizes and flooring in pattern and laid with spacers of size 3 mm as detailed in drawing (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system" 11.41A.1 Double charge vitrified tile polished finish of size

11.41A.1.1 Size of Tile 600 x 600 mm

11.41A.1.2 Size of Tile 800 x 800 mm

11.41A.1.3 Size of Tile 600 x 1200 mm

Vitrified tiles Matt/Antiskid finish of size

11.41A.3.1 Size of Tile 600 x 600 mm OR 300X600mm

11.41A.3.5 Size of Tile 1200 x 1200 mm

Same as above but decorative tiles basic rate 300/- per sqft

Vitrified tile skirting - Providing and fixing 75mm high skirting made out of same tiles as that of flooring fully homogeneous Vitrified tile to walls/columns with spacers of size 3 mm as detailed in drawing or as directed by the Engineer In charge. Tiles shall be fixed in 6mm thick bed of cement paste on a backing coat of cement mortar 1:3, not exceeding 12mm to correct line, level and plumb. Joints are well cleaned and grouted with matching colour of approved quality with Epoxy grouts (Laticrete, sika or equivalent approved), and cured, cleaned and including finishing junction of plaster, protecting etc. all complete at all heights, lifts and leads to the entire satisfaction of the Engineer In charge.

Artificial (Composit marble) Providing and fixing machine cut and mirrorpolished approved coloured Composit marble SLAB with inlays of approvedsize,20mm +2mm thk. Of approved quality for required patternon a bed of 1:4 CM 25mm average thickness including neat cement float,filling joints with neat coloured pigment,curing,polishing andcleaning etc.complete. Cladding Basic Price 3600/- Sqmt

"Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick"

"Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete"

Granite counter "TELEPHONE BLACK GRANITE WASH HAND BASIN COUNTER : Providing and making wash basin counter in single piece of 18 mm to 20 mm thk. Telephone Black granite 600 mm side fixed over 25 to 40 mm thk. Black Cuddappa, stand with type construction,by making zari, in walls upto 75 mm deep & fitting the wall surface by C.M. 1:2 with necessary moulding,profile cutting in granite and cudappa including making hole to receive pillar cock for wash basin etc complete and as per detailed drawing,as directed by the Engineer-In-Charge."

" Marble finish counter with storage undernate Providing & fixing of 20mm thick Marble counter 600mm to 700mm wide made out of 19mm thick cuddappa including top, base & vertical supports at 900 mm c/c distance, & the top to be cladded with Marble with facia & edges and also including Marble vertical side 1200 mm ht, dept and polished done on the visible surfaces as per counter as per details. Mention maling holes for the basins and any other services. Vertical supports to be installed as per the detail drawing of the storage cabinet underneath. Also to provide necessary cut outs for fixing of switches, sockets all complete. Rate to include 150mm Marble band above the counter as per details. "

MIRROR Providing & fixing of 6mm thick mirror with a backing of 12mm thick marine ply with necessary wooden support. Paneling to be formed out of 6mm thick float mirror of approved make, with edge polished and should be without any defects, waves / undulations, etc., shall be fixed on 12mm ply backing held as per details. Cove to be provided wherever light provision is shown in the drawing and 6 mm L anodize profile around the mirror to hold the mirror. includive of metal frame 25X25mm holo metal frame with metalic powder coating as per drawing

"Providing and laying 16-20 mm thick and 75mm wide strips of rough jet black Granite stone (or equivalent) of approved colour, on ramp to get anti-skid effect including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, machine cutting, dressing, leveling, jointing, filling the joints with neat cement slurry or with required pigment, curing, finishing etc. complete as directed by Engineer-incharge"

"Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge."

3.4mm thick Acoustic Vinyl (PVC) Rolls Providing & laying 3.4 mm thick approved Acoustic Vinyl Flooring as per EN 14041 (EN 651). The top surface must be treated with OVERCLEAN XL surface protection technique as per manufacturers specifications. The product Should have 0.67mm transparent compact wear layer to provide better performance. A non woven, fully impregnated, glass fleece layer functions as the backbone of the flooring. The Vinyl flooring mustl conform to all standards, including the new VOC emission classes and must be Phthalate Free. The welding / seaming shall be done using hot air welding gun. "Total Thickness as per EN 428(ISO 24346) : 3.4 mm Roll width as per EN 426(ISO 24341) : 2 m Wear Layer thickness as per EN 429(ISO 24340) : 0.67mm Roll Length as per EN 426(ISO 24341) : 25 m Abrasion Resistance EN-660-2(ISO 24338) : Group-T Commercial use as per EN 685(ISO 10874) : CLASS 34 Industrial use as per EN 685(ISO 10874) : Class 42 Stain Resistance as per EN 423(ISO 26987): Good Reaction to fire as per EN13501-1: Bfl-s1 Slip Resistance as per DIN51130: R9 Residual Indentation as per EN 433(ISO 24343-1) : 0.08mm Impact Sound Reduction as per EN ISO 717-2: 19 dB Method of Installation: Vinyl Flooring to be installed over existing Cementitious self leveling compound flooring. Inclusive of 2-3 mm thick Eurocol 975 self-levelling compound using Eurocol 044 Europrimer Multi. The product should be manufactured in GERMANY and must have EMIDOCE EC 1 R Plus, GISCODE ZP 1. CE marking according to DIN EN 13813: CT- C30-F6. The product should comply"

FULL HEIGHT 100 MM thick PARTITION WITH DOUBLE LAYER GYPSUM ON BOTH SIDES - 12.5mm Habito (outer) + 12.5mm Plain (inner) + 50mm framing (using 48 Gypserra Closed Stud @ 407mm c2c) + 12.5mm Plain (inner) + 12.5mm Habito (outer) (STC47) Partition from Finished flooring level till True Slab level Providing & fixing 100mm thick Gypwall partition consisting of GypSerra™ Closed Stud (“Patented in India (325062)”) Metal framework satisfying L/240 criterion at 200Pa, possessing fire rating of 60mins, tested in accordance to BS-476 Part 20 & 22 & sound insulation (Rw) of 50 Rw dB, tested in accordance to ISO 10140-2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-value of 0.51W/m²K & Severe duty rating as per BS 5234 part 2. Partition comprises of double layer, tapered edge Gypsum Board, certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. Partition includes inner layer of tapered edge 12.5mm thick Gypboard® Plain Board having flexural strength {Longitudinal > 650N & transverse > 220N} (3rd party EPD verified, ISI Mark certified, IGBC GreenPro certified, conforming to IS 2095 Part 1 : 2011/ EN520:2004) of size 1219x2438mm on either sides of the framework and outer layer of tapered edge 12.5mm Gyproc® Habito board (conforming to EN 520: 2004, A1:2009, Type A,D,R,I along with the transverse strength of 850 N and longitudinal strength of 1100 N ,Thermal Conductivity: 0.24 (w/mºK) Thermal resistance: 0.05 (m2K/w) and pull out strength of >600N, Specially designed to give flexibility of static loading without any ply or combustible material as a support or backing anywhere on the drywall to utilize space in a fast and functional way, should be able to take even unplanned static load upto 30Kg point load with regular number 10 wood screw at minimum spacing of 150 mm and board size 1220x2440mm), fixed to the framing on either side of the framework. Habito board will continue 150mm above false ceiling height and balance height to be covered by Gypboard Plain (boarding above Habito on either sides) (recommended up to true slab). GypSerra™ Metal frame work, designed in compliance with BS EN 14195 & manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa & tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397 & tested for 500hrs of salt spray test as per ASTM B117, includes 48x0.6mm GypSerra™ Closed Stud, cut 10mm in overall length for slab deflection provision and stud not screwed to metal at the top, is positioned at 407mm c/c in 50x0.5mm GypSerra™ Floor Channel & 50x0.5mm GypSerra™ Ceiling Channel. Floor & Ceiling Channel is anchored with Gyproc® Rawl plug Ø8x45mm having Pull Out strength of 6.8KN, fixed at 600mm c/c in Center. A 48x0.6mm GypSerra™ Closed stud, used as Noggin Channel, is placed between the studs, fitted at the horizontal joint of outer layer of board. A Gypboard® Plain Board strip is placed between Ceiling Channel and soffit when fire rating required is more than 30mins. Inner & Outer layer of Gyproc® Boards to be Screw fixed with Gyproc® Drywall Screws of 25mm with 12nos per m2 & Gyproc® Habito Drywall Screws of 35mm with 24nos per m2 at spacing of 300mm & 300mm respectively. 50mm Glasswool of density between (Recommended 48 kg/m3 density) 18-24kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges & joints to be finished with Gyproc® Easi-Fill JC & Gyproc® Paper tape. Gyproc® Levelline CT corner bead has to be applied at all corners for enhanced corner protection. Periphery & cut-outs of the partition to be treated with Hilti/Fischer FiAM/Pyroplex/equivalent intumescent fire & Acoustic Sealant. Loading on Habito to be done using 5mm No 10 woodscrew only {Point load = 30kg, min. distance = 150mm between 2 points, using manual / battery operated drill of low torque, around 10-N-m}. The partition to have additional supports required for general cut outs on surface level and above the false ceiling level for all services related and also to have support required of 12mm thk ply backing for TV location and associated works should be treated and closed after services work. The partition above ceiling to be closed after the completion of MEP services and associated works. All the holes or gaps around the services line (HVAC, Fire pipes, Electrical) to be closed with Smoke and Acoustic spray (Hilti CP 572) and sealant over thin gap and joints. (Hilti CP 506.) Vendor to complete wall mock-up with all detail for Design consultant review and approval. Data Sheet for sealant and all material shall be submitted for sign-off and record.

ABOVE CEILING PARTITION - Partition from false ceiling level till structural ceiling level Same as above but Single layer 10 mm thk Bison Board partition - frame work as mentioned above item

Glass partition (50x25) Supply & Installation of Full Height Glass Partitions systems of 50 x 25mm thick section on all four sides for the partitions using profiles as verticals at the solid partition junction & Horizontals at top & at bottom with snap on option for installating glass from FFL upto 3000mm. Rate include supply & Installation of 12 mm thk toughened glass with butt joint profile ( T, L , I ) bonded with double sided adhesive tapes for glass to glass butt joints. (frame colour to be as per design like anodized Silver / black etc).

Glass Partition System:- Supply & Fixing of 12mm thick toughend glass glazing fixed with Alround beading aluminium 40.02 as vertical & 40.05 and 40.06 as Top and bottom member in 40mm x 18mm as per maufacturers specification. Finish of the aluminium profile shall be anodized sandblasted satin silver finish. Glass to glass shall have "I" joint profile and Infra-sys Aluminum Mullion profile 2400 mm long 50 mm X 36 mm (silver anodized) mullion needs to be installed and the centre to centre distance of the mullion to be installed in long partitions (shop drawing to be provided for approval). Extra mullion support for long partitions to be provided wherever required. Product to be certified by Manufacturer's Representative. To Fix the Glass partition & glass door on the existing gyp partition, necessory wooden framing to be inclusive in the cost.

Supply of Frost / Privacy / Digital Film for Glass Partitions. Application height shall be at 600mm from the floor level up to 1200mm & length as per glass partition - as per approved sample by architect.

Digital UV Printing on 3M 8150 100% Ultra Clear Film using Latex Ink and Printing Technology to achieve maximum vibrancy. Cost Includes wastage, printing and installation at site.

Sliding folding partition

"Providing & installation of sliding folding partition of approved make and as per the drawing, Surface : finish Veneer / Fabric. The fabric installted should not sag or loosened at any location. (Ceiling Height Up to 3500)

Product : Palace 110s – Manual "Providing & installation of 'Operable wall consisting of 80/90/110 mm thick individually movable elements with sound insulation up to 50dB, suspended from a top track made of Material Aluminium Extrusion-6005A F27 T6 only. Each panel to have top and bottom operable EPDM pressure seals operated by a crank handle(manual)/Motor(Semi-Automatic) to ensure optimum contact pressure of 1500N.The panels shall be interconnected by means of a concave/convex(or tongue & groove) interlocking aluminium profile. The profile shall have an integrated EPDM magnetic strip and a vinyl acoustic seal. Each element must be constructed of a non-deflecting steel tube frame of Zinc coated Steel tube (Cold JIS STKM12) Aluminium Anodized profiles Extrusion-6063 T5, with edge protecting, bolted together. The frame must be cladded either side with 16mm MDF panels hung in acoustic (acoustic) isolation from the frame and allowed to vibrate independently/Retractable of the frame. The facia panels must also be easily removable. The panel must be filled with high density rock wool (45-48kg/m3) in accordance with the specified sound insulation requirements and Bitumen Sheet can be added if required to achieve the desired DB level by the manufacturer. The telescopic element must open and close 120 mm and must be operated by a single mechanism for both the top and bottom seals. The panel to be hang to the track using Galvanized Steel Cold JIS STKM12 free maintenance trolley with self lubricating Multiple Ball Bearings. The MS structural work above false ceiling to True slab capable of Supporting this partition should be including in the rate. Sonic barrier between true slab and tracks to be included in the rate. Installation of panel to be rate inclusive.

Aluminium Skirting "Aluminium Skirting : Supply and Fixing 75mm ( SKP002 ) High Aluminium Skirting in Black Anodised Matt shade, with 12mm thick ply backing of Bottom Line or equivalent make with Aluminium capping strip as per manufactures specification or as directed etc. complete. ( Versatile Ventures ) The skirting shall be fixed as per details & Architects instructions. Skirting shall have Ply backing with Screw type."

Aluminium Framework "Providing and fixing Aluminium Framework work for Wall Panelling and Boxing, Providing and fixing Aluminium Framework work placed at 610mm centre to centre vertically & 1200 mm centre to centre horizontally for Wall Panelling / Partition / Boxing, with standard aluminium tubular sections as per architectural drgs of approved make conforming to IS: 733 and IS: 1285, fixing with necessary screws / fastners of required dia and size. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, stainless steel screws, all complete as per architectural drawings and as directed by Engineer-in-charge. " Using 25mm x 50mm box sections

Glasswool / Rockwool Insulation - For Gypsum Partition Supply of 50mm thick glass wool of density 48kg/m3 wrapped in RP Tissues. The glass wool to be filled in the cavity between the framework and Gypsum skins. Rate to include gluing insulation to first board at multiple points and then bracing the insulation with the help of GI wires.

Providing and fixing Final Skin in 12 mm thk perforated ply finished on above frame work

PANELING

Fabricating and fixing of 12mm Ply on to the existing partition (+ 25 to 50mm projection to be consider with 50X25mm aluminium frame work ) and 4mm veneer shall be fixed and finished with approved Melamine polish. To have necessary grooves / Aluminium or anodized finished Profile ('C' profile or 'T" Profile as per requirment) as per details. To be in proper line and level as per details. (Basic Rate of Veneer shall be Rs. 1100/- per Sqmt)

Providing & fixing single layer 12mm thk paly with laminate finish on existing wall & partition inclusive all necessary hardware

Providing & Fixing in position of 12mm Ply on to the existing partition / wall and finished with 1mm thick laminate. Should consider upto 50mm Projection with 50mmX25mm Aluminium frame work, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. Including all materials labour,finishing etc complete

CHANNELLED WALL PANELLING OF SIZE: 192X2400X15 MM Providing and Fixing Channelled perforated panels of width 192 mm, thickness of 15 mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a―Helmholtz fluted perforation with consecutive 3 mm wide groove followed by 13 mm or 21 mm of visible pane (G-13 / G-21). The edges of the panel shall be tongue-and-grooved to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbingn on-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13.(Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1 mm / 1000 mm and bow less than 1 mm / 300 mm. The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge.

ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: 600X600/1200X25MM Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25 mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTME-84. The Acoustical Wall Panel shall be of sizes 600x600 mm(Nominal) or 600x1200 mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250Hz, 500Hz, 1000Hz and 2000Hz) with 50mm air gap as per ASTM C423 to be fixed to wall on a framework of Aluminum and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. Installation : An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer‘s recommendation. Install wooden batten grid (provided by others) of section 50x50 mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3nos. incase of 600x600 mm and 4nos. incase of 600x1200 mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained

Arc stick Customized moulded acoustic 3d Panels with different types of patterns (Senses Akustik or similar Make ) "Acoustic foam, Birch Ply, Finish with Felt or Fabric Material Dimensions: Standard Height 2700 MM, Width: A= 100 MM, B= 150 MM, C= 200 MM, Thickness: 35 MM ( +-10%) Customization Possible on request. (Pricing and details available upon request) Acoustic Performance ASTM C423-09a and ASTM 423-90 , 0.66 NRC Fire Test Felt - ASTM E84 Flammability: Class 1 or A Smoke Index: 65 PU Foam Filling CAL TB-117 - Testing the Smolder Resistance of Materials Used in Upholstered Furniture CAL117 Compliant. PU Foam BS 5852: Part 2: 1982 - Fire test of upholstered composites for seating Ignition Source 0 (Cigarette) Compliant. "

MDF Paneling

Providing and fixing panelling on existing partition / wall (Projection of panelling to be consider +25mm to 50 mm from the existing partition / wall using 50 X25 mm frame , including facia on the niches made out of aluminum framing 50mm x 25mm fixed on existing partition/wall with 12mm thick MDF fixed to the frame work and grooved & Niche pattern as indicated with Water Cut paint.finish and finished also 75mm high aluminium Skirting & including all hardware etc. complete. and rate to include the correction to be done to the existing surface to maintain the desired line of the panelling.

Reception Back drop "Customize Screen reception back drop- Combination of 12 mm thk MDF laser cut grill + SS Engraving plate as per approved design & MDF boxing around screen and MDF boxing will be 150X50 & 150X25 mm top, bottom & vertical as per design Details with Duco finish - mounting on Floor & provide required Ceiling Support with removable type in SS road support (Height consider upto 7.5 mt true ceiling) from top to take support from gypsum or true ceiling. "

Providing & fixing MDF paneling with CNC Router Cutting design grill on wall/partition ( (Projection of panelling to be consider +25mm to 50 mm from the existing partition / wall using 50 X25 mm frame) in 12mm thick mdf with flexi ply around side as required with finished in duco/water cut paint, as per given details

Laminated Box Panelling - Projected on the existing partition or wall "Fabricating and fixing of laminated Ply box work of depth 150mm (Projection of panelling to be consider +150mm from the existing partition or wall, including facia & the niches) as per details made out of aluminium framing 50mm x 25mm fixed on existing partition with 8mm thick Plywood boxing and finished with approved 1mm laminate including all hardware's etc.complete as per architects approval, contractors has to include cost of 75mm facia provision for indirect light as per the detail drawings. "

LACQUERED Glass panelling Fabricating and fixing of LACQUERED painted glass panelling in the meeting room. 8mm Ply shall be fixed on the existing partition. 8mm thick approved lacquered glass shall be fixed along with Aluminium or anodized finished Profile all around the glass Edges ('C' profile or 'T" Profile as per requirment) as per details to the base layer with suitable 3M double side tape as per detail and including all hardware's etc., complete as per architects approval. (Glass shade as approved by the Architect). - thia will use from 1800 mm height and above

green wall/ bio wall Supply and Installation of vertical green wall/ bio wall with all necessary modules,fabrication,media,plantation and advanced automated irrigation system with timer based controller and related accessories. Including internal plumbing work. Supply and drainage point shall be provided by other vendor.

providing and fixing planter screen made out of 12 mm dia MS Hollowo piping with powder coated planter scree with Provide support for frame additional framing above false level to till true ceiling and bottom as per design details

Providing & fixing of Moss nature’s wonder plant Ready To Fix on Ply/Wall Base walls, panels and art. Thickness 23 to 70 mm Including 6mm Ply Backing, to be Fixed as per Required Shapes & Drawing Details with Wooden fins paneling on existing wall/partition with necessary manufacturing fixing details

Acoustic CHROMA / PRISM paneling SUPPLY & Fixning OF 4 mm thk Ply backing on existing partition/wall AND CONTINUUM make 12mm CNC GROOVED SCREENS CHROMA / PRISM SERIES ACOUSTIC PANELS for reducing and controlling Reverberated noise with a NRC of 0.5, Panel Composition 100% PET to be minimum 50% Recycled PET with LOW VOC which addresses life cycle impacts such as Toxicity. Size of Panel 1220 x 2440 with thickness of 12mm , weight 2300 gsm, Density 195 kg/m3. Acoustic NRC 0.40 for Direct Fixing on Wall, 0.50 with a 14 mm AirGap, 0.6 with a 24 mm Air Gap. To be used for Wall Panelling, Wall Screens and Ceiling Panels.

DOORS

"Providing and fixing fire doors with 2 hour fire rating conforming to IS: 3614 (Part 2), BS 476 (Parts 20 & 22), ISO 834 ; 45 mm thick fully flush, double skin door shell with lock seam joints at stile edges made from 1.25 mm thick galvanized steel sheet including door frames made from 1.6 mm thick galvanized steel sheet formed to double rebate profile of size 143 mm x 57mm as per manufacturer's instructions, door frames and shutter primed with Zinc Phosphate stoving Primer and finished with Polyurethane Aliphatic grade or epoxy paint including ironmongery consisting of stainless steel ball bearing butt hinges 3 mm thick fixed flush to the frame and shutter, full width horizontal handles (panic bar), concealed flush bolts, door closers, other standards fixtures and fasteners, etc. complete for the following clear opening sizes:" "Item to include all necessary fixtures and fastenings [ fire rated ] including heavy duty SS hinges min 4 per shutter, tower bolts, door stoppers, handles, mortise lock, push plates, kick plates, door closers, etc. Complete."

flush door Providing & fixing in position single leaf flush door of required sizefor internal doors of residential units, shutters madeof 45mm thick marine grade block board core with 25mm x 45mm T.W. lipping patti, 1mm thick approved decorative laminates finish on both faces of shutter, including providing & fixing T.W. frame of 60mm x 150mm size, coating all the exposed surfaces of wood with 2 coats of flat enamel paint of approved shade & make over one coat of approved synthetic primer, coating all the surfaces of wood in contact withmasonary with Tar (Black Japan), preparing the surfaces, providing and fixing brass chrome finished or S.S. fittings and fastenings etc complete as per detailed drawing no. WD-26 & as directed by theEngineer in charge. D5,D7,D12,D8,D9,GLD5

Fire rated Double leaf Door - Laminate Finish: Providing & Fixing of wooden Fire door with Panic Bar of approved make and of required size, 120 minutes fire rating, integrity and insulation in accordance with the criteria of BS 476: Part22: 1987 and Report 212(1)/FR/2003; insulation on door leaf only. Tested at Fire Research Laboratory, Central Building Research Institute, Roorkee with standard heating conditions as specified inIS: 3809-1979 and BS: 476 part 20 & 22, 1987 to achieve the required integrity & insulation (i.e. to restrict the heat radiation, temparature rise on the non fire side to the maximum of 140 degree Centigrade above the ambient temperature on the unexposed surface of the shutter). Red Mirranti Hard wood frame of section 145mm x 70mm with Intumescent strip (Imported) to take care of Hot and cold smoke of size 10mm x 2mm x 2Nos. concealed in the grove of the frame and 55mm thick double leaf shutter made out of perimeter railing of Red Mirranti wood of size 100mm x 29mm and Promina 60.9mm thick. Calcium Silicate Board Fire Retardant compound on each side coated with Intumescent sealant and faced with 4mm thick marine ply

Same as above but both side veneer finish door

"Providing and fixing superior quality factory made phenol bonded solid core double leaf flush commercial door shutter of thickness as mentioned below and of approved make conforming to IS: 2202 (Part I, II) with 12mm thk. teak wood lipping all around, 3mm thk. commercial veneer with three coats of french polish on external face and 150mm x 60 mm or 125 mm x 75 mm C.P. teak wood frame with glazed fanlight fanlight with 4mm thk. glass including bright finished or black enameled mild steel butt hinges, approved fixtures, fastening, hooks, eyes, screws and painting the frame and interior side with one coat of primer, putty and two coats of synthetic enamel paint of approved make and colour etc. complete as directed by Engineer in charge." 40mm thick shutter

Same as above but one side laminate & one side veneer finish

Providing & Fixing in position Acoustical Doors along with 150x150 mm teak wood frame, doors made from 50mm Teak wood frame 600x600 c to c filled with 1000 Gsm synthetic wool 50 mm thick and 3 mm Tecsound from both sides, 12 mm waterproof ply & veneer from both sides, including 150 mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door- closer (Dorma /Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete

Supply & Installation of infra-sys make Wideline Door Frame 103 X 33 Section with addition Rebate profile Running on all 3 side of the door with provision to inset glass from partion on verticle edge of door frame with opening for door of 2400mm ht. Stile Door Shutter of 95 x 44 section to acomadate 10mm/12mm glass in between, having provision for door closer (concealed door closer/ Surface mount door closer) and Lock (Mortise lock with lever handle / Dead lock with Offset pull handle) of Hafele/ Geze/ Dorma make with option of having , 4 nos for SS 304 grade Butt hinges & concealed type Drop down seal of Infra-sys make. Door frame & stile shutter (frame colour to be as per design like anodized Silver / black etc). Size 1000 x 2400mmht as per Shop drawing.

Same as above but Size 1200X2400 mm

Same as above but Size 1800X2400 mm

Strong room Door 1200X2400mm Strong Door Class I Consists of a composite slab of thickness 18mm made of a special layer of flame and arch resistant alloy that protects against fire, power drilling, oxy acetylene torch and arc cutting. It is further fortified with a composite 62mm layer of godrej double duty barrier (DDB) Superior quality 10mm thick MS plate in a one piece bent angle door frame A Unique two step door construction Godrej Double duty barrier material provides reliable protection against fire 12 shooting bolts, each of 38mm diameter area provided in front and rear to secure the door balanced pressure bolt to protect against dislodging attempts to hammer it in Locks and re-locking device on primary lock for extra protection Grill gate is secured with high-precision 8-lever lock and opens on both sides Fitted with two dual control high-precision 8 lever locks from godrej A relay mocro switch is provided inside to control the lighting inside the vault room tested as per BIS Standard IS 11188:2014

Providing and fixing fire doors with 2 hour fire rating conforming to IS: 3614 (Part 2), BS 476 (Parts 20 & 22), ISO 834 ; 45 mm thick fully flush, double skin door shell with lock seam joints at stile edges made from 1.25 mm thick galvanized steel sheet including door frames made from 1.6 mm thick galvanized steel sheet formed to double rebate profile of size 143 mm x 57mm as per manufacturer's instructions, door frames and shutter primed with Zinc Phosphate stoving Primer and finished with Polyurethane Aliphatic grade or epoxy paint including ironmongery consisting of stainless steel ball bearing butt hinges 3 mm thick fixed flush to the frame and shutter, full width horizontal handles (panic bar), concealed flush bolts, door closers, other standards fixtures and fasteners, etc. complete for the following clear opening sizes:

WALL FINISHES

ACRYLIC EMULSION PAINT FOR WALLS/PARTITION "Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade 13.60.1 Two or more coats on new work"

TEXTURED PAINT Providing and applying paint of approved shade & colur of oikos or equivalent on internal wall surfaces wherever required at all heights to give an even and uniform shade, applied over 2 coats of primer and putty of approved make as per manufacturer specification fully to give a smooth and even surface including thoroughly brushing the surface free from water / mortar dropping and other foreign matter and sand papered smooth, complete per manufacturers specifications and as directed. (Basic Rate of Paint shall be Rs. 1250/- per Sqmt).

same as above texture paint - Nova Mix PLANOCOLOR®MICROCEMENT TEXTURES AND FINISHES FOR WALLS AND CEILINGS - Decorative coatings that can be applied on floors, walls, or furniture. coatings are EC 1 PLUS certified Bsic cost 2370/- Per sqmt

Pelmet - Size 150mm x 450mm ht Providing and fixing of pelmet made of 19mm commercial Ply finished with laminate of approved shade as per details and Architect's instructions. Pelmet to the fixed to the true ceiling/closest structural support with salwood supports as per directions. Rate to include necessary cut-outs to accommodate AC grills, Electrical cut-outs as per details. To have necessary grooves and to be fixed with necessary sealant as per architects instructions. Pelmet to accommodate blinds as per details. Neat joint to be achieved between the Gyp ceiling and the Pelmet.

same as above but only vertical facia upto 1mt in 12mm thk ply with black laminate finish for glazing side with necessary frame work from slab level till ceiling level

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38 mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Exposed slab paint Providing and applying blackout paint (Matt Finish) 2 coats - Syncoat Synthetic Enamel for the services area on the existing ceiling in the Cafeteria; having quality of quick drying, gloss / matt, durability & covering. The paint to be used for various types of surfaces like wood, metals, etc. All surfaces to be painted should be thoroughly cleaned and free from grease, loose flake coating, etc. The surface should be prime with appropriate primer like syncoat redoxide primer or zinc chrome primer. Rate to include cost for supplying and erecting scaffolding

Wall Covering "Providing and fixing vinyl backing commercial grade leatherette wall paper of approved shade with recommended adhesive of approved make which have 100% washable, scratch resistance, peel proof, and fire retardant properties. Cost to include preparation on the punned surface for receiving the wall paper as per the manufacturer specification. Width: 130 cm Length: 30 m Construction Type: Fabric backed Vinyl Backer: Cotton Scrim Weight: 390gsm Type I (15oz) Fire rating: Euro Class B-s2,d0 Other Fire Certifications - include Russian GOST, Australian AS 5637.1, Chinese 8624 Material need with Low VOC Certificate Mode of measrement ;installed area"

Vinyl wall Covering Wescom Wall Paper or Equivalent "Cotton backed vinyl wallcovering, robust length texture, water-based ink printed vinyl coating, cotton backing Width ± 130 cm, ± 51 inches, FR treated, flame retardancy EN 13501, B s2 d0 ASTM E84, A NFPA 286, with total mass of 350 - 800 g/m2"" 2. "

Acoustic wall paper "Width : En 145cm Length : Customise size Uzunluk: Lstenilen Ebatta Weight / Agirlik 300Grm/m2 Thixkness/kalinlik 2.2mm surface / yuzey : Trevira, extile back side / Arka Yuzey: Non-Woven Falme / Alev Almazlik B-s1, d0 DIN En 13501-1 Customise design Kisiye Ozel Tasarim Acoustic absorpation value - a:0.85 Acoustic absorpation class : B"

Graphics Supply & Installation of 3M Envision Wrap Non-PVC Wall Décor Lite where in Envision 48C-20 will be used as a base material for printing ( latex ) and 8050M will be used as a Over laminate to protect the print from fading, which will come in a matte finish with approved artwork digitally reproduced with water-based inks certified to have no hazardous air pollutants. Self-adhesive, bubble-free installation to be done on a smooth, dust free putty surface that has a coat of oil-based primer, by Authorized Installers only. Certificate of image license and 3M Interior Warranty for a period of 3 Years to be submitted along with invoice. Material need with Low VOC Certificate

CEILING

Plain Gypboard ceiling "Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :" "12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks"

MetaL Baffle ceiling METAL BAFFLE CEILING : Providing & fixing of horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of Aluminum Extrusionin Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600 mm in powder coated to Woodgrain / Plain finish (Red Oak, Cherry, Black & White).. The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B 117, QUV– A Test for 1000 hours as per ASTMG- 154– (Cycle–1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation with in a manufacturing batch shall be delta E<1 using Excite / BYK Gardner instrument and gloss level 25±5 at 60˚ as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20x30x3700 mm(Thk-1.5 mm) having slots in module of 25 mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with Endcaps.. SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating thickness of 60-80micron. The U–profile to comprise of alternate square & rectangular slots of 6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plug in clip to secure the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U–profile is 20(W)x30(H)x3750(L) mm and is rolled form from 1.5 mm thick mild steel with a powder coating thickness of 60-80 micron.U-Profile to be connected to each other using U–Profile Splice. The U-profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger. The Baffle along with suspension system used together shall carry a 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The supply shall be backed by a Manufacturing Test Certificate. INSTALLATION: Installation of U-Grid: The U profile to be suspended at every 1200 mm center to center using 6 mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.7 M. 1st U-Grid Channel must be no more than 400 mm from the perimeter. Installation of Baffles: Locate the slot for Baffle Hangers in U Profile section at 1200 mm centers. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile.End Caps to be located by pushing the End Cap tongues into open Baffle slots.Installation should be carried out as per Manufacturer recommended procedure.

Providing & fixing Armstrong tubular Baffle Ceiling made out of GI The baffle blade shall be in size of 70mm diax3600mm in powder coated to Woodgrain /white finish – Red Oak/Cherry/approved shade CC-150mm. The baffle blade shall be suspended using Slotted U-profile of 20 x 30mm at on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter. Installation of Armstrong Baffles: Locate the slot for Baffle Hangers in U Profile section at 1200mm centres. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip. When doing continuous installation, Baffles blades are to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into open Baffle slots. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.

Metal Triangular Open cell Providing and fixing in true horizontal level Armstrong 200mm Cell size Triangular Cellio Open cell GI lay-in ceiling tiles with border panels forming flush-tegular edge of size 600x600x38mm having Fire Performance CLASS A1 as per EN-13964. The tile shall be powder coated to White color having powder coat thickness ranging from 60-80 microns.The tile with cell size of 200x200mm shall be laid on Armstrong Suprafine 38 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 12.5 Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make.INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum.

Mineral Fibre 600x600x15mm ML tile grid ceiling Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15 mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k=0.052-0.057w/mK, Colour White, Fire Performance UK Class 0/ Class 1 ( BS476pt-6&7) in module size of 600x600x20mm, suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I. channel on XL 2 Clip having a web height of 32 mm with 15 mm wideT-section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kilograms / M2 and minimum pull out strength of 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.

METAL OPEN CELL CEILING : Providing & fixing horizontal level Open cell Aluminiumlay -in ceiling tiles with border panels forming board edge of size 600 x 600 x 38 mm (Nominal) having cell size of 100x100 mm made of AA-3003-H14 (Tempered) grade Aluminium suitable for architectural finishes in 0.35 mm thickness as per in IS:2676 (1981) in Global white color. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 hours as per ASTM B117, QUV–A Test for 1000 hours as per ASTMG-154–(Cycle–1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1using Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTMD 523. Tile shall have a Fire Performance class A as per GB 8624-2012. SUSPENSION: The tile shall be laid on 15 mm wide T-section flanges colour global white (matching to tile colour) having double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38 mm (allsections). The deflection loading of the system shall be 12.5kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTMC 635 (Deflection limit less than L/360) with a deflection loading of 15 kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between―"cross tee to cross tee" and―"cross tee to main beam" All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than100kg. The T Sections shall be made of hot dipped galvanized steel 90 gsm and pre-painted steel with baked polyester paint of 0T bending capability. The Tile & Grid system used together shall carrya 10 year warranty against manufacturing defect and manufacturer shall provide a warranty certificate. The Tile & Grid shall have the manufacturers name embossed/printed on it. The supply shall be backed by a Manufacturing Test Certificate. INSTALLATION: To comprise main runner spaced at 1200 mm securely fixed to the structural soffit using suspension system (specifications below) at 1200 mm maximum. The First / Last suspension system attheend of each main runner shall not be greater than 450 mm from the adjacent wall along with the first and the last main beam shall be at less than 600 mm from the wall. Flush fitting 1200 mm long cross tees to be inter locked between main runners at 600 mm to form 1200x600 mm module. Cut cross tees longer than 600 mm require independent support. 600x600 mm module to be formed by fitting 600 mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19 mm, secured to walls using screws at 450 mm centre to centre maximum. All border cut tiles shall be laid, using lay-in end cap for installation to have a Microlook effect on perimeters. Installation shall be carried out as per Manufacturer recommended procedure. SUSPENSION SYSTEM accessories manufactured and supplied by Manufacturer consisting of M 6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia–2.5 mm of 1.80 m length having a tensile strength of 344-413 MP a and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips made of 0.7 mm thick Grade 1 C 55 galvanized spring steel of dimension 100x20 mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners.

GI Lay in Plain metal ceiling Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600 mm Lay in tiles of precoated galvanized steel in 0.5mm thickness in Global white color tile to be laid on grid systems with 15 mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees. Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600 mm Lay in tiles of precoated galvanized steel in 0.5 mm thickness in Global white color tile to be laidongrid systems with 15 mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.

Wooden ceiling Veneer finish Providing and fixing wooden ceiling with framework in 50mm X 25mm approved Aluminium section @ 600mm c/c both ways suspended from RCC slab. 12mm Ply shall be fixed to the frame work and 4mm veneer fixed to the base layer and finished with melamine polish as per drawings. Top of the panel to be treated with anti-termite treatment and finished with 1 coat of approved colour paint. Rate to be inclusive of all kinds of profiles and cut outs required for light fixtures, Speakers, Smoke detector, trap doors and AC grill in the ceiling. Wooden framework as per requirement & 150mm depth with cove provision to be consider. Plan area to be considered for measurement, verticals will not be paid separately.

Same as above specification but 10 mm thk perforated MDF feture ceiling, MDF fix on ply with water cut paint finish, conical shape or as per drawing details

Same as above but Curve shape with using flexible ply and veneer finish ceiling as per detail drawing

LAMINATED Wooden ceiling Same as above veneer ceiling frame work and ply work but finish in laminate ceiling

GI METAL MICROLOOK LAY-IN RANDOM PERFORATED TILES WITH KNAUF SILHOUETTE 38 "GUIDE SPECIFICATION FOR KNAUF CEILING SOLUTIONS 600 X 600 MM GI METAL MICROLOOK LAY-IN RANDOM PERFORATED TILES WITH KNAUF SILHOUETTE 38 WITH 15 MM EXPOSED GRID SYSTEM Providing & Fixing horizontal level suspended ceiling comprising of Knauf GI Microlook Lay-in Random Perforated metal ceiling consisting of 600x600mm (Nominal Size) Lay-in tiles of 120 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5 mm thickness as per IS:513 (1994) in Global white color with Square Tegular/Microlook 90˚ edge having 8mm drop and 5.5mm flange. Tile shall have perforation having hole diameter 2.5mm and open area 16% with linear and diagonal pitch of 5.5mm and 7.7mm respectively and a border of 10mm. The difference between the 2 diagonal dimensions of the tile to be less than 1mm. Tiles shall be flattened by precision leveller to minimize sag to less than 1/400mm. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523. The tile shall have a Light Reflectance of ≥ 63% in accordance with ASTM 1477-98. Back side of the tile will have Soundtex fleece hot pressed mechanically for uniform bonding to achieve NRC up to 0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C-423 and Fire Performance of Class 0/1 as per BS 476 Part 6 & 7 in module size of 600x600mm. All border cut tiles shall be laid, using Knauf lay-in end cap for installation to have a Microlook effect on perimeters. SUSPENSION: The tile shall be laid on Knauf Silhouette 38 profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with mitred ends & “bird’s mouth” notches to provide mitred cruciform junctions colour global white (matching to tile color). Grid shall have double stroke rotary stitching on all T sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 7.9 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 9.5 kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-painted steel with baked polyester paint of 0T bending capability. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Knauf suspension system (specifications below) at 1200mm maximum. The First/Last Knauf suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Knauf wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per Knauf recommended procedure. KNAUF SUSPENSION SYSTEM accessories manufactured and supplied by Knauf consisting of M6 Anchor Fasteners with hanger hole, pre–Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. Additionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners."

Mesh 600x600 "GUIDE SPECIFICATION FOR KNAUF CEILING SOLUTIONS 600 x 600 MM GI MESH LAY-IN TILES HAVING RHOMBIC PATTERN WITH KNAUF PRELUDE 24 MM EXPOSED GRID SYSTEM Providing & Fixing horizontal level suspended ceiling comprising of Knauf GI Mesh Lay-in metal ceiling system consisting of 600x600mm (Nominal size) Lay-in tiles of 90 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 1.5mm thickness having Rhombus shape mesh in Global white color. Tile shall have Short way of opening (SWO) as 12.6mm and Long way of opening (LWO) as 30.5mm with an open area of 84.0% for Lattice Flat or Rhombic design (Termed as Rhombic #7). The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level of 25±5 at 60˚ as per ASTM D523. Properties of Tile Relevant Standards Base Material 90 gsm galvanized steel in 1.5 mm thick IS 277 (2003) Galvanization Panel Dimensions 600 x 600 mm (Nominal)/ 595 x 595 mm (Actual) Thickness 1.5 mm Mesh Details Short way of opening (SWO) as 12.6mm and Long way of opening (LWO) as 30.5mm with an open area of 84.0% for Lattice Flat or Rhombic design (Termed as Rhombic #7) Panel Finish Electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. Salt Spray Tested for 750 Hrs/ QUV –A Test for 1000hours/ Humidity test for 1000hours. Adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5 at 60˚ ASTM B117 (Salt Spray Test) / ASTM G-154 – (Cycle – 1) (QUV-A Test) / DIN 50017 (Humidity Test) EN ISO 2409 (Adhesion) ASTM D523 (Gloss) Dimensional tolerances ± 2mm SUSPENSION: The tile shall be laid on Knauf Prelude 38 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 15 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 18kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. Suspension System Details Base Material Hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability Construction Method Roll formed double stroked rotary stitched construction to mechanically lock together the two metal layers of the vertical web INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Knauf suspension system (specifications above) at 1200mm maximum. The First/Last Knauf suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Knauf wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per Knauf recommended procedure. KNAUF SUSPENSION SYSTEM accessories supplied by Knauf consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners)."

Guide Specification for Knauf Ceiling Solutions 50mm Classic Axiom Perimeter Trim with 19mm face for perimeter solution of Knauf acoustical ceiling Providing & Fixing of Knauf Classic Axiom Perimeter Trim with 19mm face for perimeter solution of Knauf acoustical ceiling using appropriate Knauf Accessories ` Classic Axiom (AX2STR42I/ AX2CUR42Ixx) to offer perimeter solution with Armstorng acoustical ceiling system. Classic Axiom (AX2STR42I/ AX2CUR42Ixx) is made of extruded aluminum of O/L dimension of 19.3 x 50 x 3000mm. The C- Shape section provides 2 flanges of 19mm each for resting of tiles. Classsic Axiom must be powder coated in Global White. Profile to have engineered design boss for fitment of Tee bar connector, Splice plate Corner connector & hanger clips. Classic Axiom (AX2CUR42Ixx) can be curvered to a minumum radius of 600mm Axiom Splice Plate (AX4SPLICEI/AXSPLICEI): Formed to fit into special boss in the Axiom and locked in place with factory-installed screws. These Steel splice plates (AX4SPLICEI) are used to align and secure all joints between sections of Axiom trims. Corners are to be formed by mitering the end of axiom and splice plate (AXSPLICE) to be bent at right angle for connecting the end pieces. Axiom Tee-Bar Connection Clip (AXTBCI): Commercial quality G.I formed to fit into special boss of trim and locked in place by factory-installed screws and attached to Knauf (XL-24 / XL-15/Silhouette) suspension system members. T-Bar connection clips are used to attach the Axiom to the supporting Suspension system members. One clip is required at each location where the grid system intersects the Axiom trim. Hanging Grid clips (AXHGCI): Axioms to be hung independently to the structural soffit by engaging the Hanging Grid Clip into the boss of the Axiom trim channel and securing it to structural soffit Knauf Suspension (details mentioned below). INSTALLATION: Hang the sections of Axiom Trim onto the grid system by engaging the top ear of the connection clip under the boss of the channel trim. Slide the lower leg downward to engage the lower boss on the trim and secure by tightening the locking screw. Complete the installation of all channel trims sections. Install and secure the splice plates, corner pieces, and alignment plate’s etc. Adjust as necessary to properly align the complete installation.

MDF Ceiling Providing and fixing 12mm thick MDF board in ceiling with necessary supports all details as per the detail drawing. MDF board should be fixed upto the true ceiling. Rate inclusive of all necessary frame works and cutting, fixing, wastages etc,. Complete. and with all necessary hardware and removable panel provision needs to be done for maintenance.; complete as per the detail drawing and instructions by the Architect.

X- Rail Wipro Make ceiling "WIPRO X RAIL -LM 66R Series - Linear PROFILE Extruded Aluminum Modular sleek design duly powder coated in White/Black Configurable to various sizes based on layout, Integrated system for lighting as well as other devices. Rail to accommodate Linear Light , downlighter, cylindrical light, Track Light & other services like Camera etc.. Adjustable mounting suspension with SS wire -Flexibility in height adjustment (min 300 to 1500 mm). Standard joints available as ""L"", ""T"" & ""+"", Provided End to End connecting plate with screw set along with X-Rail. Designed and manufactured to comply with IS 10322 part5/Sec 1 2012 "

Cloud Celing "Ecophon Solo™ in 40 mm thickness, in various sizes and shapes. Panels are demountable,Panel is manufactured from high density glass wool with Akutex FT surface on both the sides. Edges are straight cut & painted. Manufacturing- Manufactured in Sweden, production unit is ISO 14001 certified. Acoustics-Sound absorption(Sabine) - Alpha w 1.0 Acoustics-Sound absorption Class - Class A as per ASTM C 423, NRC 0.9 Humidity Resistance -Permanent ambient RH upto 95% at 30 * C without sagging , warping or delaminating (EN 13964). Non Combustible-Tested and classified as non combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501 -1 -European Standard. Fire resistance -Systems are classified as fire protective covering according to NT FIRE 003 Light Reflectance - 85% light reflectance Indoor Health & Well-being -Complying with the French regulation on VOC emissions, A+ level.Certified by the Finnish Building Information Group (RTS) with the M1 label.Free from Substances of Very High Concern (SVHC) above 100 ppm as defined by the European REACH regulation (No1907/2006). Product Certified under GRIHA Council of India for Green ratings. Environmental Product declaration (EPD) acc to international ISO 14025 & EN 15804 series of standards. Circularity - Re-cycled content of more than 70% CE marking - CE-marked according to the harmonised standard EN 13964:2014 Maintenance - Daily dusting & vacuum cleaning, weekly wet cleaning Construction technique -Square Tech & Circle Tech 1. Draw the Solo Square support on floor and transfer marking on ceiling using Laser line marker. 2. Mark the position of One-Point-fixing, which is faster to install using minimum suspensions from soffit, on the true slab on the centre of the panel. 3. Fasten One Point fixing and use suspendors (2 nos.) wire hangers to be passed through One-Point-fixing on opposite directions. 4. Make sure all Wires to have same diemsion on all 4 sides. 5. Mark support as per size and shape of the panel, and fix the Saint-Gobain absorber anchor 6. Hang the Solo panel to the wires and adjust for height or level differences

Square 1200 x 1200 mm

Rectangle - 1000x1800 mm

Rectangle - 900x1200 mm

Rectangle - 900x1040 mm

Rectangle - 1500x1040 mm

Supply & Fixing of Acoustic Fabric Ceiling (Opaque starch fabric)basic rate 5500/- per sqmt "Providing & fixing ACOUSTIC coverings (ceiling & wall) made out of polyester knitted fabric coated with Polyurethane (PU). The ACOUSTIC fabric width of 2m, 3m, 4m &5.1m with weight of 230-330gm/m2, +/- 10% and thickness of 0.4 mm.The appearance of ACOUSTIC fabric should be matt, smooth and uniform with blanqcolor and light Fastness > 8. The tear strength of fabric should be accordance to CH: 5.5daN; TR: 7.5 daN. The fire rating should be accordance to B-S1, do. The fabric should be humidity resistant and free of carcinogenic substances (CMR) or volatile organic Compounds (VOC’s). At labeling in accordance with the French decree no. 2011-321,OcKo-Ter standard100 certified. The fabric should be paintable/printable with approved manufacturer guidelines with 10-year manufacturer guarantee. GI Metal Hollo sections molded as per Design requirement with Powder coted finished framework support to be made Acoustic Fabric Ceiling inclusive of Required Support Works from Truss Bottom/MS Support works inclusive of 48 Density 1000GSM Insulation fixed with Chicken Mesh above Fabric. The installation of ACOUSTIC fabric should be dry installation& done at room temperature using PVC, ABS tension profiles P-CC/P-CW/P-C10QS/P-C11QS/P-CCB022/P-B1/P- CC1P and backing with Insulating Felt LA 54of 50mm on plywood19mm the distance between stretch fabric and plywood is 50 mm, (100% synthetic(mineral fiber), weight 350gr/m2, +/- 5%, color white, thickness 50 mm, fire rating confirms to EN1350-1-1 : B-s1, d0, DIN 4102: B1,Thermal rating WLG : 035, Oeko-Tex certified , Acoustic performance : αs= 1.0- Classification D.he rate to include the wastage of fabric per the design. Rate to include cost for supplying and erecting scaffolding

TRANSLUCENT STRETCH FABRIC CEILING- Ht will 200 mm Basic rate 6200/- Sqmt "Supply and Installation of translucent stretch fabric Sheets - Translucent printed - including Rails, as per the detail drawings and manufacturers specification. Translucent stretch fabric sheets have a width of 2 mtrs. Any size larger than it shall have seam (joint). The periphery on which the profiles shall be fixed should be strong and sturdy so that the sides do not warp while stretching the sheets. The light box should be sealed in a way it should be dust free. Contractor to ensure all services viz lights, painting including other interior finishing works should have been completed before its installation. Rate to include cost for supplying and erecting scaffolding Thik- 0.15mm to 0.2mm ( Suede 0.35mm ) Light translucent properties : with ceiling/wall with back Lighting >70% Humidity , Rate shall including LED light with installation. "

same as above translucent stretch fabric but without printing basic rate - 3500/- per sqmt

Design,Fabrication & Installation of 4 mm thick exterior grade PVDF coated aluminium composite panels of ALUCOBOND having 0.5 mm thick aluminium PVDF coated sheet available in standard colours + 3 mm core material + 0.5 mm aluminium sheet chemically treated ( back sheet ) bent as per requirement, fitted on anodised aluminium necessary coated rectangular grid work, hardware, fixtures,brackets, anchor, fasteners of S.S. 304 grade etc. complete duly sealed with weathering silicon manufactured by DOW corning / G.E. silicon for circular columns and curved beams etc complete. All section for supporting ACP shall be of size 50 x 50 x 2.5 mm at a distance of 1.2 m Horizontally & Vertically or as per requirement of the design shop drawing has to be submitted by the contractor for the approval of structural Engineer. a) For Terrace b) For Entrance Canopy REBATE FOR SIZES Size :39"-Bruhan mumbai Mahanagarpalika shri Harilal bhagwati sarvsadharan Rugnalay (For 11" = 505.94*11"/25" = Rs. 222.17 per Inch. Size :46"-MCGM SHRI HARILAL BHAGWATI GENERAL HOSPITAL (For 4" = 505.94*4"/25" = Rs. 80.95 per Inch

Armstrong MDF wooden perforateed ceiling (0.8NRC) "Providing & Fixing of Armstrong Wooden finished Suspended Ceiling System with WoodWorks Microlook edge tiles with Armstrong 15mm Silhouette 45 exposed grid. The Tile in RG3003 (RG3) perforations having hole diameter as 3mm and open area as 3% with approved laminate (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) finish with 0.7mm matching PVC edge banding. Back side of the tile will have 50mm thk POLYMAX acoustical panel of 0.9 NRC on fix true ceiling, Humidity Resistance (RH) of 70% in module size of 600mm x 600mm x 18mm and density of 725 Kgs/M3. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 43mm and a load carrying capacity of minimum 15.6 Kgs/M2 (as per standard installation layout mentioned below) & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers. ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum pull strength of 110 kgs. (Adjustable hook clips of 0.7mm thick, galvanized spring steel can also be used for installation purpose as an additional accessory. The adjustable clip also consists of a 4 mm aquiline wire to be used with the main runner).

accoustical gypsum board perforated ceiling Rigitone Activ' Air 8-15-20 ( make Gyproc) Location Cafeteria / Breakout / Collaborative "M/F Suspended Rigitone Activ’Air 8-15-20 super Ceiling includes 20x28x30x0.5mm Gypserra™ Perimeter Channel {Material- GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM (IS277)} is fixed along the perimeter of existing wall with the help of HILTI HPS - 1 (6x40) impact anchor at 600mm centres. 25x10x0.5mm Gypserra™ Ceiling Angle {Material- GI(IS513),YS-260Mpa, Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the 27x37x25x1.6mm Gyproc® soffit cleat {GI(IS513)YS-260Mpa, Finish-Galvanised 120GSM (IS277)}. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1000mm x 900mm grid. 15x45x15x0.9mm Gypserra™ Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) fixed to the ceiling angle at every 1000mm c/c} and Gypserra™Ceiling Angle is fixed at every 900mm along the length of Intermediate channel with M6 x 12mm Hex Bolt & Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.}. 80x26x0.5mm Gypserra™Ceiling Section {Material-GI (IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra™ Intermediate Channel {Material-GI(IS513),YS-260Mpa, Finish-Galvanised 150GSM (IS277)} with the help of Gyproc® Connecting Clip {Material -High carbon spring steel wire(BS970Gr.En42),46-48HRC,Finish-Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 327mm c/c. Boarding shall start from the center of ceiling area. Single layer 12.5mm Gyproc Rigitone Activ’Air 8-15-20 Super board of size 1200x1960mm having all four square edges, 10% perforation area of board & hole size of 8,15 & 20mm diameter , scattered spacing, backed with acoustic tissue, having NRC values 0.55, is then screw fixed to ceiling section with 30mm Rigitone screws/25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 170mm centres. For higher NRC value, Resin bonded glass wool of 24kg/M3 and 50mm thick can be placed on top of the board (Refer Rigitone Activ’Air 8-15-20 Super - PDS for the NRC values). Finally all square edges of the boards are to be jointed and finished so as to have a flush look. The joint filling using Vario joint filler and Rigitone joint filler set technique should be employed for the joint-less installation of Rigitone perforated boards with continuous Perforation. After installation and joint-filling, the boards should be primed and then painted with a short haired paint roller. Paint should not be applied using a brush or spray diffuser . Serrated steel section has effective thickness of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as compared to plain steel section"

MISCELLANEOUS WORKS

ACCESS FLOORING -Providing & fixing anti-static flooring at server room with pedestal supports & complete

Providing & fixing TRAP DOOR with T.W. frame work and shutter made from19mm marine plywood and exposed surface finished with 1.5mm laminateand internal surface finished with flat oil paint with s.s. fittings & fixtures of make (ozone, Hettich, Hafle)as per Architectsdetailed drg. and design

"Providing and laying in position ready mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in ecommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete)" "Slabs, Suspended floors, roofs, landings, balconies, canopy and access platform"

Providing and applying at all levels approved silicone sealant at the junction of wall and ventilators or windows as directed, wherever required or instructed by the Engineer etc. complete as specified in manufacturers specificaitons and directed.

Fabricating and fixing of reception table of size 3000mm x 850mm x 1050mm with Table Top formed of approved 12mm thick Acrylic solid surface with edges as per details. To have transaction counter made of 19mm thick Ply boxing finished with approved 10mm thick Acrylic solid surface; shade as per details. To have vertical supports formed of 19mm thick Ply boxing finished with approved 4mm thick veneer as per details. Inside surface of the boxing to be finished with laminate. To have facia made of 19mm thick Ply boxing to accommodate the raceways. Rate to include 2 pedestal units finished with Veneer and complete Melamine finish. Providing drawer pedestals with two drawers of 150mm ht and one drawer of 325 ht as per details. Drawers made of 19mm thick HDF Board finished with 1 mm Thk Laminate inside. Rate to include 75mm high skirting as per details. SS stipr of 12mm thk to be consider at the table facia & key boards to be provided Rate should include necessary hardware like castors, brass hinges, ball catches, fully extendable drawer slides, locks, handles etc., of approved make, the table to have provision for the electrical & networking cables entry and boxing required including cutouts required to mount the electrical & networking plates.

Same as above Reception table - 1800X750mm

Same as above Reception table - 2000X600mm

Same as above Security table - 1050X600mm with back storage in laminate finish

Same as above security table - 900X600 with back storage in laminate finish

Same as above security table - 1200X00mm with back storage in laminate finish

Full height storage Depth shall be 600mm to 700 mm. Providing and fabricating Full height storage as per details made of 19mm plywood finished with laminate. To have necessary ply backing as per details. Storage to have necessary shelves formed of 19mm HDF Board finished with 1mm laminate. Shutters made up of ply finish with laminate. Shutters to be provided with necessary hardware's like hinges, tower bolts, SS handles, magnetic catchers and locks etc., of approved make and quality. Shutters to be post formed. The unit to be hung on to walls / partitions. All the exposed surfaces to be finished with laminate of approved shade and inside surfaces to be finished with 1 mm Thk Laminate. Cost should include Borer / Antitermite treatment for salwood and HDF Boardwood.

Same as above Storage with multiple drawers on soft closing channel as per details

Low Height Storage in Ply-Laminate Providing and constructing low height storage of width upto 450mm and size as per drawings, with top, sides and bottom in 19mm thick ply, back in 8mm thick marine ply, intermediates in 19mm thick marine ply, shutter in 19mm thick ply and finished with 1 mm thick laminate with edges in matching wood beading finished in matching melamine polish. All external surfaces to be finished in approved 1 mm thick laminate. with 1 mm thk balancing laminate on the interior surface.. Rate to include hardware such as approved locks, auto closing hinges for shutters, approved handles, door stop, tower bolt, etc. complete.

Running counter with pedestal laminate finish Providing & fixing of 600mm deep storage with counter top, bottom, intermediates, Pedestal made out of 19mm BWP Ply finished with laminate of approved shade as per architects approval. Drawer to be post formed and to be fixed with all necessary accessories like soft closing drawer channel, locks (multi-purpose), Brushed SS handle, ball catches all complete., as directed by Architect / PM. counter to have 150mm high laminate band & 75mm high laminate skirting of approved shade. To have 9mm BWP Ply backing finished with laminate of approved colour as per details. Cost should include Borer and Antitermite treatment for block board and BWP Plywood. All the inside surfaces of the unit to be finished with 0.8mm laminate and exposed surface to be finished with 1mm laminate.

same as above but without pedestal

Running counter with pedestal laminate finish ht 1200mm (Table top 750+450) above table ply band with height 450mm and 150mm W with laminate finish with 12mm SS road as per image & drawing

Laminated high counter - 450 to 500 mm deep x 1050 Ht. Running Counter Providing & Fabricating High counter made in 25 mm thk BWP ply with laminated finish. Counter under structure frame in SS finish. As per dawing & details.

Overhead unit - Providing and fabricating Over head storage as per details made of 19mm thick ply finished with laminate. To have necessary 6mm thick ply backing as per details. Storage to have necessary shelves formed of 19mm thick ply finished with 1mm Thick laminate. Shutters to be post formed and to be provided with necessary hardware's like soft closing loaded hinges, tower bolts, SS handles, magnetic catchers and locks etc., of approved make and quality. The unit to be hung on to walls / partitions. All the exposed surfaces to be finished with 1.2mm thk laminate and inside surfaces to be finished with 1 mm Thk Laminate. Cost to include antitermite treatment / borer treatment for salwood / HDF Boardwood.

Janitor - Providing and constructing 400mm To 500 deep janitor closet with top, sides and shutters in 19mm thick marine ply of approved make, back in 8mm thick marine ply. Intermediate shelf in 19mm thick marine ply and finished in approved laminate . All exposed or external surfaces to be finished in approved laminate. The interior of the shutter including the shelves to be finished in approved laminate, the shelves shall be removable. All exposed edges to be finished in matching PVC edge binding.Rate to be inclusive ofall required approved hardwares like dead locks,approved handles, magnetic ball catches etc. complete with necessary frame work & hardware's like hinges, lock, etc. for Janitors

Providing and Supplying of Decorative Console stoarge system in MPH area as per detail and drawing size. 2000X1050X750mm

Fabricating and fixing of metal lockers with each locker of size 300W x 450D x 450mm ht. Overall locker unit size shall be 900mm (W) x 1950mm (Ht); having 12 individual lockers in combination of 3 x 4 lockers cabinet.

Laminate counter with storage underneath Providing & fixing of 600mm deep storage with counter top, bottom, intermediates, shutters formed of 19mm BWP Ply finished with laminate of approved shade as per architects approval. Shutters to be post formed and to be fixed with all necessary accessories like spring loaded box hinges, tower bolts, locks (multi-purpose), Brushed SS handle, ball catches all complete., as directed by Architect / PM. Provide adjustable shelf made of 19mm BWP Ply finished with 0.8mm laminate. To have 150mm high laminate band & 50mm high laminate skirting of approved shade. To have 9mm BWP Ply backing finished with laminate of approved colour as per details. Cost should include Borer and Antitermite treatment for block board and BWP Plywood. All the inside surfaces of the unit to be finished with 0.8mm laminate and exposed surface to be finished with 1mm laminate. Cost to include cut-outs for switches, sockets and data points wherever required and the surface to be finished accordingly. Counter to be provided with necessary wire manager and cost should include cut-outs for wire manager in the counter.

Granter top on counter with storage undernet

Providing and fixing in position Curtain rod of aluminium colour anodized circular tubular section including the fixing sockets on both sides.

MPH tabel for stage area Fabricating and fixing of table size of 3000x 600mm x750mm height per details and in 2 parts removable type, top To have 40mm thk ply with veneer finished vertical supports to be provided 19mm ply boxing supports to be provided all the veneer surface will have the melamine polishing and inside laminate finished.

Same as above but table size 1500X600mm

15 seater table Fabricating and fixing of table of over all size 5000 X 1500 X 750mm and shape rectangular along. details with38mm thk corian top .wooden beading at the edge,, & below table top Wooden box storage to be provided made out of 19mm ply storage to have the shutter with louvers as per detail, Table top to have Top flap/cut out for (200mm wide open) electrical/data pop up switch boxes service the electric equipments as required as per detail drg.all expose surface to have 4mm thk veneer with melamine finishing, Inside surface of the boxing to be finished with .8mm laminate. for more detail shop drawing mentioning the AV component requirements should be submitted by the contractor to the architect for approval before fabrication of the table. Rate should include necessary hardware brass hinges, ball catches, locks, handles etc., of approved make.

Running Counter for Disply inAcrylic Solid Surface High counter- Fabricating and fixing Acrulic finish counter tops of 25mm thick and 600mm to 650 mm deep with vertical supports made out of 19mm thick ply, finished inAcrylic with all necessary supports and as per the approved drawingss.

SET OF 3 DIFFERENT SIZES OF BRANA – EACH 3 NOS.

Providing and Supplying fixed stage, at MPH. Size 7000mm x 2800mm x 750mm. Stage made out of MS frame work with ply finished and top to be finished with wooden Ply to receive wooden flooring

Same as above portable stage at MPH size 2400X4800mmX 150mm HT

P/F MS Support for executing Structural Steel works above 3.5 Mtr height @ MPH Floor (Ceiling supports, Beam strengthening, Box section, partition supporting & plate fixing) the rate includes the scaffolding required to execute the wo

SS 304 grade cornder guard to be provided for Column / Wall with size of 12mm x 12mm

AV unit Providing and fabricating AV unit of upto 550mm depth & 800mm height, as per details made of 19mm Ply finished with 4mm thick veneer. To have necessary 6mm Ply backing as per details. Storage to have necessary shelves formed of 19mm Ply finished with veneer & melamine polish. table top & side vertical will have the thk of 40mm, Shutters to have louvers and to be provided with necessary hardware's like spring loaded hinges, tower bolts, SS handles, magnetic catchers and locks etc., of approved make and quality. The unit to be hung on to walls / partitions. All the exposed surfaces to be finished with veneer of approved shade and inside surfaces to be finished with 0.8mm laminate. All veneer surfaces to be melamine polished.

Strengthening of the slab Fabrication and fixing of structural memebers to strengthen the slab. The work to include fabricating proper support system using appropriate size IS sections, Channels or Beams, anchoring required size MS plate on the columns / beams using anchor fasteners of Hilti or equivalent, making the bottom surface of slab in perfect line and level (only in the portion where the supporting beams are touching the slab bottom) using polymer treatment, grouting the minute undulations with micro concrete. The rate should include all labour, scaffolding, temporary supporting, lifting arrangement, welding, 2 coats of antrust coating followed by 2 coats of enamel paint of approved shade etc. complete.

Carpet Flooring

Supply Carpet Floor Tiles Carpet must meet the testing and product requirements of the Carpet and Rug Institute Green Label Plus1 program All carpet adhesive must have less than 50 g/L VOC. All carpet cushion installed in the building interior must meet the requirements of the Carpet and Rug Institute Green Label program. Supply of Nylon carpet flooring,. Carpet with style Tufted Textured loop with 100% Solution Dyed. Machine GUAGE : 1/12 WITH 4.MM +/- 0.5MM Pile Thickness and total thickness 7.00mm +/- 0.5mm . Tile Size 60cm x 60cm. Heavy duty with backing structure of GlasBac® or GlasBac®RE. Carpet should be Antimicrobial with Intercept® and Soil / Stain Protection. Carpet should be 22 to 24 ounce as per manufacture specification& green certified.

Installation Installation of carpet as per design & drg & covering the carpet floor with thick plastic sheet to be held on the floor as well vertical sides and maintained in position till the handover of the respective area with vacuum and Shampooing.

Interior Signage

Supply and Installation of Door Signage PUSH PULL (Metal) Specification: Size : 80mm x 80mm;Material : Etched graphics on brush steel plates.

Room sign - size - 250 x 250 mm / 500 x 250 mm Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge.>> Sign Face Shall be made in 18 gauge thick Brush finished SS sheet profile cut to match shape as per drawings, fixed to frame (both side) using 3M VHB tape on the horizontal sides of the panel, as per approved sample. Sign Plate Providing and fixing sign plate in 8mm thk Black Acrylic , as per drawing. Plate to be directly fixed to the wall. Frame to receive the sign faces. Text Providing and pasting all text in plotter cut opaque cast vinyl as per the specified black color and content given for each location for each face. >> Graphics Providing and pasting all Graphics in opaque cast vinyl as per the specified light blue/grey (as approved) color

Fire Extinguisher Signage Size 150X212mm : Providing and fixing all Photoluminiscent signs as per locations given in sign schedules, made of Digitally printed signs on Photoluminiscent vinyl pasted over a 3mm thick white acrylic plate, with a protective over laminate and using provided artwork including all operations from procuring the correct materials and made to sizes as specified and approved by the Engineer-in- charge. including all installation activities like marking, alignment and fixing with screws into the wall/cladding/face to the satisfaction of the Engineer- in-Charge

Evacuation Acrylic sheet 6mm thick double acrylic sheet to be provided on SS stud for floor map & evacuation layout, approx size will be 700mm 600mm, Printing of the evacualtion plan on the Glow paper (A3 SIZE) is inclusive in the cost

Interior Direction sign - Suspended Refer design drawing - size - 1200x 300 mm Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge.>> Sign Face Shall be made in 18 gauge thick Brush finished SS sheet profile cut to match shape as per drawings, fixed to frame (both side) using 3M VHB tape on the horizontal sides of the panel, as per approved sample. Sign Frame Providing and fixing sign frame in 25mmX25mm Aluminium square section powdercoated in Black as per drawing. Frame to be directly fixed to the true ceiling and should match with the level of false ceiling. Frame to receive the sign faces. Text Providing and pasting all text in plotter cut opaque cast vinyl as per the specified black color and content given for each location for each face. >> Graphics Providing and pasting all Graphics in opaque cast vinyl as per the specified light blue/grey (as approved) color Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws , rivets, bolts, washers, nuts, etc. complete as per drawing.

Design supply, fabrication and fixing of SS, non glaremultilingual Braille (raised dots) entrance signage (size1ftx1ft) as per the approved design and make, indicating the name of the building. Having 1.2mm thick SS non glare blue coloured base plate with the 'Universal Accessibility Symbol' and Upper case Sans Serif words of height 15 mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 15mm in white colour. Grade 2/Grade 1 Braille to beetched/engraved and be raised 0.5mm above base plate. The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200mm from the finished ground/floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge.

Compony logo - Reception LOGO Main Logo made our of Acrylic with background and backlit light should be wall mounted at the eye level on a existing surface. Size 2400mm X 600mm

Washroom Signage - size - 225 x 270 mm Supply and Installation of Washroom Signage:- (Metal) Specification Size : 225 mm x 270 mm Text height : 30 mm Material : Black etched graphics brush steel plates. Should be ceiling mounted with light.

Floor number Sign Refer design drawing Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. Sign Face Providing and pasting at location graphics in opaque brushed SS finish vinyl (3M brand) pasted on prepared smooth surface, including all operations from printing, cutting and pasting, all complete as per drawings, technical specification, signage schedule and to the satisfaction of the engineer-in-charge. Graphics Providing and pasting all Graphics in opaque cast vinyl as per the specified light blue/grey (as approved) color neatly placed on sign face.

Chairs

Supply & Installation ENGAGE CHAIR KEY FEATURES Superior Knee Tilt Synchronized Mechanism Multiple locking system Adjustable Armrest Pneumatic for seat height adjustment Standard 5 prong Nylon base with castors Upholstery: Fabric (Black) Greenguard , IAQ , Greenpro Certified Tested for BIFMA standards adherance

Supply & Installation of PULSE CHAIR Key Features Superior Knee Tilt Synchronized Mechanism Multiple position locking system Height Adjustable Armrest Pneumatic for seat height adjustment Standard 5 prong Nylon base with castors Upholstery: Fabric (Black) Greenguard , IAQ , Greenpro Certified Tested for BIFMA standards adherance

Modular furniture

LINEAR WORK STATION Table size: 1350mm (W) x 600mm (D) x 1050mm (HT)(750+300) System: Desking System DESCRIPTION: Main Spine: 18mm thick frameless panel of size 900mm(W) x 300mm(H) with Fabric Magnetic board is considered on Aluminium dia cast powder coated smart bracket and Fabric should be detachable. Table top: 25mm thick E1 grade PLPB table top with Raheau made matching 2mm thk edgebanding with Table top edges is reversed chamfered profile and Table End edges to be round in 25 mm Radius . and aluminum flip up provision of size:- 450mm(W) x150mm(D) anodized finish with soft closing. Switch plate to be fixed in angle with all necessary hardware.. Under Structure: MS Powder coated legs (standard powder coating between 60 and 80 microns), Legs should be grey color (End Legs) with die cast connectors and MS Powder coated 30x40mm beams are considered to support table top. Wire Management:MS-Powder coated 60mm thk Below table top metal Hung race way having metal fascia of ht 425mmX60mm considered for electrical cutouts and MS powder coated vertical cable risers 60x30mm/Vertical post 100x100mm are considered for wire management Metal Modesty & Leg Modesty ( Sharing & Non sharing ) : 1.2mm thk CRCA Sheet powder coated metal half perforation modesty ( Linear/ Geometrical Pattern in Modesty) is considered in legs at end of the cluster of 650mm ht ACCESSORIES: 1.Non-Sharing Metal mobile pedestal 2 equals drawer with 50mm ht. cushion on top (400W*450D*570H) :Metal CRCA powder coated Mobile pedestal unit with 50mm top cushion consists of upper 1 box drawer + 1file drawer with Inner Metal Powder coating boxing sliding with soft closure Telescopic channels with rollers consists of 05no's Castors with metal concealed handles ( Length of Drawer handle is width of Drawer ) and having 3 digit numeric lock considered per pedestal drawer (1qty for 2 ws Sharing Pedestal ) 2.Metal name plate: MS powder coated metal name plate with clear arcylic slider considered and size as 160x60mm (1qty for Per ws)

Same as above but size Workstation 1200 X 600 X1050 mm with pedestal

Same as above but size Workstation 1050 X 600 X1050 mm with sharing pedestal

same as above but size Workstation 1500 X 600 X1050 mm with pedestal

L shape WORK STATION Table size: 1500mm (W1)+1200mm(W2) x 600mm (D) x 1050mm (HT) System: Desking System DESCRIPTION: Main Spine: : 8mm thick frameless panel of size 1350mm(W) x 300mm(H) with Back painted glass thickness of glass 4 + 4 mm sandwich glass with both side writable is considered on Aluminium dia cast powder coated smart bracket and should be detachable. Return Spine: 18mm thick frameless panel of size 1050mm(W) x 300mm(H) with Fabric Magnetic board is considered on Aluminium dia cast powder coated smart bracket and Fabric should be detachable. . Table top: 25mm thick E1 grade PLPB table top with Raheau made matching 2mm thk edgebanding is reversed chamfered profile and Table End edges to be round in 25 mm radius . and aluminum flip up provision of size:- 450mm(W) x150mm(D) anodized finish with soft closing. Switch plate to be fixed in angle with all necessary hardware. Under Structure: MS Powder coated legs (standard powder coating between 60 and 80 microns), Legs should be grey color (End Legs) with die cast connectors and MS Powder coated 30x40mm beams are considered to support table top. Wire Management:MS-Powder coated 60mm thk Below table top metal Hung race way having Metal fascia of ht 425mmX60mm considered ( Considered in main spine only) for electrical cutouts and MS powder coated vertical cable risers 60x30mm/Vertical post 100x100mm are considered for wire management Metal Modesty & Leg Modesty ( Sharing & Non sharing ) : 1.2mm thk CRCA Sheet powder coated metal half perforation modesty ( Linear/ Geometrical Pattern in Modesty) is considered in legs at end of the cluster of 650mm ht. ACCESSORIES: 1.Metal mobile pedestal 2 equals drawer with 50mm ht. cushion on top (400W*450D*570H) :Metal CRCA powder coated Mobile pedestal unit with 50mm top cushion consists of upper 1 box drawer + 1file drawer with Inner Metal Powder coating boxing sliding with soft closure Telescopic channels with rollers consists of 05no's Castors with metal concealed handles ( Length of Drawer handle is width of Drawer )and having 3 digit numeric lock considered per pedestal (1qty for Per ws) 2.Metal name plate: MS powder coated metal name plate with clear arcylic slider considered and size as 160x60mm (1qty for Per ws) ( Considered only in main spine panel only per user )

CABIN TABLE The work top to be 25mm thick particle board finished with laminate, also the work surface should have a seamless (hair line) joint between the two surface to give a continuous look. Adequate supports to be provided to the work surface for preventing it from sagging. To provide total flexibility of the work surface cable management, the work top should be with open able flap with brush. Prelam Gable end 600mm x 750mm H Under Structure: Prelam partical board Gable end required to support the table top. Adequate supports to be provided to the work surface for preventing it from sagging. Cable Management: There should be proper cable management system to provide for the cable to run from the flooring to the horizontal cable management. The vertical cable management should be easy accessible from both the sides and shall be open able. These raisers should have compartments to house 20 mm diameter flexible conduit or cables for separation between the power and data cables. Storages: Should come with 25mm thk laminate top with shutters. The sizes of Storage 900Lx 600D x 750H below the table top. The carcase should be prelam partical board with app finish laminate. Inside the storagae the half should be a box used for storing box files and half should be with adjustable shelf. All Storage to have numerical locks with master key for opening. Pedestals : Pedestals should come with two drawers and one box file drawer, shall be 650Ht x 400L x450D. the carcase should be metal with approved powder coating and facia will be in lamiante. All pedestal to have numerical locks with master key for opening and on leveller.

Cabin table main table - 1800X750X750mm Side table - 1050X450X750mm Back table - 1800X450X750mm

Cabin table main table - 1800X750X750mm Side table - 1050X450X750mm

Cabin table main table - 2100X800X750mm Side table - 1200X450X750mm

Cabin table main table - 1650X750X750mm Side table - 1050X450X750mm

Cabin table main table - 2250X750X750mm

Cabin table main table - 2400X1050X750mm

Cabin Table in L shape Main Table 2100X1200mm

Round table size: 750mm(Dia) x 750mm(Ht) -01 Flipup Type: Loose furniture Table Top: 25mm thick Prelaminated Particle Board with 2mm Thick edge PVC Edge Binding, machine pressed using hot melt glue Under structure is made of MS powder coated pole supprted to table top. This makes it water resistant and in turn rust resistant. It is designed for sturdiness as it is in welded construction. Levelers are provided to take care of any minor level variations on the floor.

8 SEATER MEETING TABLE Size: 3000mm (W) x 1200mm (D) x 750mm (HT)-02 Flipup ( Twin tables -1500Wx1200-02 No.s) TYPE: Loose furniture TABLE TOP: 25mm thick E1 grade PLPB table top with matching edgebanding, Table top edges with reversed chamfered profile and Table corner round 25mm Radius. and 2 no aluminum flip up provision of size:- 600mm(W) x135mm(D) anodized finish with soft closing,. UNDERSTRUCTURE: End Legs:- MS powder coated legs, Legs should be grey color & MS-Powder coated beams 30mm x 40mm are considerd for supporting table top. WIRE MANAGEMENT: MS-Powder coated wire tray with switch plate and vertical cable raisers / PVC wireguard are considerd for wire management. Fixed swing door cabinet in laminate finish size L 650 x W 450 x H 725 also consider MS box / raceway to cover the cable cubby as per approved size of cable cubby

6 SEATER MEETING TABLE Size: 2250mm (W) x 1050mm (D) x 750mm (HT)-01 Flipup TYPE: Loose furniture TABLE TOP: 25mm thick E1 grade PLPB table top with matching edgebanding with table top edges with reversed chamfered profile and Table corner round 25mm Radius aluminum flip up provision of size:- 600mm(W) x150mm(D) anodized finish with soft closing. UNDERSTRUCTURE: End Legs:- MS powder coated legs, Legs should be grey color & MS-Powder coated beams 30mm x 40mm are considerd for supporting table top. WIRE MANAGEMENT: MS-Powder coated wire tray with switch plate and vertical cable raisers Size 100X100mm are considerd for wire management also consider MS box / raceway to cover the cable cubby as per approved size of cable cubby

4 seater Discussion Room size: 1050mm(Dia) x 750mm(Ht) -01 Flipup Type: Loose furniture Table top: 25mm thick E1 grade PLPB table top with matching edgebanding is reversed chamfered profile and aluminum flip up provision of size:- 350mm(W) x150mm(D) anodized finish with soft closing. Understructure: MS powder coated legs are considered for supporting table top, Legs should be grey color. Wire management: MS-Powder coated wire tray with switch plate and vertical cable raisers in MS size 100X100mm are considerd for wire management also consider MS box / raceway to cover the cable cubby as per approved size of cable cubby

Supply & Installation of Cubicle workstation Type: 50mm Panel Base System Table top : 25mm thick E1 grade prelaminated table top with matching edgebanding, Table top edges with reversed chamfered profile with Aluminum Flipup 450mm(W) x 150mm(D) provision in anodized finish with soft closing. Table top edge should be round near passage side 50mm thick partition Above table top:- Each will have One Fabric Pinup (Soft) board , one glass marker & rest all will be fabric hard board Below table top For main table :- Both sides pre laminate tiles with two level raceway in main spine & skirting level raceeways. Understructure For Main & side table : MS Powder coated legs (standard powder coating between 60 and 80 microns), Legs should be grey color and MS Powder coated beams 40x30mm consideredfor table support. BTT Modesty For Main table: 1.2mm thk CRCA Sheet powder coated Metal half perforation modesty considered of 450ht from table top 150 mm inside from tabel Wire management: 2 level race ways - one at BTT only at main spine & skirting level race way at main spine Cubical partition sizes: 3000mm (L1) + 2550mm (L2 ) x 1050mm (H)x 50mm thick with Main table size: 1650mm(W) x 750mm(D) x 750mm(H), Side tabel 1050X450mm Metal name plate: MS powder coated metal name plate with clear arcylic slider considered and size as 160x60mm (1qty for Per Cubical) Metal (2d+1f) mobile pedestal with cushion top (400W*450D*650H) :Metal CRCA powder coated Mobile pedestal unit consists of upper 2 box drawer + 1file drawer with Inner Metal Powder coating boxing sliding with soft closure Telescopic channels with rollers consists of 05no's Castors with metal concealed handles ( Length of Drawer handle is width of Drawer ) and having 3 digit numeric lock considered per pedestal (1qty for Per Cubical).

Filling table & metal seating 1050X600X1050mm Having Ms Frame in 50X25 2mm thick with end closing caps, Cross bar 50X50 2mm thick MS tube, Table top non-Esd laminated post formed table top (particel board ) without notching with 2 no reactangular grommet holes provided with closing caps, drawer non-esd wooden single drawer with handle (18mm- plb) fixed below table top, drawer including door handle and lock.

LHS 1200X450mm

Cafeteria Furniture

Supply and Installation Cafeteria table :- 2 Side Post Formed rounded & 2 Side Edge Band - Specs -Table Top :MDF 25mm thick interior grade, Emission standard of E2. Density of 650 - 700kg /m3. Core made of tropical hardwood. Edge Banding : PVC , 2mm thick, Glue: Hot melt glue, material EVA, melting point of 160 -165'C, applied on thru feed machine at 180 -200"C, Laminate : Postforming grade, 0.6mmthick, Base & Under Structure will be in SS 304

Cafeteria chair - Fiber LEG WO ARM WO CUSN Specs: Polypropelene with Fiber Leg, Net Wt:3.4Kg, W-587XD-450XH-805mm

Cofeeshop chair - Supplying & Installation of lounge chair as per attached image in leathrite finish

HIGH CHAIR FOR COUNTER - Executive Dining area in Letahrite finish

Bought Out furniture

Round High Table Supplying & Installation table as per attached image - wooden top & metal powder coated frame for understucture Average size Upto 1050 mm Height &900 mm Dia

TABLE - EXECUTVE DINING AREA Dining Table, top finish with Corian Size : 1050*1050*750mm ht Top- 18mm thick plywood Base-Mild steel Black powder Coated legs(Triple column)

Supply and Installation of 6 Seater Round Table of 1500mm dia folding system for MPH area 1500 mm Diameter Foldable table. With Top in Pre-Laminated Particle Board top 25mm thick with S S 202 rim 3mm thickness on Circumference. Table top rim bottom fitting Covering with 2inch ply. S S 202 Table leg 750mm height approx. Table top fitted with bottom frame size approx. 40’’ x 40”. Vertical folding table leg (4nos) in 50mm diameter (Round) with heavy lockable castors.

Supply and Installation of Chairs for MPH Area - Foldable & Stackable Chairs of fabric upholstery

CenterTable Type 2 - Providing & Supplying metal side table finished in powder coating Avrage Size - 400 mm x 300 mm x 500

Center Table Type 6 Providing & Supplying center table Center Table Top- 18 mm Thk Plywood 1 mm Thk Laminate Base-Mild Steel White Power Coated Legs Size : Dia 500 Ht. 450 mm

High Table - Providing & Supplying center table in wooden top with PU finish and SS leg size 800 mm Dia with 1050 mm Height

EXECUTIVE CENTER TABLE TYPE 1 Providing & Supplying center table as per attached imageCenter Table Size : 1200*750*450mm ht Top- 18 mm Thk Plywood 4 mm Thk Venner Base-Stain less steel Brush finished frame and legs

EXECUTIVE SIDE TABLE Providing & Supplying center table as per attached imageSide Table Size : 600*600*450mm ht Top- 18 mm Thk Plywood 4 mm Thk Venner Base-Stain less steel Brush finished frame and legs

EXECUTIVE CENTER TABLE TYPE 2 Providing & Supplying center table in wooden top with P as per attached image Coffee Table Size : 750mm dia 550mm ht White Duco painted Top part Natural beech wood base

EXECUTIVE CENTER TABLE TYPE 3 Providing & Supplying center table as per attached image in wooden top and ss metal legs Average Size - 1200 mm x 900 mm x 450 mm

EXECUTIVE SIDE TABLE Providing & Supplying center table as per attached image in wooden top and ss metal legs Average Size - 625 mm x 625 mm x 450 mm

EXECUTIVE LOUNGE CHAIR TYPE 1 Supplying & Installation of single seater lounge Chair in leatherite finish

Electrical Works

PANELS & DISTRIBUTION BOARDS

Supply,installation, testing & commissioning of following panel boards : Type of Construction: "Floor/wall mounted cubicle type panel Fabricated from 14/16G CRCA sheet steel Totally compartmentalized, treated for rust proofing. with separate busbar chamber & cable chambers Access: Front /Back access for switchgears, connectors etc.[Form 3b/4b] Operating Voltage: Suitable for 430 V, 3 phase / 4 Wire System , 50 Hz supply Ambient temparature :40/45 Deg Celcius Phase Indicating Lamps :LED based Protective realay :All main panels shall have Earth leakage relay Current transformers :Class 1 Type with 15VA burden CT's & ControlMCB's:As per specification/ requirement [Untill unless specified] IBMS/ IOT Panel & components shall be compitable with IBMS & IOT [Refer SLD]"

MLTP -GF

MLTP -1F

MLTP -2F

MLTP -3F

MLTP -4F

MLTP -5F

MLTP -6F

UPS OUTPUT DB

INVERTER DB

SERVER DB

HUB DB/MUX DB

EQUIPMENT DB -1F

EQUIPMENT DB -2F

EQUIPMENT DB -3F

EQUIPMENT DB -4F

VENTILATION SYSTEM PANEL[ALLWEATHER TYPE]

CANTEEN DB

Lighting DB's (LDB): Supply,installation, testing & commissioning" "Wall mounted MCB double door DBs manufactured from 16/18 G CRCA sheet steel with powder coated finish, Segmented distribution & complete with the following: Controlling Unit 1 No. - 25A MCB, TPN, 10 KA, C Curve Feeders/Outgoing 24/30 Nos. -- 06A MCB, SP, 10 KA , C Curve with 3 Nos.-- 25A RCBO, DP, 30 mA, A Class (One Per Phase) Distribution Three Phase with Neutral & Earthing [Note: All DB's shall be Phase Segregated Type Only]

Raw power/ AC Inddor DB (RPDB): Supply,installation, testing & commissioning Wall mounted MCB double door DBs manufactured from 16/18 G CRCA sheet steel with powder coated finish, Segmented distribution & complete with the following: Controlling Unit 1 No. - 63A MCB, TPN, 10 KA, D Curve with 3 Nos.-- 63/40A DP RCBO, 300mA, (One Per Phase) Feeders/Outgoing 24/30 Nos. -- 16/25A MCB, SP, 10 KA , D Curve Distribution Three Phase with Neutral & Earthing

Emergency Lighting DB (DBE): Supply,installation, testing & commissioning "Wall mounted MCB double door DBs manufactured from 16/18 G CRCA sheet steel with powder coated finish, Segmented distribution & complete with the following: Controlling Unit 1 No. - 16/25A DP RCBO, 30mA, A Class Feeders/Outgoing 10/12 Nos. -- 06A MCB, SP, 10 KA , C Curve Distribution Single Phase with Neutral & Earthing"

"UPS/Computer DB (Type 1) Supply,installation, testing & commissioning" "Wall mounted MCB double door DBs manufactured from 16/18 G CRCA sheet steel with powder coated finish, Segmented distribution & complete with the following: Controlling Unit 1 No. - 63A MCB, FP, 10 KA, D Curve with 3 Nos.-- 63/40A DP MCB (One Per Phase) Feeders/Outgoing 30/36 Nos. -- 16A MCB, SP, 10 KA, D Curve Distribution Three Phase with Neutral & Earthing"

"UPS/Computer DB (Type 2) Supply,installation, testing & commissioning" "Wall mounted MCB double door DBs manufactured from 16/18 G CRCA sheet steel with powder coated finish, Segmented distribution & complete with the following: Controlling Unit 1 No. - 63A MCB, DP, 10 KA, D Curve with 1 No.-- 63/40A DP MCB Feeders/Outgoing 14/18 Nos. -- 16A MCB, SP, 10 KA, D Curve Distribution Three Phase with Neutral & Earthing"

MCCB/MCB/Isolator/ Switches/Tap-Off Boxes Supplying & installing the following TPN/DP Isolators/MCCB/MCB's along with cable boxes suitable for cables as indicated with all mounting hardware & acessories

40+63A FP MCB+ELCB, 300mA in weatherproof enclosure

32/40/63A TPn MCB in weatherproof steel enclosure

32/40/63A DP MCB in weatherproof steel enclosure

20A Metal Clad Socket outlet with 1 No. 20A DP MCB (AC, Geyser etc.)

63A TPn MCCB in steel enclosure

16/20/32A 3/5 pin industrial socket outlet with lockable facility in steel enclosure with 1 No. 16/20/32A DP MCB (IEC60309 Type)

32/40/63A 5 pin(TPN) industrial socket outlet with lockable facility in steel enclosure with 1 No. 32/40/63A DP MCB (IEC60309 Type)

16A/ 5 pin(TPN) industrial socket outlet with lockable facility in steel enclosure with 1 No. 32A DP MCB (IEC60309 Type)

5/15A Switched socket outlet in weatherproof encloser

Note : (1) Abbravation Used: (A) LTG - Lighting (B) EME- Emergency (C) Al / Alu. - Aluminium (D) Cu. - Copper (E) Sw - Switch (F) DB - Distribution Board (G) MS - Mild Steel (H) CT - Current Transformer (I) SFT - Smoke Supperation, Flame retardnt.Temperature Stable (J) FRLS - Fire Retardant Low Smoke (K) HF - Halogen Free (L) GI - Galvanised Iron (2) All the Aluminium Busbar shall be of EC grade

CABLING and ACCESSORIES :

Supply, laying, Installation, Testing & Commissioning Following sizes of FR -XLPE /SWA/FR XLPE insulated armoured 1100V grade aluminium & copper conductor cables fixed to walls, existing trays by means of saddles, etc. [Cables shall be supported with GI sections whenever cables are laid without cable trays. All the cables shall have tagging, ferruling etc. as required]

Three and Half Core 300 sqmm Al.

Three and Half Core 240 sqmm Al.

Three and Half Core 185 sqmm Al.

Three and Half Core 150 sqmm Al.

Three and Half Core 70 sqmm Al.

Three and Half Core 35 sqmm Al.

Three and Half Core 25 sqmm Al.

Four Core 16 sq.mm Al.

Four Core 25 sqmm Cu.

Four Core 16 sqmm Cu.

Four Core 10 sqmm Cu.

Four Core 6 sqmm Cu.

Four Core 4 sqmm Cu.

Three Core 6 sqmm Cu.

Three Core 4 sqmm Cu.

Three Core 2.5 sqmm Cu.

Four Core 2.5 sqmm Cu.

Four Core 1.5 sqmm Cu.

Seven Core 2.5 sqmm Cu.

Supply, laying, Installation, Testing & Commissioning Following sizes of FR PVC insulated Flexible 1100V grade copper conductor cables fixed to walls / trays/ in SFT PVC Conduits by means of saddles, etc.

Single Core 120 sqmm Cu.

Single Core 50 sqmm Cu.

Single Core 35 sqmm Cu.

Single Core 25 sqmm Cu.

Single Core 16 sqmm Cu.

Single Core 10 sqmm Cu.

Three Core 2.5 sqmm Cu.(Hub/Sever/LAB Room)

Four Core 10/06sqmm

Cable end Termination, Following sizes of FR -XLPE /SWA/FR XLPE insulated 1100V grade aluminium & copper conductor cable using brass glands (double compressed type) and aluminium / copper crimping type lugs.

Three and Half Core 300 sqmm Al.

Three and Half Core 240 sqmm Al.

Three and Half Core 185 sqmm Al.

Three and Half Core 150 sqmm Al.

Three and Half Core 70 sqmm Al.

Three and Half Core 35 sqmm Al.

Three and Half Core 25 sqmm Al.

Four Core 16 sq.mm Al.

Four Core 10 sq.mm Al.

Four Core 25 sqmm Cu.

Four Core 16 sqmm Cu.

Four Core 10 sqmm Cu.

Four Core 6 sqmm Cu.

Four Core 4 sqmm Cu.

Three Core 6 sqmm Cu.

Three Core 4 sqmm Cu.

Three Core 2.5 sqmm Cu.

Four Core 2.5 sqmm Cu.

Four Core 1.5 sqmm Cu.

Seven Core 2.5 sqmm Cu.

Cable end Termination, Following sizes of FR -PVC insulated 1100V grade flexible copper conductor cable using sockets/brass glads/adopters etc. and copper crimping lugs.

Single Core 120 sqmm Cu.

Single Core 35 sqmm Cu.

Single Core 25 sqmm Cu.

Single Core 16 sqmm Cu.

Single Core 10 sqmm Cu.

Single Core 06 sqmm Cu.

Three Core 2.5/4/6 sqmm Cu.(Hub/Sever Room)

Four Core 6/10sqmm Cu (Hub/Server Room)

TRUNKING / TRUNKWAY & CABLE TRAY SYSTEM:

Supply& Installating Of Junction Boxes Following size underfloor GI junction boxes having the GI cover(as called for) along with knockouts for pulling cables. Rtae shall be complete with blank plate / support made of 25x3mm MS/ Aluminium flat (as called for). Supports shall be treated for rust proofing and two coats of black enamel paint Cover shall be finished with powder coating ( as approved)

350x350x50mm with 360x360x2mm Cover

250x250x50mm with 260x260x2mm Cover

150x150x50mm with 160x160x2mm Cover

Supply& Installating Junction Boxes with Hinged Cover 300/350 x300/350x 75mm underfloor GI junction boxes having the 360x360mm GI cover with Higes fixed to base Junction box shall have arrangement to fix 3 Nos. of 5A Socket and 1 No. 10A Switch along with 1 Data & 1 Voice Outlet [Make - MK - 300/300/3-1-60-75 or equivalent]

Supply& Installating Trunk Way 100mm wide 38mm high aluminium extrutions having 2.0 mm wall thickness(as called for) with appropriate coupler, T's, Bends etc. Complete with fixing screws, acessories etc.

Supply& Installating 450x100mmx14G galvanised steel raceway with cover for power /tel/ data wiring including necessary bends, T's, fixing screws, etc. fixed to wall /ceiling etc.

"Supply & Installation of followings: [All bends, T's, Joints shall be factory fabricated type only]" Providing and fixing of underfloor /overhead floor raceway made from minimum 1.6 mm thick pregalvenised steel sheet, factory fabricated, of the following sizes knock out holes and fixing accessories earthing stud for terminating 8 SWG copper earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per site requirement. (overhead / wall mounted recovery & function boxes shall be 1.6 mm thick). The pregalvenised sheet shall be as per IS 277 or BS 2989 having tensile strength of minimum 500 N/sq.m and minimum zinc coating of 275 GSM.

200 mm wide x 40 mm deep raceway

100 mm wide x 40 mm deep raceway

50 mm wide x 25 mm deep raceway

Supply& Installating 200x50mmx14G galvanised steel raceway with cover for power /tel/ data wiring including necessary bends, T's, fixing screws, etc. fixed to wall /ceiling etc.

Supply& Installating Perforated GI Cable Tray [All bends, T's, Joints shall be factory fabricated type only]Perforated cable tray of 2 mm thick hot Dip galvanised iron of the following sizes including providing suspender block with 10 mm Gripple make GI suspension bars/ Y-fit stainkless steel support

50x600x50 mm tray

50x450x50 mm tray

50x300x50 mm tray

50x150x50 mm tray

Supply& Installating GI Cable Tray cover Cable Tray cover of 2 mm thick pre-galvanised iron of the following sizes including all fixing acessories, nut bolts etc.

50x600x50 mm tray

50x450x50 mm tray

50x300x50 mm tray

50x150x50 mm tray

Supply& Installating Powder coated raceway [All bends, T's, Joints shall be factory fabricated type only] Providing and fixing of race way made from minimum 1.6 mm thick powder coated M.S., factory fabricated, with internal partition of the following sizes including providing removable double folded cover of 1.6mm thick upto 150mm wide raceway and 2mm thick above 150mm wide raceway, knock out holes and fixing accessories earthing stud for terminating 8 SWG copper earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per site requirement. ( Junction boxes shall be 1.6 mm thick).

300 mm wide x 40 mm deep raceway

200 mm wide x 40 mm deep raceway

Note : Cable trunking / raceways shall be supplied and installed in accordance with the details shown on the drawings. The design and general arrangement of all trunking shall be neat with adequate supports and shall be to the approval of the Consultant.Under Floor Cable Trunking shall be hot dip galvanized(if called for). Cable Trunking / Raceways for use above false ceiling shall be enamel painted whereas under floor trunking / raceways shall be hot dip galvanised.

WIRING INSTALLATION :

Light/Fan point wiring Wiring to light / Fan points with 2x2.5sqmm ZHFRLS insulated copper 1100V grade wire through surface/conceale fixed SFT-PVC conduit by means of saddles,base etc. including earthing of fixtures and outlet boxes with 2.5sqmm ZHFRLS insulated copper 1100V grade wire. Complete with cutting/chasing and making good on brick wall/partition with wiring from DB to switch board and to the first light point. Rate shall include cost of modular type controlling switch with GI Back box, acessories

First Light Point - Siwtch Controlled Including Wiring from DB to Switch Board and Switch board to First Light Point. Cost shall include modular type controlling switch etc.

Secondary Light Point - Siwtch Controlled Including Wiring from Light to Light point

First Light Point - DB Controlled Including Wiring from DB to First Light Point

Secondary Light Point - DB Controlled Including Wiring from Light to Light point

First Light Point - Emergency Light Including Wiring from DB to First Light Point

Secondary Light Point - Emergency Light Including Wiring from Light to Light point

Wiring to Occupancy Sensor Wiring to occupancy/motion detectors using 3x2.5sqmm ZHFRLS Insulated copper 1100V grade wire through surface/conceale conduits

Switch Socket Outlets 5/15A Switch Socket (A)[Geyser/AC's unless untill mentioned] [With SFT-PVC Conduit] Wiring to 15/20 A socket outlets using 2 nos. 4 sq.mm. ZHFRLS insulated copper wires & 1 no. 2.5 sq.mm. ZHFRLS insulated earth wire in 25/32 mm. SFT-PVC conduit from DB independently Cost to include switch socket outlet with GI back box OR 20A Industrial socket outlet with plug top, 1 No. 20A SP MCB with back box etc. Same as Above but using MS conduit

Switch Socket Outlets 5/15A Switch Socket(B) [With SFT-PVC Conduit] [UPS/RAW/Other Points] Wiring to 15 A socket outlets using 2 nos. 2.5 sq.mm. ZHFRLS insulated copper wires & 1 no. 2.5 sq.mm. ZHFRLS insulated earth wire in 20/25 mm. SFT-PVC conduit from DB independently Cost to include 16A 3 pin switch socket plate & GI back box. [Profile Plate shall be with metallic finish or as approved]

5/15A First Power Point Wiring from DB to First Switch socket outlet. Cost to include Switch socket outlet, GI Box etc.

5/15A Secondary Power Point Including Wiring from Power to power point

Switch Socket Outlets 5A Switch Socket [UPS & Others] [With SFT-PVC Conduit] [UPS/RAW/Other Points] Wiring to 6A switch socket outlets using 3C x 2.5 sqmm ZHFRLS Insulated Copper felxible cable of 600V grade drawn trunkig/Conduits with circuit wiring from nearest socket point., surface mounted with all necessary hardware and acessories and switched outlets

5A First Power Point Wiring from DB to First Switch socket outlet. Cost to include Switch socket outlet, GI Box etc.

5A Secondary Power Point Including Wiring from Power to power point

Switch Socket Outlets 5/15A Switch Socket [With SFT -PVC Conduit] [UPS/RAW/Other Points] [Switch and socket will be mounted at different locations separately] Wiring to 15 A socket outlets using 2 nos. 2.5 sq.mm. ZHFRLS insulated copper wires & 1 no. 2.5 sq.mm. ZHFRLS insulated earth wire in 20/25 mm. SFT-PVC conduit from DB independently Cost to include 16A 3 pin switch socket plate & GI back box. [Profile Plate shall be with metallic finish or as approved] Switch and socket will be mounted at different locations separately

Switch Socket Outlets 5A MCB + Socket [With SFT-PVC Conduit] [ For VAV Boxes/VRV Indoor Units] Wiring to 6A modular MCB+ socket outlets for VAV Boxes/VRV Indoor Units using 3 Nos. x 2.5 sqmm ZHFRLS Insulated Copper cable of 600V grade drawn thru' trunkig/Conduits with circuit wiring from nearest DB/socket point as called for ., surface mounted with all necessary hardware

5A Secondary Power Point Including Wiring from Power to power point

Worktable outlet -1 (UPS/Raw) Supplying and fixing of 3x 6/10A Multi-pintype socket with 2x10A Switch outlets with all looping and connecting wires, terminal connectrs, profile plate complete with necessary fixing screws etc. on wall / partition Complete with the wiring from DB using 3Cx2.5sqmm ZHFRLS insulated copper conductor flexible cable with all acessories(Max.of 4 to 6 sets shall be looped)

First worktable outlet Wiring from DB to First Switch socket outlet. Cost to include Switch socket outlet, GI Box etc.

Secondary worktable outlet Including Wiring from Power to power point

Worktable outlet -2 (UPS/Raw) Supplying and fixing of 2x 6/10A Multi-pintype socket with 2x10A Switch outlets with all looping and connecting wires, terminal connectrs, profile plate complete with necessary fixing screws etc. on wall / partition Complete with the wiring from DB using 3Cx04sqmm ZHFRLS insulated copper conductor flexible cable with all acessories(Max.of 4 to 6 sets shall be looped)

First worktable outlet Wiring from DB to First Switch socket outlet. Cost to include Switch socket outlet, GI Box etc.

Secondary worktable outlet Including Wiring from Power to power point

Supply & Laying [additional as approved] Supply & Laying of 3*1C*2.5sqmm ZHFRLS insulated Copper conductor flexible wire/cable laid in 25mm SFT-PVC conduits fixed to ceiling by means of saddles, spacers etc. Cost to include all acessories

Supply & Laying [additional as approved] Supply & Laying of 3*1C*1.5sqmm ZHFRLS insulated Copper conductor flexible wire/cable laid in 25mm SFT-PVC conduits fixed to ceiling by means of saddles, spacers etc. Cost to include all acessories

Supply & Laying [additional as approved] Supply & Laying of 3C*2.5sqmm ZHFRLS insulated Copper conductor flexible cable laid in 25mm SFT-PVC conduits fixed to ceiling by means of saddles, spacers etc. / already laid raceways Cost to include all acessories

Supply, installation,testing commissioing Following wiring acessories complete with concealead / surface mount GI/PVC back box, fixing acessories, profile plate, modular type switch/ sockets/ indiactors etc.

RG6 TV Outlet

1 No. USB type socket outlet

2 Nos. USB type socket outlet

LIGHTING FIXTURES :

Supply, storing, Installation Testing & Commissioning Complete with ncessary wall/ ceiling supports, flexible cable drops, ceiling roses, etc. CRI Shall be more than 80 Cost to include reciveing, storing and handling cahrges [All Sample shall be approved prior to procurement]

LED Based Light Fixture [For 600*600 Grid Ceiling] [Ref.: Thorn/Troll -32WAR] "1* 32W / [4*8W] LED Based Light fixture suitable to mount in 600*600mm Grid ceiling with electronic gear/ driving unit to produce day light effect Fixture shall have following characteristics: Finish: Powder coated with high reflective/Prismatic reflectors Min. Lumen Outpet : 5800/CCT:>5500K"

LED Based Downcan Light Fixture "Following LED Based Light fixture suitable to mount on modular/False ceiling with electronic gear/ driving unit to produce day light effect The Rim shall be circular/Square with powder coated finsh with mounting support. Fixture shall have following characteristics. Finish: Powder coated with high reflective reflectors/ CCT: >5000K and CRI > 87% [Sample shall be approved prior to procurement]"

[Ref.: Thorn/Troll- DLT0AMRDRD-12] 15W LED Based Deep recessed type Downlight

[Ref.: Thorn/Troll- ARDLTOF75DRM] 12/15W LED Based Rimless recessed type Downlight

[Ref.: Thorn/Troll- ARDLTOF10DRM] 10/12W LED Based Deep recessed type Downlight

[Ref.: Thorn/Troll- ARMATRIX-22] 18/20W LED Based recessed type adjustable Spot/ Wall wash /Down light

[Ref.: Thorn/Troll- SURF-1.0] 1x15W LED Based Square Rim spot light Fixture

[Ref.: Thorn/Troll- SURF-2.0] 2x15W LED Based Square Rim spot light Fixture

[Ref.: Thorn/Troll- DLT0AMSQ-15] 15W LED Based Square rim Recess/ surafce mounted Light Fxitures

LED Based Functional Light Fixture "Following LED Based Functional Light fixture suitable to mount on modular/False ceiling with electronic gear/ driving unit to produce day light effect The Rim shall be circular/Square with powder coated finsh with mounting support. Fixture shall have following characteristics. Finish: Powder coated with high reflective reflectors with CRI > 87% [Sample shall be approved prior to procurement]"

[Ref.: Dignity/ Thorn-Troll-1.7] 1700mm Dia Hanging Light fixture

[Ref.: Dignity/ Thorn-Troll-1.2] 900/1200mm Dia Hanging Light fixture

[Ref.: Dignity/ Thorn-Troll-0.9] 300/600mm Dia Hanging Light fixture

LED Based Track/Suspended Light Fixture "Following LED Based Track/Suspended Light fixture suitable to mount on modular/False ceiling with electronic gear/ driving unit to produce day light effect with CRI > 87% [Sample shall be approved prior to procurement]"

[Ref.: Thorn/Troll- iTrack] 1000/1200mm Track [ For Track mount Light fixture]

[Ref.: Thorn/Troll- iTrack-LED] 15/18W LED Lights suitable for mounting on tracks

[Ref.: Thorn/Troll- Surf Can] "15/18W LED Surface mount Down light with sturdy hanging support [Support Height Min. 1.5Mtrs]"

[Ref.: Thorn/Troll- Surf Can2] 25/30W LED Surface mount Down light with sturdy hanging support [Support Height Min. 1.5Mtrs]

[Ref.: Thorn/Troll- STB-FAB or Equivalent] "150W/SQMTR [Min. design ]-Lights for Stretch Fabric Ceiling [As per design/ shape] - Light Fixture & Fabric"

Channel Type Fixtures [Ref.: Thorn/Troll- CHN-iCONT] 36/32W [1200*75/100mm] LED BASED channel type fixture with all mounting acessories, ballst lamps etc. Suitable for continoues mounting with seamless connector as per site.The cost to include supply and installation of 2 nos. - 1/1.5Mtrs supports, 4 nos. Mounting hooks, connecting wires, connector and all acessories

Channel Type Fixtures [Ref.: Thorn/Troll- CHN-iCONT-150] 34/40W [1200*100/150mm] LED BASED channel type fixture with all mounting acessories, ballst lamps etc. Suitable for continoues mounting with seamless connector.The cost to include supply and installation of 2 nos. - 1/1.5Mtrs supports, 4 nos. Mounting hooks, connecting wires, connector and all acessories

Designer Channel Type Fixtures [Designer shape Fixtures] 25/40/50mm Width LED BASED channel / Linear type fixture with all mounting acessories, ballst lamps etc. Suitable for continoues mounting with seamless connector. The fixture shall be have designer shape as per the drawing including all drivers, connectors, site assembly, connecting wires, connector and all acessories

LED Batten [Ref.: Thorn/Troll- BTN] 20/24W LED based batten type light fixture with all acessories, drivers and all mounting acessories

Motion/Occupancy Sensor [Ref.: Zen/ Legrand/Philips] PIR/RF +Photocell based motion/occupancy sensor to control Light/AC with by-pass arrangenent and all acessories [Range - approx.ø6m at 2.4m ceiling height.]

LED String 4.8/5W per Meter LED string with Gearbox and controlling units with repeaters, power packs,mounting acessories etc. with profile Light string shall be suitable for continoues mounting with back mounting profile as required.

LED Profile Fixture 7.5/10W per Meter LED Slim Profile fixture with Gearbox and controlling units with power packs,mounting acessories etc. Light string shall be suitable for continoues mounting with back mounting profile to suite the Curve ceilings as required. Driver shall support minimum 20 Mtrs length of LED string [Fixture width shall be 20mm width/ as per site]

Decorative Light fixture with min. rate Rs.4,500.00

Decorative Light fixture with min. rate Rs.7,500.00

Decorative Light fixture with min. rate Rs.85,000.00

EARTHING SYSTEM :

Test Terminal Boxes Supply, Installation, testing & commissioning Supply, Installation & testing of test terminal block with Cu strip with test-link in 12"x12"x10" polyester/weatherproof box, having view-window with glass/plex-glass etc. complete with insulator bases, nut bolts etc.

Main Earth Stations (Type 2) Providing Chmeical based safe earth stations comprising of 3 M long 40 mm dia copper pipe electrode, with special conducting compound, & backfilling compound, etc. Soil resistingly test shall be conducted of the area where earth pits are to be located. [UPS, Servers]

Earth Conductors Supply, Installation, Earth grade soft drawn GI/copper conductors including all fixing hardware, brass screws, copper sockets, ferrules, brass nuts & bolts. All equipment motors, DB’s, panels to be connected on both ends (double earthing) with suitable strip / wires. Earth conductor Jointing by rivetting and brazing after rivetting in case of copper and welding / bolting in case of GI earthing.

50 * 6 mm GI tape

32 * 6 mm GI tape

25 * 5 mm GI tape

8 SWG GI wire

70 sqmm PVC insulated copper wire in 40 mm conduit

50 sqmm PVC insulated copper wire in 40 mm conduit

25 sqmm PVC insulated copper wire in 25 mm conduit

16 sqmm PVC insulated copper wire in 20 mm conduit

06 sqmm PVC insulated copper wire in 20 mm conduit

CONSTRUCTION PERIOD WORKS

Construction period electrification and Lighting works "Providing of Construction period Electricfication work including Lighing arrangement, Power socket outlets as required for apprx.80,000sqft area. Vendor shall provide minimum 80 Nos. Of LED Batten fixtures, (Min.200Lux)along with DB's with ELECB Protection. All the Plug Outlets shall be fixed properly with backboxes etc. Each Floor Shall have separate DB's Contractor shall make avail of one trained electrician , round the clock on site Drawings/records-Preparation of all records, drawings and submitting all ""As BUILT"" documentation to Client."

[ Further contractor is responsible to maintain the entire installation in good working conditions till the job is completed / handed over to the owners. The necessary material required to complete the job and to maintain the same is solely responsibility of the contractor. The contractor has to cooperate with all other agencies and maintain the installation and provide necessary temporary power to all other bidders. All complete as required and as per the final direction and approval of the Architect / Consultant. ]

MISCELLANEOUS WORKS :

Supply, Installation Including T's, bends fixing hardware and necessary acessories

20 mm SFT-PVC RIGID conduit

25 mm SFT-PVC RIGID conduit

25 mm SFT -PVC Flexible conduit

40 mm SFT-PVC Flexible conduit

Back box for DATA outlets Providing of MS/PVC back box suitable to fix DATA outlets as per finalised venosrs samples. Box Shall be fixed in concealed/Surface mounted as per direction on site

PVC back box for mounting sockets/switches- 2 module

PVC back box for mounting sockets/switches- 3 module

Supply and fixing Approved "Shock Treatment Charts " written in English and local language. These charts shall be framed in teak wood frame and covered with glass.

Supply and fixing Danger Boards of approved shape and size as specified by local Electricity Authorities written in English & Local Languages.

Supply and fixing 1000 mm wide rubber matting of 1.1KV grade as per electricity rules, [As per latest IS code]

Providing & fixing - Fire retardant sealant as approved Fire retardant sealant on wall / floors crossing as per specification. as per site condition inclusing OEM certificate

Supply & Installation Testing and commisisioning TV Socket Outlet Wiring using RG6 Co-axial cable laid in Rigid SFT PVC Conduit fixed to ceiling/underslide of slab/wall/partion. Complete with modular type TV socket outlet, acessories, fixing hardwares etc.

Supply, fabrication and installation of structural support Structural supports including welding, bolting, riveting, supply of necessary anchorbolts and grouting etc, supply of paint and applying one coat of anti rust primer and two finished epoxy coats including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, including all labour and materials as per approved drawings, directions of Engineer-in-Charge.(Any item weighting upto 1Kg or less shall neither be measured nor paid). This item shall be applicable for items other than mentioned above elsewhere in BOQ for panels, DBs & cable trays, etc.

Security & safety Work

FIRE DETECTION AND ALARM SYSTEM :

Supply, Installation, Testing, Commissioning and Integration with IBMS System Compitablity/Networking "Analogue Addressable type Main Fire Alarm Control Panel/System complete with 640 character LCD display, battery, battery charger Hooked Up with IBMS,TCP/IP protocol, Networked to PA System Generate the report/alarm mail to authority Module connectivity for Graphic interface Power back up Power back up through SMF batteries for 24 Hrs in Normal Condition Min 2 Hours in Alarm Condition The FACP shall have provision of loop expansion, Approval/Listing Panel shall be 9th edition UL Listed(latest edition) / FM Approved / EN Approved Inclusive of BMS Integration Modbus/Bacnet Card. The panel should be capable of catering to " 150 devices and 150 Detectors per loop, 06 Loop Panel [Expandable upto 10 loops] Works to be carried out by a Class A Licensed Contracting Agency only

Supply, Installation, Testing, Commissioning Repeater panel with 640 character LCD display, keypad etc.

Supply, Installation, Testing, Commissioning Graphical User interface of FDA system loaded on workstation as recommended by the OEM

Supply, Installation, Testing and Commissioning Alarm initiating/Monitoring devices with mounting back boxes, end terminals etc. Complete with acessories, and addressable base etc.

Smoke Detector 1 Analouge Addressable Intellegent Optical smoke detector with base

Smoke Detector 2 Analouge Addressable Intellegent multicriteria/Multisensor smoke detector with base

Heat Detector Analouge Addressable Intellegent rate of raise/ heat detector

Monitor Module Monitor Module complete with , mounting box, glands, lugs, etc. as required complete in all respects[UPS, Fire Switch]

Control Module Control Module complete with , mounting box, glands, lugs, etc. as required complete in all respects [PAC/UPS/Access/Fire Dampers]

Mannual Call Station Analouge adressable manual lever type pull station

MCP Covers UL Listed Dome Polycarbonate Transparent Covers for the Manual Call Points Flush mount UL/cUL Listed No. S2466, LPCB

Supply, Installation, Testing and Commissioning Fault isolators/Short Circuit Isolator

Supply, Installation, Testing and Commissioning Ceiling mount hooter cum strobe (90dB - 125bB) UL Listed/approved with addressable base, control module & power unit

Supply, Installation, Testing and Commissioning Response indicator with single/Double LED indicator

Supply, Laying, 2C x 16AWG, Stranded Copper conductor,Type A ST1 PVC insulated,Al Lylar Sheathed,twisted Pair, Annealed Tin, Armoured FRLSH Cable 650 V as per IS 1554, with GI saddle spacers every 0.3 mtr with double compression Cable Glands, ABS Junction Boxes (wherever required), terminals, Ferruling complete including chipping on wall, finishing and closing with sealent in wherever cabin crossings etc. [Outer sheath of the cable shall have RED color code as approved]

PA/MUSIC SYSTEM

Supply, Laying, "2C x 18AWG, Stranded Copper conductor,Type A ST1 PVC insulated Al Lylar Sheathed,twisted Pair, Annealed Tin, Armoured FRLSH Cable 650 V as per IS 1554, with GI saddle spacers every 0.3 mtr with Single compression Cable Glands, ABS Junction Boxes (wherever required), terminals, Ferruling complete including chipping on wall, finishing and closing with sealent in wherever cabin crossings [Outer sheath of the cable shall have Black color code as approved]"

Supply, Installation, Testing and Commissioning Ceiling Mount Speakers 6 W Ceiling speakers with line matching transformer with setting and connectors for volume controllers etc. having metallic grill finish - EN Approved

Supply, Installation, MS powder coated finish Enclosure to house above speaker units as per site requirment with all acessories, fixing hardware

Supply, Installation, Testing and Commissioning "Digital Network controller - EN Approved with following features 08/12 Zone Microprocessor based Builtin Front Panel Fireman Microphone for emergency announcements MODBUS/IP or BACNET/IP Port for 3rd Party IBMS System Integration Accomodates 8 set of Amplifiers/ zones 2 Channel Operation for Simultaneous Evac & Alert Audio message broadcast 100% Redundancy in amplifier, Automatic Backup Switchover in case of failure of Maiin Amplifier 2 Music Inputs & Fireman Microphone Accomadates 19 Zone Call stations and / Or IP/Ethernet Port for Configuration & Audio decoding With all interconnecting Cables,rack mounted Complete with Booster/Network Amplifier etc."

Supply, Installation, Testing and Commissioning Interconnectivity between FDA System and PA/Music sytem with all necessary hardware, contro module, extension cabling etc.

Supply, Laying, Testing and Commissioning CAT 6 armoued cablw with all fixing hardware, junction box, with all acessories

CCTV NETWORK [IP BASED]

Supply, Installation, Testing and Commissioning True day & Night IR mini dome camera in rugged enclosuer with 1/3" CMOS, 4M Pixel, 2.7–12 mm WDR MFZ, 50Mtr IR, PoE, H.264 with micro SD card slot for EDGE recording, with built in Motion Tamper and Audio Detection, ONVIF conformant, high-performance, 140dB WDR PoE ,IP 68, IK 10 SNR > 50 dB, -20 ºC to +50 ºC (Working enviornment)

Supply, Installation, Testing and Commissioning "Network Attached Video Server Cum Storage: Dual Xeon E5 Processor, RAM 16 GB or above, Total HDD Bay Support 32TB or Above, Format and Remove Disk HDD RAID 0, 1, 5, 6, 10, USB Interface USB 2.0 x2, USB 3.0 x1, Record Throughput (MB) > 200 Mbps, Network Throughput (MB) > 300 Mbps, Dual Network Interface 10/100/1000Mbps Ethernet (RJ-45) x 2 Protocols IPv4, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, SMTP, FTP, DHCP, NTP, DNS, DDNS, IP Filter Power Safety Certifications CE, LVD, FCC, VCCI, UL , Recording shall be for more than 30 days at Max Resolution with Windows/Linux Server OS 8 SATA SDD Slot ,Realtime Recording Resolution Vedndotr shall calculate and provide the SDD storage accordingly [Back up for 90 days]"

Software License CCTV Video Management Software Sever Base License

Software License CCTV Video Management Software Client License

Software License CCTV Video Management Camera Channel Licenses

Supply,Installation,Testing & Commissioning Client Workstation - With a minimum of E3-1240 v2 3.4GHz 8M, 2x16GB or more of RAM, TB Hard Drive for OS and VMS Applications, Windows 11, DVD/RW, and Dual 8GB NVIDIA graphic card with quad Monitors support in control room with different content possiblity on each of the monitor i.e Multiplexed, Alarm, Maps, sequence or any combination.

Supply, Installation, Testing and Commissioning Monitors Monitors to support above servers and desktop machines with all mounting acessories, cables, supporting OS having plug & play interface for 24x7 Operation

50"colour TFT/LED UHD monitor

24 port POE switch with 4SFP Gigabyte Uplinks

Supply, Installation, Testing and Commissioning 42U racks with power strips, mounting rakes, openable doors, automated ventilation fans, castor-wheels with digital lock system etc/.[Network Type]

Supply, Laying, Testing and Commissioning CAT 6a Armoured Cable cable fixed to underside of the slab/wall with all acessories, termination etc.

Supply, Laying, Testing and Commissioning GI Conduits - Heavy Grade with necessary fittings & mounting accessories

ACCESS CONTROL SYTEM

Supply, Installation, Testing, Commissioning and Integration with IBMS System Compitablity/Networking "32 Bit 4 Door Controller in Tamper proof enclosure with Power supply With all Required Accessories to Make the system Operational. Variable card formats supported.Multiple facility codes supported. Remote database administration Remote alarm monitoring. Inbuilt database backup to facilitate offline use. Local, Global, Soft, Hard Anti-pass back supported. Automatic locking & unlocking of the doors Approval/Listing- Panel shall be UL Listed/Apporved"

Supply, Installation, Testing, Commissioning and Integration with IBMS System Compitablity/Networking "32 Bit 4 Door Controller in Tamper proof enclosure with Power supply With all Required Accessories to Make the system Operational. Variable card formats supported.Multiple facility codes supported. Remote database administration Remote alarm monitoring. Inbuilt database backup to facilitate offline use. Local, Global, Soft, Hard Anti-pass back supported. Automatic locking & unlocking of the doors Approval/Listing- Panel shall be UL Listed/Apporved"

Supply, Installation, Testing and Commissioning

Smart Card Reader with Wi-Fi, BLE, Ethernet, RS-485/RS-232, POE & necessary mounting accessories

Finger Print and Card Reader with Wi-Fi, BLE, Ethernet, RS-485/RS-232, POE & necessary mounting accessories

Face reading and Smart Card Reader with Wi-Fi, BLE, Ethernet, RS-485/RS-232, POE & necessary mounting accessories - For Attendence

Blank Smart Cards with printing

Magnetic Door Contact for Door Status

Electromagnetic Door Lock with feedback (Double Leaf Door) -800lbs

Electromagnetic Door Lock with feedback (Single Leaf Door) - 1200lbs for safety doors

Egress Switch/Emergency Push Button

Panic Bar for Fire Exit Door with local buzzer with I/L with FDA

Emergency Exit Switch/ Break glass unit

Local Buzzer for Door open/close delay alarm with all acessories

Supply, Installation, Testing and Commissioning Enterprise version access control system server software with AD integration feasibility / password complexity / Customisation of reports, Anti-passback, Time & Attendance feature, Trace card feature / Alarms, FAS integration with ACS / Transient profile, Card life cycle / card history reports, Automatic card deactivation in case of not being swiped for certain days, Multiple levels to the same user, Access log report, Access denied report, Integrated with the CCTV System, VAPT Certified Software, Visitor management module with camera & badge printer (Paper), import tool (import cardholder & credential data)

Canteen management system to be intergation with card access / attendancesoftware

Supply, Installation, Testing and Commissioning Supply, installing, testing & commissioning of 12th Generation Intel core i7 processor, 500GB SDD, 8 GB DDR RAM, DVD Drive (Reads and Writes DVD) PC with 18" TFT monitor, key board & mouse having Original OS , MS Office Software for ACS & CCTV Software

Supply, Installation, Testing and Commissioning Visitor management System [Vendor - 9821038710] Visitor management KIOSK with touch screen Tab (Latest version) with HD Camera Neworking compitable with alarm generating system. Kisok shall be plug & play & mobile type Kiosk shall generate and patch the vistor details through mobile phones SMS, generate digital photo ID, visitior pass, QR code compitable with managed access control etc. Kisok shall also sense of human body tempetrature, face detection etc. System shall integrate with access control software and generate report and day-wise data base. System shall be compitable to store and archive min. 1,00,000 pax/ visitor data per year. System shall generate e-pass through archived log for repeated visitors on face ID/ mobile no/ e-visiting card etc.

Supply, Laying,Testing High quality, AB Copper Cable,PVC insulated, dual shielded PVC Sheathed laid with G.I Saddles at 0.3mtr in below conduit.

8c x 24AWG cable for cable length upto 25 8c x 20AWG cable for cable length upto 70 8c x 16AWG cable for cable length >70mtrs"

"4c x 20AWG cable for cable length upto 70 4c x 16AWG cable for cable length >70mtrs"

2c x 16AWG cable for cable length.

Supply, Laying, Testing and Commissioning 25 mm Medium Grade GI Conduits with ,fittings ISI Marked

Supply, Installation GI Perforated Cable trays -100x 35

Supply, Installation GI Perforated Cable trays -200x 35

RODENT REPELLENT SYSTEM [HUB ROOMS]

Supply, Installation, Testing and Commissioning Ultrasonic pest repellers - 24 Satellite model with all acessories The cost should include controller to be netwrokable with RS-485.

Supply, Installation, Ultrasonic Rodent Transducers- For Hub room & DATA Center - 500sqft

Supply, Laying, 2C x 18AWG, Stranded Copper conductor,Type A ST1 PVC insulated, Al Lylar Sheathed,twisted Pair, Annealed Tin, Armoured FRLSH Cable 650 V Ferruling complete including chipping on wall, finishing and closing with sealent in wherever cabin/room crossings as per IS 1554, with GI saddle spacers every 0.3 mtr with Single compression Cable Glands, ABS Junction Boxes (wherever required), terminals,

Networking System

DATA NETWORK :

Supply & Laying Cat6 cables CAT6, 4 Pair UTP, LSZH cable through existing PVC conduits/underfloor trunking etc. Cable Jacket Colour - Data - White / Voice-Grey ( Each Box of 305 Rmts or 1000ft )

Supply & Installation including termination Following I/O outlets including I/O's, profile plates. Back box, fixing hardware etc. [I/O Shall be with dust cover/auto shut cover] [Colour Coding - Blue-Active, Green - Redundunt/Voice]

Quadrex Face plate with 3 nos. of CAT6 I / O

Duplex Face plate with 2 nos. of CAT6 I / O

Singlex Face plate with 1 nos. of CAT6 I / O

Supply & Installation Following patch cords

2 Mtr Mounting / Patch cord[Blue/Yellow/Grey] ( CAT6 )

1 Mtr Mounting / Patch cord[Blue, Yellow,Green] ( CAT6 )

Supply & Installation Following Jack Panels

24 port jack panel/ 1U Type/Loaded ( CAT6 )

24 port jack panel/ 1U Type/Loaded /Angular-Option( CAT6 )

Supply, Installation, Testing & commissioning 200[200+200] pair MDF box with diconnecting type telephone tag block and all acessories

Supply, Installation, Testing & commissioning Rack Mountable type IDF suitable for 100+100 pair with diconnecting type telephone tag block and all acessories

Supply, Installation, Testing & commissioning 42U Closed Type rack with ladder set, Powerdistribution unit verticla wire manager and horizontal wire manager etc. with all floor [Network rack] mounting acessories, tag blocks, power strips, square nuts etc.Complete with digital lock & pad lock arrangement [Ref.: Legrand/Valrack, Presdient-AP]

Supply, Installation, Testing & commissioning 45U Closed Type rack with ladder set, Powerdistribution unit verticla wire manager and horizontal wire manager etc. with all [Server Rack] mounting acessories, tag blocks, power strips, square nuts etc. Complete with digital lock & pad lock arrangement & 4 nos. trays [Ref.: Legrand/Valrack, Presdient-AP]

Supply & laying 100 pair un-armoured riser cable with all fixing acessories, acessories and termination

Supply & Fixing Hook Up wire

Supply & Laying 12 Core MM OM3 Outdoor type Fiber Optic Cable(10gbps)

Supply, installation testing & commissioning Following FO system devices with all acessories, hardware etc. Cost to include all mounting brackets, nuts, screws etc.

24 Port LIU Loaded with LC Coupler -[12 port loaded LIU]

1U Front Faceplate, unpopulated, accepts 24 duplex LC adapters[600G2]

RoloSplice Kit with 2 fusion splice trays

LazrSPEED® LC Duplex Adapter, Aqua, Single Pack

OM3 LC Pigtel MM 1 Mtrs

SLC to LC Duplex Fiber Patch Cord MM

Testing & Certification charges. Product certification shall be for 25years

PHE System Including Internal Toilet

SANITARY FIXTURES & FITTINGS:

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [Wall Hung EWC]" Providing and fixing EWC wall hung type with trap, approved make. PVC seat and lid with chromium plated brass hinges rubber buffer including 32mm C.P. flushvalve, 32mm dia. uPVC Water pipe from flush valve to watercloset complete.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [Wall Hung EWC]" Providing and fixing EWC wall hung type with trap, approved make. PVC seat and lid with chromium plated brass hinges rubber buffer including 32mm C.P. flushvalve, 32mm dia. uPVC Water pipe from flush valve to watercloset complete.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [Wash basin]" Providing and fixing White glazed vitreous Square/Oval shaped, 21" by 18" washbasin,with grid drain, 1/2" angle stop valve in polished , washbasin,with grid drain, 1/2" angle stop valve in polished chrome,flexible connection, touchless sensor operated, AC/DC powered,cold only lavatory faucet in polished chrome , escutcheon plate, 300 mm horizontal, 200 mm vertical, trap, model and make as specified in the list of makes, Includes cutting and making good the walls/ floors wherever necesssary with all fittings & accessories required for installation all complete as per drawing/specifications and as directed by the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [Wash basin]" Providing and fixing White glazed vitreous Square/Oval shaped, 21" by 18" washbasin,with grid drain, 1/2" angle stop valve in polished , washbasin,with grid drain, 1/2" angle stop valve in polished chrome,flexible connection, touchless sensor operated, AC/DC powered,cold only lavatory faucet in polished chrome , escutcheon plate, 300 mm horizontal, 200 mm vertical, trap, model and make as specified in the list of makes, Includes cutting and making good the walls/ floors wherever necesssary with all fittings & accessories required for installation all complete as per drawing/specifications and as directed by the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [Sensor Urinals]" Providing and fixing white vitreous sensor Urinal with top inlet,urinal sensor in polished chrome with battery operated automatic valve,with chrome plated valve of make as per specifications including all accessories & fittings required for installation with necessary pipe fittings of required length and approved make, suitable brackets & rag bolts complete as per drawings,specifications & as directed by the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [Sensor Urinals]" Providing and fixing white vitreous sensor Urinal with top inlet,urinal sensor in polished chrome with battery operated automatic valve,with chrome plated valve of make as per specifications including all accessories & fittings required for installation with necessary pipe fittings of required length and approved make, suitable brackets & rag bolts complete as per drawings,specifications & as directed by the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [Health faucet]" Providing and fixing CP brass health faucet white, with 12.5 mm flexible pipe and 1/2" angle shut off valve in polished chrome with wall hook of model make as specified in list of makes all complete including all accessories & fittings required for installation as per specifications, drawings & as directed by the Architect/client etc. comp

"Supply, Receiving, Storing,Handling, fixing [Toilet paper Holder]" Providing and fixing in position CP brass toilet paper holder with all accessories & fittings of model and make as specified in list of makes etc all complete as per specifications & as directed by the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing [Hand drier]" Providing and fixing in position electrically operated ABS hand drier of model and make as specified in list of makes or equivalent all complete as per specifications drawing & as directed by the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing [Hand drier]" Providing and fixing in position electrically operated Dyson Airblade 9kJ HU03 Hand dryer of model and make as specified in list of makes or equivalent all complete as per specifications drawing & as directed by the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [EWC, wall hung Basin, & all accessory - Handicap toilet]" Providing and fixing in position handicapped toilet fixtures consisting of EWC with cistern, washbasin, grab bars, etc.,of approved make with all accessories & fittings. The quote shall include for the grab rail & hinged rail as per design & specification and as directed by Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing [Soap Dispenser]" Providing and fixing in position soap dispenser ABS Bodywhite colour,wall mounted,1000 ml capacity,manual push button type soap dispensar with all necessary fixing required for installation with SS screws and clamps etc.as per drawings, specifications & to the approval of the Architect/client etc. comp.

"Supply, Receiving, Storing,Handling, fixing , testing & commissioning [EWC - Pantry Sink]" Providing and fixing in position Pantry Sink, rectangular, SS 304 stainless steel, 21" by 18" ,10" deep kitchen dishwasher sink with polished chrome pillar faucet, along with all accessories & fittings required for installation all complete as per specifications, drawings & as directed by the Architect/client etc. comp.

Supply & Installation Testing and commisisioning 06Ltrs On-line water heater / Geyser with safety valve, Auto-cut off Adjustable thermostat setting etc. Ready for Plug & play use with all Cost to include inlet & outlet valves as required

Supply & Installation Testing and commisisioning Hot & Cold Mixer unit with all mounting acessories, fixing hardware as required Complete with the extension piece,cover plate etc.

Supply & Installation Testing and commisisioning Intermediate water collection tank to be installed below wash basin fabricated with SS304 material. Complete with Openabale Hinged top cover, water inlet and outlet connection with drain line and valve. System shall be designed as per site condition. Min. size 3000mmx600mm(D)x600mm(H) with perforated seperator to separate the gold dust from waste water. Complete with all fixing hardware, mounting acessories etc.

INTERNAL & VERTICAL DOWNTAKE DRAINAGE (SOIL, WASTE AND VENT WATER PIPES & FITTINGS)

"Providing fixing, testing and commissioning (Inside Toilet Area)" Providing fixing, testing and commissioning in position 3 Rmt SWR PVC PIPE TYPE-B(6Kg/cm2.) self fit pipe comforming to IS:13592 including all fittings such as bends, junctions, inspection doors, offests, cowl, access pieces/plugs, including all vertical supports

110 mm dia.

75 mm dia.

32 mm dia.

"Supply, Receiving, Storing,Handling, fixing [Nahni trap/ Floor trap]" Providing & fixing SS Nahni trap/ Floor trap of 75mm dia diameter, with necessary distance piece of 75mm dia pipe and 150x150mm SS grating fo chilly make, making necessary SLAB /WALLholes and cutting walls, etc complete. (Supreme/ Finolex/ Prince/ Astral Makes)

"Supply, Receiving, Storing,Handling, fixing [Floor Clean out]" Providing & fixing SS Floor Clean out of 75mm dia diameter, with necessary distance piece of 75mm dia pipe and SS grating as option making necessary SLAB /WALLholes and cutting walls, etc complete. (Supreme/ Finolex/ Prince/ Astral Makes)

INTERNAL WATER SUPPLY WORK

Providing fixing, testing and commissioning [Domestic/ Flushing Water Supply:-(Internal)] Providing, laying, testing and commissioning of CPVC pipes, suitable for domestic water application for cold & hot water sypply, conforming to CTS (copper tube size) SDR-11 as per ASTM D 2846 with necessary fittings up to the size of 50 mm dia ,( Beyond 65 mm Sch 40)

15 mm dia

20 mm dia

25 mm dia

32 mm dia

UPS System

UPS Units :

"Supply,Installation, Testing & commissioing of 60KVA=Kw Modular Type on-line UPS Unit (80KVA Frame) (3phase-3phase) with 30 Mins. Backup thru' battery bank 3Nos. Modules of 20KVA Each To be operated in standalone operating mode And shall have all external communication feasibility. Rate to include all the necessary cabling between UPS unit Battery bank, mounting acessories etc. UPS shall support 150% Loading for More than one minute UPS shall be with Transformer-less Technology .Complete with sealed maintenance free Valve Regulated Lead Acid (SMF-VRLA) The batteries shall be vertical mounting type with suitable accessories. Including cabling between battery bank and UPS Units with isolatos/MCB in enclosure Cost of battery bank with Semi-CLOSED type rack All the battery terminals shall have caps/covers System shall be with Live/ On-line swapbale modules [Battery Banks with 2 strings]" Note : Unynivin Copper conductor flexible Power Cabling between UPS to Battery banks shall be included. Quantity of cables should be as per site conditions and should include steel reinforced PVC flexible conduits or Raceways with cover

Supply,Installation, Testing & commissioing of 1*10 KVA Lighting Inverter unit (1phase-1phase) with 30Min. Backup thru' battery bank (Overall) To be operated in stand alone mode And shall have all external communication feasibility. Rate to include all the necessary cabling between UPS unit Battery bank, mounting acessories etc.

Supply & installation of 300mm (Max) High stand for above all UPS units battery banks to match the level of false flooring in UPS room. Rack shall be customised as per site condition and duly treated for rust proofing etc. Vendor shall also provide load-balnacing calculation for floor/slab sterngthening through Charted structral engineer [For Above mentioned UPS Units]

HVAC Work

VRF SYSTEM

SUPPLY OF HIGH SIDE VRF SYSTEM INDOOR UNITS OF VRF SYSTEM FLOOR MOUNTED / WALL MOUNTED / CONCEALED / DUCTABLE/CASSETTE TYPE INDOOR UNITS Supply, installation, testing & commissioning Supply,Installation,Testing & Commissioning of Hi Wall mounted type / Ceiling mounted Cassette /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel & resin net filter with Mold resistance (including ducted units). The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket & insulation for fitting. All units shall be suppled with minimum 3 speed control fan motors from the remote controllers Note: Actual Capacity to be as per Outside DB - 40°C , Inside DB - 23°C

2.0 TR Hi static ceiling suspended ducted unit (Including cordless remote controller)

3.0 TR Hi static ceiling suspended ducted unit (Including cordless remote controller)

OUTDOOR UNITS OF VRF SYSTEM Supply, installation, testing & commissioning Supply,Installation,Testing & Commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors & separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube & Plate type Al. Fins of Multi Row, Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor & Outdoor units. All coils and accessories exposed shall be protected with Bygold or equivalent anti corrosion coating having minimum 2 years leakage warranty. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector & Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection.The cost of ELCB should be included. ( It should include all cost related to Lifting, Shifting of Equipments to the desired location and cost of Supporting M. S structure, duly painted with 2 coats of epoxy paint required for installation of the equipment at site, catwalk for maintenance, safety railing and hooks. ) Note: Actual Capacity to be as per Outside DB - 40°C , Inside DB - 23°C

18 HP Capacity

CENTRAL CONTROLLER Supply, installation, testing & commissioning Central Controller for entire system with LCD touch screen for control upto 128 units with all accessories/kits etc (Quote with Touch Screen Controller)

BRANCH DISTRIBUTION JOINTS FOR REFRIGENT PIPING. Supply, installation, testing & commissioning Supply of Imported Branch Distribution Joints for VRF system.

LOWSIDE VRF WORKS Installation, testing & commissioning Installation, testing and commissioning of air cooled variable refrigerant volume modular type air conditioning system suitable for 415 ± 10% or 230 ± 5% volts, 50 cycles. The unit shall consist of indoor units and external condensing units, complete in all respects, with accessories and earthing. FLOOR MOUNTED / WALL MOUNTED / CONCEALED / DUCTABLE/CASSETTE TYPE INDOOR UNITS

2.0 TR Hi static ceiling suspended ducted unit (Including cordless remote controller)

3.0 TR Hi static ceiling suspended ducted unit (Including cordless remote controller)

Installation, testing & commissioning Installation, testing and Commissioning of Outdoor unit as described above of following capacities. It should include all cost related to Lifting, Shifting of Equipments to the desired location and cost of Supporting M. S structure, duly painted with 2 coats of epoxy paint required for installation of the equipment at site, catwalk for maintenance, safety railing and hooks. Vendor to vist site and access the location of Outdoor unit for supporting, for adequacy as per equipment sizes, maintenance and operation point. 18 HP Capacity

Installation, testing & commissioning Installation, Testing and commissioning of Imported fittings Y-joints

Supply, installation, testing & commissioning Supply,Installation,Testing and Commissioning of the following sizes of seam less and eddy current tested Hard drawn Copper insulated Refrigerant piping.The insulation shall be Closed cell elastomeric Nitrile Rubber backed by factory supplied Aluminium Foil in sleeve form OR Chemically crosslinked polyolefin XLPE foam with reinforced alupet foil facing with Class 0 fire properties. The insulation shall be class 'O' The refrigerant piping shall be include of all couplings and elblow etc.. 18G GI clamps and 6 mm screws shall be used for fixing of copper tubes. pvc sleeves to be provided wherever the copper tubes passing through walls.The Ref.Piping shall be pressure tested at 550 PSIG with nitrogen. The Refrigerant Piping shall be run over perforated type GI trays supported at 1.2M distsnce. Acytelene gas shall be used for brazing and low pressure nitrogen passed through pipes to remove carbon deposits inside pipes. Scaffolding shall be done in the shafts as required.( Vendor to include cost also if required at site). The outdoor units will be placed on the Terrace Tenderers to visit site and access the location for adequacy also calculate the ref. ppg scheme and reconfirm the piping quantities. The length of piping mentioned is in bunch of suction and liquid piping. i.e. 01 Rmt length of pipe equals one pipe of suction pipe and one pipe of discharge pipe run. The piping to be duly insulated with 19mm thick closed cell for suction and 13mm thick for discharge using closed cell elastomeric nitrile rubber insulation ( Class O ) with reinforced Aluminium foil facing OR thick Chemically crosslinked polyolefin XLPE foam with reinforced alupet foil facing with Class 0 fire properties. All insulation to be provided with a UV protection paint.The vendors to size the refrigerant piping based on the outputs from the OEM softwares. Piping should be laid on perforated type trays including clamping and GSS enclosure covers for trays in the shafts and on the outdoor.

Supply, installation, testing & commissioning Nitrogen pressure testing, vacuumisation, gas charging of the entire system as per OEM specified procedure. 18 HP Capacity

Supply, installation, testing & commissioning Refrigerant Gas and oil charging as per OEM approved gas qty and prior approval from client or his representative 18 HP Capacity

Supply, installation, testing & commissioning Shielded Armoured copper Control Cable ( 3C X 1.5 SQMM ) in Rigid PVC conduits

Supply, installation, testing & commissioning Flexible copper Power Cable ( 3C X 1.5 SQMM ) for indoor units in flexble conduits

Supply, installation, testing & commissioning Power Cable from power point to Outdoou unit ( 4C X 10 SQMM ) Armoured copper alongwith termination and dressing

Supply, installation, testing & commissioning Providing and fixing rigid UPVC Condensate Drain piping complete with fittings, supports and floor trap as per specifications and duly insulated with 6 mm thick closed cell insulation.

40 mm dia pipes

32 mm dia pipes

25 mm dia pipes

AIR DISTRIBUTION SYSTEM

Supply, Fabrication, installation and testing of Sheet metal ducts (FACTORY FABRICATED DUCTS IN BOXED TYPE CONSTRUCTION) with 35 mm flange in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods, anchor bolts, GI bolts & nuts, canvas connections , duct dampers & splitter dampers etc.,and as required by the specifications. Galvanizing shall be Class VII – light coating of zinc, nominal 180gm/sq.m surface area. All size duct should be with TDF ductmate joints. No C & Ss clip joints should be used. The cost should include duct leakage test for entire length of Main Ducts before applying thermal insulation (differential pressure)

24 gauge galvanised sheet steel

22 gauge galvanised sheet steel

20 gauge galvanised sheet steel

24 gauge galvanised sheet steel-Site Fabricated

22 gauge galvanised sheet steel-Site Fabricated

Supply, Fabrication, installation and testing of Sheet metal ducts (Elliptical Factory Fabricated Ducts) in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods , anchor bolts, GI bolts & nuts, canvas connections , duct dampers & splitter dampers etc.,and as required by the specifications. Galvanizing shall be Class VII – light coating of zinc, nominal 180gm/sq.m surface area.All size duct should be with ductmate joints.

24 gauge galvanized sheet steel

22 gauge galvanized sheet steel

Supply, Fabrication, installation and testing of Double skin G.I Plenum With 25 mm thick Puf INSULATION made of 20G G.I with necessary threaded rods for supporting & anchor fasten the of following sizes.

Supply, Fabrication, installation and testing of Rectangular Duct Silencers for Supply and Return Air Ducts:Silencers made out of GSS steel with acoustic fills of density of not less than 48 Kg/cum. complete with heavy duty terminal flanges. The joints shall be sealed using duct sealing compound. The attenutors shall be of varied sizes and capble of reduction in noise levels upto 12dbA with 900 mm in length & as per specifications

Supply, Fabrication, installation and testing of GSS Volume Control Dampers with operating handle for Supply air duct branches in accordance with the approved shop drawings and specifications.

SITC Supply installation testing and commissioning of motorised zero leakage type Aluminium damper for HUB room and server room FCU unit outlet along with suitable 230V ON-OFF type actuator with spring return mechanism. All wiring, control panels, termination etc to be considered

Supply, installation, testing and balancing of Powder coated Extruded Aluminium Supply Air Diffusers with removable core , without Aluminium opposed blade volume control dampers in accordance with the approved shop drawings and specifications to fit in the tile size of 600 x 600. The neck size shall be of following sizes.The supply air dampers to be full tile diffusers of 450mm x 450mm neck size similar to the return air diffusers in next item. However the non active sections to be blanked off using black coloured sheets form above. This to be done so that the SA and the RA diffusers look alike in the false ceiling even though their neck sizes may be different. The billing to be done as per the following damper sizes only and not as per the neck size of 450 x 450

Supply, installation, testing and balancing of Powder coated Extruded Aluminium Return air diffusers with removable core, in accordance with the approved shop drawings and specifications to fit in the tile size of 600 x 600. The neck size shall be of following sizes 450 x 450

Supply, installation, testing and balancing Powder coated Extruded Aluminium Supply Circular Air Diffusers with removable core,collar damper, in accordance with the approved shop drawings and specifications. The neck size shall be of following sizes

Supply, installation, testing and balancing Powder coated Extruded Aluminium Return Circular Air Diffusers with removable core, in accordance with the approved shop drawings and specifications. The neck size shall be of following sizes

Supply, installation, testing & commissioning of Spill AIR Boxes made of 22G G.I with round neck with THERMAL INSULATION with 6mm thick XLPE /Nitrile foam including necessary threaded rods for supporting & anchor fasten the of following sizes.

Supply, Fabrication, installation and testing of the Insulated Flexible Ducting , with both side Aluminium foil complete with connecting rings, duct supports etc as per standards and specification.Note: Universal clamp should be provided to fix the flexible duct in the spigots and covered with tape. If the flexible duct length is beyond 1500 mm, then cirucar clip with chain to be provided to support the flexible duct with AL tape need to be provided alround the flexible, Butterfly damper & Mixing boxes connections.

Supply, installation, testing & commissioning of Spigot & Butterfly Dampers of the following sizes.

Supply & installation, testing and balancing of Supply & installation, testing and balancing of Al. Powder coated grille suitable for eliptical ducts with necessary flanges and collar dampers attached at all four sides for supply air of the following sizes. The grilles shall be in curved profile to match the profile of the eleiptical ducts'

Al grilles with 4 side flanges as per approved colour shade and degree of grille

Aluminium collar damper

Supply & installation , testing and balancing of Al. Powder Coated Slot Diffuser with necessary flanges for supply & return air of the following sizes.

2 slot diffuser, 20 mm each slot

3 slot diffuser, 20 mm each slot

Hit & Miss damper

Supply & installation , testing and balancing of Al. Louver for Fresh Air as per the sizes indicated in the drawing.

Supply, installation, testing and balancing of Extruded Al. powder coated Non-Vision louvers with both side flange for toilet doors as per specification & approved shop drawing

Supply, installation, testing & commissioning Supplying, installing, testing and commissioning of CABINET TYPE INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±10% volt single phase 50 cycles AC supply. Quoted price shall be inclusive of electronic speed regulator and wiring between fan & speed regulator for single phase fans. Incase of 3 phase fans quoted price shall be inclusive of DOL starter panel with cabling between starter panel and fan. The incoming power supply to speed regulator / starter panel shall be provided by electrical contractor. All Fresh air fans, as per layouts will have washable and removable pad type filters The fan shall have low sound level exceeding not more than 40 DBA at three metre distance.

2600 cfm and 25 mm ESP

1100 cfm and 20 mm ESP

600 cfm and 20 mm ESP

300 cfm and 20 mm ESP

150 cfm and 20 mm ESP

CONTROLS:

Supply, installation, testing Supply & laying of suitable armoured copper cabling from H2 sensor to PLC alongwith end termination

Supply, fabrication, installation and testing Flexible connections constructed of fire resistance flexible double canvas sleeve as per the approved shop drawings.

Supply, Installation, testing Commissioning GSS fire dampers with minimum 90 min fire rating UL listed and UL listed spring return type actuators OR Fusible links as specified in the approved shop drawings. The operation of fire dmapers shall be such that these shall switch ON and OFF along with the AHUs operation. All wiring in FRLS cables in metal conduits and accessories from AHU panel to individual fire dampers to be considered in scope of work and quoted accordingly. Potential free contacts to be provided for Fire Damper to get Open/Close Status Monitoring on the IBMS. Dampers should meet the UL-555 specificatiONS and stamped. Relevant certifications should be submitted.

Bare fire damper

Fire rated Actuator with control panel and fire/ temperature sensor spring return type complete with power/control wiring for above dampers

Supply, installation, testing and commissioning Pressure relief damper as per approved drawings and specifications.

Supply installation, testing & commissioning AXIAL FANS for fresh air & exhaust air suitable for installing in any position in Horizontal or vertical. The motor shall be suitable for 415 V + 10% volts three phase 50cycle, AC supply. The fan shall be equipped with mounting bracket inlet cone & outlet cone , anti vibration mounts etc required at discharge. The fan shall have low sound power level not exceeding 65dBA at three meter distance at both ends. To achieve these DB levels, sound attenuators of suitable length, at inlet & outlet of the fans must be included in the cost.

12000 CFM @ 20mm ESP / Class H motor / Ceiling Mounted

7000 CFM @ 20mm ESP / Class H motor / CeilingMounted

700 CFM @ 25mm ESP / Class H motor / CeilingMounted

Supply installation, testing & commissioning Supply of 18 G GSS sheet 180 GSM of size 8 feet x 4 feet. Installation along with cutout for fans, frame, supports, breaking and making good of walls and 2 coat epoxy paint

Supply, fabrication and installation of Structural supports including welding, bolting, riveting, supply of necessary anchorbolts and grouting etc, supply of paint and applying one coat of anti rust primer and two finished epoxy coats including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, including all labour and materials as per approved drawings, directions of Engineer-in-Charge.(Any item weighting upto 1Kg or less shall neither be measured nor paid). This item shall be applicable for items other than mentioned above elsewhere in BOQ for piping, ducting, equipment etc g

INSULATION

ACCOUSTIC INSULATION Supply, installation and testing Acoustic lining for supply & return air ducts with 10 mm thick Open Cell XLPE 32Kg/m3 Class "1" (OPEN CELL)as per the spec.

AHU/MECHANICAL PLANT ROOM Supply and installation Acoustic lining on walls in AHU/mechanical plant room/ AHU boxing with 25 MM THICK Open Cell XLPE 32 Kg/m3 Class "1" (OPEN CELL as per the approved shop drawings & specifications. (For details Technical specfication).

Supply & Installation 9 mm thick class 'O' INSUshield' non-fibrous, fire retardant (FR), closed cell, 32Kg/m3 density XLPE tri-dimensional chemically Cross Linked Polyethylene foam has been used for Duct Thermal insulation. The quoted price inclusive of adhesives cotton tapes, fixtures etc.,

Supply & Installation 9 mm thick class 'O' INSUshield' non-fibrous, fire retardant (FR), closed cell, 32Kg/m3 density XLPE with Al.Foil, tri-dimensional chemically Cross Linked Polyethylene foam has been used for Duct Thermal insulation. The quoted price inclusive of adhesives cotton tapes, fixtures etc.,

Supply, erection, testing Supply & Installation of Preinsulated PIR Panels complete HCFC Free with Kraft Paper on one side and 80 micron Embossed Aluminum on the other side and close cell not less than 95% Rigid Cellular foam insulation of 30mm thickness as specified and material shall be Class O as per BS 476 Part 6 & Part 7 with 2 hours fire rating and with Density of 46kg/m3 and should have Thermal Conductivity 0.021 W/mK , Water absorption shall be not more than 0.03% as per EN 13403 with GreenPro certified for Under deck Insulation. OEM approved low VOC adhesives to be used to stick the inslation boards and then to be screwed to slab with GI screws and washers.

Stack Parking

Car Parking Works - supply and installation of Hydraulic Twin Park, Comfort Oriented and Fully Automatic Systems, Low noise and exceedingly economical and safety features (17nos. of stack parking units )

Landscape works

Civil work

Providing and laying at all positions, approved quality Tile for flooring, square or rectangular in shape of up to 600mm width and fine joints as per prescribed pattern, with proper line, level and slope, including cement sand mortar 1:6, complete Basic Tile Rate Rs 100/Sqft

Wall Cladding Basic Rate Rs 100/Sqft

Soling

PCC 1:3:6 100mm thickness

Plaster in crush sand

RCC Site out with Smooth finish

Sculpture Supply & Installation

Water body

Electrical Work

Light Fixture Fixing Labour Only

Cable Laying Labour only

Supply & Laying Armada Cable polycabe make 2.5sqmm 4 core cable,Excavation,laying ,refilling soil as per requirement complete work Approx. qty 300 rmt at actual measurement

Road crossing

Light Fixture Supply & Install

Landscape work

Supply Lawn & Laying

Garden soil supply

Labour for Soil work

Plant Fixing Labour only

Supply of Manure/Fertiliser 50 kg bag

Plant supply all mention name below 5 feet height

Champpa 5feet to 7 Feet Height

Pebble Supply

Irrigation system

Garden irrigation system laying pvc pipes,sprinkaar, control valve required all complete work

Compressed Air & piping works

AIR COMPRESSOR

Chicago Pneumatic make 40 HP Direct Driven Screw type Air Compressor with VSD Model CPVS 40 VSD PM, with Permanent Magnet Motor in IE4 efficiency. Rated Capacity 50~142 cfm @ 13 Bar

Air Receiver 1 M3 capacity suitable for W.P. of 13 kg/cm2g Code Of Construction -2825 Material of Construction - 2062 Std Accessories – Drain Cock, Safety Valve, Pressure Gauge. External Surface – Red Oxide

CP make CPZ 250 Ref Dryer with Pre Filter – 1 micron Fine Filter – 0.01 ppm

Piping Work

PIPE STRAIGHTD40 Q=1 - Part No. 2811406604l

TEE EQUAL D40 - Part No. 2811400580

QUICKDROP PUSH FIT D40XD20 - Part No. 2811411080

CLIP PIPE D40M6 Q=1 - Part No. 2811402220L

SOCKET EQUAL D40 - Part No. 2811400280

NIPPLE SOCKET D40X1 1/2 BSPT - Part No. 2811441780

ELBOW 90 DEG. D40 - Part No. 2811400380

PIPE 20 MM 6 MTR - Part No. 2811106604L

ELBOW 90° D= 20MM - Part No. 2811100380

WALLMOUNT 20X1/2" - Part No. 2811007402

CLIP PIPE D20 M6 20PCS - Part No. 2811102220L

1/2" Brass ball valve

1 1/2" Brass Ball valve

M s Support Header

M s Support Drop

Installation Charges

External Lighting work

Supply, Installation, Testing and commissioning of Wall washer LED FIXTURE - 36W, LED, 3000K, IP 66 Light glue less with IP 68 Cable gland. The housing in light weight, made of high strength die cast aluminum and coated by static powder making it weather resistant. Protection screen in ultra-white tempered glass with high impact resistance IK07 Rated. High precision dial ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminum alloy and thermal fins. Pure Polyester powder coating in Standard Grey Color. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP66 rated. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. CRI > 90, P.F>0.9, voltage input AC100- 277V,50/60Hz. In-Built Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current. Lens made of PC. 22/30 deg. beam angle. Estimated LED Lifetime is 50,000 hours minimum. LM80 report from LED Manufacturer. Wattage : 36W Operating Voltage : AC100-277V Dimensions : L1000×W52×H76MM Housing : Extruded Aluminium Beam Angle : As per requirement CCT : 3000K IP Rating : 66 IK Rating : IK06 Operating Temperature : -30°C ~ 45°C

Supply, Installation, Testing and commissioning of LED FLOOD LIGHT FIXTURE - 36W, 3000K, IP 66 Light glue less with IP 68 Cable gland. The housing in light weight, made of high strength die cast aluminum and coated by static powder making it weather resistant. Protection screen in ultra-white tempered glass with high impact resistance IK07 Rated. High precision dial ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminum alloy and thermal fins. Pure Polyester powder coating in Standard Grey Color. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP66 rated. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. CRI > 90, P.F>0.9, voltage input AC100- 277V,50/60Hz. In-Built Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current. Lens made of PC. 22/30 deg. beam angle. Estimated LED Lifetime is 50,000 hours minimum. LM80 report from LED Manufacturer. Wattage : 36W Operating Voltage : AC100-277V Dimensions : D200xW210xH260mm Housing : Die Cast Aluminium Beam Angle : 30° CCT : 3000K IP Rating : 66 IK Rating : IK06 Operating Temperature : -30°C ~ 45°C

SITC of spike or surface mount IP66 LED spot projector with color temperature as per requirment with Luminous flux maximum 1690lm. FIxture should have body in die-cast aluminium and glass sealed optical chamber.Fixture should have wattage 10W . Fixture CRI should be > 80 .Fixture should have atleast Lumen maintenance of 115,000 hrs at L80 B10 or higher Fixture should have option of corrosion resistant coating (CRC). Fixture should have symmetric beam distribution .Fixture should be compatible with honeycomb louvre as well as coloured ring, snoot, visor and adjustable elliptical lens accessory to get the desired lighting effect and minimum glare , complete with power sypply and required accessories ( driver ,connector ,surge protection device ) Complete in all respect as per architectural design requirement and Test report / certificates of manufacturer which are to be needed is to be submitted by contractor .Make is to be approved by Department Wattage : 10W Operating Voltage : AC100-277V Dimensions : D105xH370mm Housing : Die Cast Aluminium Beam Angle : 15°/30° CCT : 3000K IP Rating : 66 IK Rating : IK06 Operating Temperature : -30°C ~ 45°C

SITC of 10W, wall embeded / step light luminaire made of die-cast aluminium alloy with higly transparent polycarbonate diffuser. Fixture should have IP rating of IP65 & IK rating of IK07. Fixture should run in 220/240V AC, 50-60Hz. Fixture should have wattage in between 10W. Fixture specifications to be:- Wattage : 10W, Operating Voltage : AC100-277V, Dimensions : L260xW245xH106mm, Housing : Die Cast Aluminium,Beam Angle : Wide Beam, CCT : 3000K IP Rating : 65,IK Rating : IK06,Operating Temperature : -30°C ~ 45°C

SITC of 12W, wall light luminaire made of die-cast aluminium alloy with higly transparent polycarbonate diffuser. Fixture should have IP rating of IP54. Fixture should run in 220/240V AC, 50-60Hz. Fixture should have wattage of 12W. Fixture specifications to be:- Wattage : 12W, Operating Voltage : AC170-260V ,Dimensions : L137xW137mm,Housing : Die Cast Aluminium, Beam Angle : Washer Optics, CCT : 3000K, IP Rating : IP54, Operating Temperature : -30°C ~ 45°C

SITC of 0.6 M high LED Bollard luminaire made of die-cast aluminium alloy with higly transparent polycarbonate diffuser. Fixture should have IP rating of IP65 & IK rating of IK07. Fixture should run in 220/240V AC, 50-60Hz. Fixture should have wattage in between 10W. Fixture specifications to be :- Wattage : 10W Operating Voltage : AC100-277V Dimensions : L600xW163xDepth57mm Housing : Die Cast Aluminium, Beam Angle : Asymmetric CCT : 3000K ,IP Rating : 65, IK Rating : IK06, Operating Temperature : -30°C ~ 45°C. Fixture should have CRI greater than 80. Fixture operating temperature range should be -10°C to +45°C. as per department design approved . Complete with all accessories (driver, connector, SPD) . Complete in all respect as per architectural design requirement and Test report / certificates of manufacturer which are to be needed is to be submitted by contractor .Make is to be approved by Department

SITC of 6 W underwater fixture as compact ultra-thin LED underwater pool light The casing of the fixture should be available of SS. IThe material of the optical window should be high grade polycarbonate glass optical window. It should offer a standard beam angle . The operating temperature should be -10° to +50° C. The fixture should provide an ingress protection of IP68.. The fixture should also have an option of various accessories including concrete pool niche, adapter, surface mount niche, surface mount right angle niche, linear pool niche, Power supply complete in all respect as per architectural design having specification as :- Wattage : 6W Operating Voltage : DC24V Dimensions : ø125xH110mm Housing : Stainless steel Beam Angle : 30° CCT : 3000K IP Rating : IP68 IK Rating : IK08 Operating Temperature : -35°C ~ 45°C Complete in all respect as per architectural design requirement and Test report / certificates of manufacturer which are to be needed is to be submitted by contractor .Make is to be approved by Department . valve

Product Type : Fitting Item Group : 15 Plafo Family : LED Indoor Plafo Aluminium Material : Aluminium Shape : Circular Height : 80mm Diameter : 300mm Surface Ceiling : yes Indoor : yes Adjustable : No Gear (type) : Built In 50Hz : yes 60Hz : yes Input Voltage : 220-240V Safety Class : I Power (Watts) : 20W IP Rating : IP44 Light Source : LED built in Dimmable : No Input Type : Constant Current Input Current : 500/600mA Voltage : 36V Safety Class : I Power (Watts) : 19,2W IP Rating : IP44 Light Source : LED built in LED Type : SMD 2835 Type : In Built Led Driver Input Voltage : 220-240V Power (Watts) : 15,6-26W Power Factor : 0,9 Constant Current : yes

SITC of 12W, wall light luminaire made of die-cast aluminium alloy with higly transparent polycarbonate diffuser. Fixture should have IP rating of IP54. Fixture should run in 220/240V AC, 50-60Hz. Fixture should have wattage of 12W. Wattage : 12W, Operating Voltage : AC170-260V, Dimensions : L137xW137mm, Housing : Die Cast Aluminium, Beam Angle : Washer Optics, CCT : 3000K, IP Rating : IP54, Operating Temperature : -30°C ~ 45°C

Slim line tub ligh with cover

IBMS System Monitoring Hardwares

Supply,Installation, Testing & Commissioning Operator Workstation Intel i9 Processor(Latest Technology) Quad core 3 GHZ Processor with 2 TB SSD, 16 GB RAM, NVIDIA® GeForce® MX450 with 2GB GDDR5 graphics memory DVD Combo Drive, Ethernet Port. With Windows License with Anti virus as per Specification.

Supply,Installation, Testing & Commissioning 32" Ultra High Definition Display LED Screen for image mirroring and /or dual display arrangement. Screen shall be plug & play type type for inputs from windos OS and wifi castting

IBMS System Software: Central Software: Software for Building Automation System (BAS) to provide detailed visual analysis through interactive tools and Total energy consumption with detailed breakup for major loads such as HVAC, Etc as per Specifications. BMS Software shall have the capacity to accommodate minimum 50000 Points. . It shall have necessary provision to Monitoring & Operation- WITH MINIMUM 2 CONCURRENT USER LICENSE. Note: This software should be support windows server and desktop Venodor should provide the licence for the next 10 years & the proposed software should be of higher version. No additional cost will be paid for the upgradation of the software at later date. System shall be compitable and support REMOTE monitoring and control of Energy Meters, AHUs , Chillers, etc.,

Supply, Integration, commissioning -Protocol Integrator with all acessories, conectors, software etc. Integration of the following systems with main BAS software: Supply, Installation, Testing & Commissioning of Multi Protocol Integrator for Integration of the third party systems defined in the Data Point IO Summary supporting multi protocols like BACnet, Modbus, Lonworks on RS485 as per technical specification with all necessary Hardware / Software required Keys / License as required. The system will warrant a Exclusive, Dedicated Protocol Integrator for every single individual 3rd party system on Each Floor (No other 3rd Party Integration shall be clubbed with any one integrator ) For Individual SystemSeparate Integrators to be considered for Separate Floors Dedicated Protocol Integrators are required for each Individual 3rd Party System Such Protocol Integrator shall Be Installed in different enclosures Each Integrator will have individual IP Connectivity to ensure redundancy Each Integrator Shall have Minimum 512MB RAM, Minimum 500Mhz Processor,Min 4GB eMMC inBuilt Memory, Covert Multiple Protocols to BACNET IP Communication Maximum Mapping Points per Integrator shall not exceed 300 points/20 Devices

HVAC Units

Energy meters

Fire Alarm System

CO2 Monitoring

Electrical Panels

Floorwise DDC Controllers for Fire /ELV Systems

DDC Controllers for Fire Fighting Pumps as per IO Summary

DDC For CHILLER UNITS & PUMPS

DDC for All other Systems including Energy meters

Sensors & Field Devices Supply, installation, testing, commissioning Complete with calibration & mounting acessories, hangers, clips , Hardwares, wires, terminals etc. Complete with BMS compitable ports & nodes :

ADPS Air DP Switch complete with tubing as required

DMTS Resolution - 0.01 Degrees Duct Mount temperature sensor with Display suitable to be connected with above DDCs. Temperature Range- -20 to 70 Deg. 0-95%RH operation.

DSPT Duct Static Pressure Transmitter with Display (30 - 1000 Pa) as required on site suitable to be connected with above DDCs

RTTS Resolution - 0.01 Degrees Room Type temperature sensor with Display suitable to be connected with above DDCs. Temperature Range- -20 to 70 Deg. 0-95%RH operation.

DMTT+Rh Resolution - 0.01 Degrees Duct Mount type T+Rh temperature sensor with Display suitable to be connected with above DDCs.Temperature Range- -20 to 70 Deg. 0-95%RH operation.

IAQ Indoor Air Quality Sensors with with Display PM 1,2.5,10, Co2, Rh, Temp Resolution - 0.01 Degrees

RTT+Rh Resolution - 0.01 Degrees Room type T+Rh temperature sensor with Display suitable to be connected with above DDCs. Temperature Range- -20 to 70 Deg. 0-95%RH operation.

ITCWTS Resolution - 0.01 Degrees Immersion Type Chilled Water Temperature Sensor with Thermowell, the stem shall be minimum of 250 mm length Thermowell with all other mounting accessories as required - For AHU & CSU Units Chilled water lines.

CO sensor at Car Park area. Range 0-5000ppm /Resolution - 1 ppm

Cabling and Conduits Supply & Laying All Cables shall be of Twisted Pair, Multistranded Annealed Tinned Copper Cables with FRLSH inner sheath, ZHFRLS outer sheath, ZHFRLS insulation & Al-Mylar Screened with drain wire with IP 54 ABS Plastic Junction Box Din rail mounted Elmex Terminals.

1P x 16 AWG Unscreened

1P x 18 AWG Screened

2P x 18 AWG Screened

4P x 20 AWG Unscreened

4P x 20 AWG Screened

Supply, Laying, commissioning CAT 6 Gigabit Cable with all accessories - Systemax/Rosenberger Makes

Termination of Cat 6 Cable Termination of CAT6a cable. Cost including jack/socket, tagging, as directed by the site engineer/ consultant/Client

Supply & installation of following items with all acessories, mounting bracket/ suspenders, saddles, fixing hardware etc. as required as per site condition

25mm Dia Heavy Grade GI Conduits

20mm Dia Heavy Grade GI Conduits

32mm Dia Heavy Grade GI Conduits

100mm PE 80 uPVC Pipes -

Following GI Cable trays/Truncking with wall/ceiling mounted C clamps.

GI Perforated Cable trays -100 mm x 35mm (12AWG) - powder coated finish

GI Perforated Cable trays -200mmx 35mm (14AWG) -powder coated

GI Perforated Cable trays -300mmx 35mm (16AWG) -powder coated

GI Perforated Cable trays -400mmx 35mm (18AWG) -powder coated

Powder Coated 18 Gauge Truncking with cover - 200 x 50mm - power coated

Supply, installation, Testing and commissioning Domestic water supply Meter as approved by Govt. liasioing body / water department. Meter shall be complete with BMS ports and all mounting acessories and fixing hardwares (Dia 25 to 50mm)

SPRINKLER

FIRE MODE SPRINKLER SYSTEM Supply, installation Testing and commissioning [Make : Tyco / viking ] Brass quartzoid quick respose type sprinklers of 15 mm dia, K80, suitable for sustaining the pressure on the seat & water hammer effect. The type & temperature rating shall be as follows, complete with adjutsable/ fixed mounting dish/ rosette plate

Pendent sprinkler 68°c Water Sprinkler head (Pendent Type)

Pendent sprinkler [Concealed type] 68° c Water Sprinkler head (Concealed Type)

Upright sprinkler 68°c Water Sprinkler (Upright Type)

Sidewall sprinkler 68°c Water Sprinkler (sidewall Type)

Supply, installation Testing and commissioning Following sizes of MS class conforming to IS: 1239 part-I / 1974 and/Or part II / 1979 with all accessories like fittings including expansion joint, tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer complete with supporting/fixing the pipe on floor / wall /ceiling with clamps, MS angle support/Hanger (using anchor fasteners) as called for. Note: All joints shall be with socket weld type unless until sprcified

150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

Supply, installation Testing and commissioning [Flexible dropper] Following U.L.listed corrugated SS-304 braided flexible sprinkler pipe droplet for 12 kg/ sq. cm. working pressure with 1/2" BSP threaded outlet & 1" BSP threaded inlet with reducer nipple, snap, clamp, T-bar bracket etc. with necessary fitting complete as required.

Supply, installation Testing and commissioning [Butter fly valves] Following Butterfly valve [Body -Grey Cast Iron | Shaft- SS | Disc - SG Iron (Rilson coated) | Liner : HT - EPDM | BS : 5155 Working pressure not less than 16 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. Cost incuding supervisory switch with all acessories [Note: Hand Lever operated upto 150mm dia & Gear box operated above 150mm]

150mm Dia

Supply, installation Testing and commissioning Providing & fixing 25mm dia. Flush line connections as per details and requirement

Testing & Commissioning Charges Providing Pressure testing for min. 24 hrs with as directed on site on all levels by Client/ Engineer / Consultant /Archittect

PORTABLE TYPE FIRE EXTINGUISHERS

Supply, installation with testing Following types of extinguisher with provision of wall bracket (fixed with anchor fastener).with approved fixed signage as per code.

Supply, installation with testing [FAT] [Carbon-di-Oxide Type] ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type of following capacity. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of not more than 0.667 and wall suspension bracket / Floor stand as required

4.5 kg capacity

9.0 kg capacity

Supply, installation with testing [ABC type] ABC Powder Fire Extinguisher containing Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & CO2 Mig welded SS, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006

4.0kg capacity

Supply, installation with testing [FAT] [Ceiling Mount Extinguisher] [Electrical room/Hub Room] FE36 Clean Agent MODULAR type 10 kg capacity Ceiling Mount fire extinguisher , Test pressure 30 bar, Anti-corrosive Treatment, Shell Diameter 300 mm, Overall Height 400mm, Bulb Temperature 68°C, Charged Weight 16kgs, Charged Pressure 15 bar

Supply, installation with testing [K type Extinguisher] [Kitchen/ Cooking Area] Class K Type fire extinguisher of below mentioned Capacity, Brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, with Floor Mount and Triangle type auto glow fire extinguisher sign board, etc. complete, confirming to standards & IS 15683 with floor stands as per New BIS and as per technical specification with all mounting accessories complete as required. 9 kgs for oil frying area as per NFPA 10 and NBC part 4

Drawings/records Preparation of all records, drawings and submitting all "As BUILT" documentation to Client.

ELECTRICAL PANEL FIRE PROTECTION SYSTEM WORKS :

Supply, installation, Testing & Commissioning Extinguishing Agent [2 Kgs] 2 Kg Clean Agent FK-5-1-12 (UL Listed) with Zero Ozone Depletion Potential , EPA & SNAP Approved Can : Stored Pressure type Deep drawn and Argon welded , M.S, Sheet metal thickness 1.5 mm Type, 100% Hydraulic Pressure tested. Can as per IS:15683 Valve : The valve DLP shall be nickel plated brass equipped with a pressure gauge to monitor the system pressure, with a ball valve interfacing the tubing and the cylinder, Working pressure 10-18 bar

Supply, installation, Testing & Commissioning Extinguishing Agent [4 Kgs] 4 Kg Clean Agent FK-5-1-12 (UL Listed) with Zero Ozone Depletion Potential , EPA & SNAP Approved Can : Stored Pressure type Deep drawn and Argon welded , M.S, Sheet metal thickness 1.5 mm Type, 100% Hydraulic Pressure tested. Can as per IS:15683 Valve : The valve DLP shall be nickel plated brass equipped with a pressure gauge to monitor the system pressure, with a ball valve interfacing the tubing and the cylinder, Working pressure 10-18 bar

Supply, installation, Testing & Commissioning Tube for automatic fire detection and suppression system made by special modified Polyamide (PA), Color Red RAL300, High grade quality, Inner diameter 4mm, OuterDiameter 6 MM, Melting Point approx. 222°C, when heating up with 10K/minute, Burst Pressure 100 bar at 20°C. Temperature range : - 40°C to +80°C. Working Pressure 20Bar at 20°C. Burst Temperature : when Pressurised with dry Nitrogen at 16 bar pressure approx 100°C to 110°C, UL approved as per UL 521 STANDARD FOR HEAT DETECTORS FOR FIRE PROTECTIVE SIGNALING SYSTEMS

Supply, installation, Testing & Commissioning End of Line adopter End of Line adapter with Pressure gauge for Automatic fire suppression tube used for fitting at the end of the tube for pressurizing and re pressurizing the tube includes check Valve, Pressure Gauge and fitting to connect to sensor tubing. Tube connection 6mm, length 2.77``/71mm, Gauge scale :0-20 bar. Fitting made by brass (plated /unplated), Stainless steel, Elastomeric Sealings, Copper Nickle plated, Temperature range TS -20 Deg C till + 60 Deg C, made as per PED Pressure Equipment Directives.

Supply, installation, Testing & Commissioning [Pressure switch] Pressure Switch to monitor Pressure drop in the tube, switch point 5 Bars. Switch Type SPST, Normally Open, Electric Rating : 120/240 VAC-375VA, 24 VAC-125 VA, Open 160 psi y-7, Close 185 psi y-5,Pressure switch + adaptor / 5bar / M10x1

Supply, installation, Testing & Commissioning Master Control Unit with all power supply, signal processing unit to be compitable with the tubing system

Narsi Interior Infrastructures Pvt Ltd